• 소음진동
• /
• 제5권1호
• /
• pp.85-93
• /
• 1995

The vibration of the dehydration process in a washing machine is important problem that affects the performance of products. In this paper, the upper structure of a washing machine is modeled as rigid body suspension system and, by numerical analysis, the amplitude of a spin basket and the transfer moment at a base plate are calculated. To examine the vibrational characteristics according to design variable change, the friction coefficient in anubber, the radius of curvature, the stiffness coefficient, initial length and locations of support springs are considered in the analysis. Experimental results are compared with those of analysis.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.83-90
• /
• 2002

In this study, the compliance measurement and cutting operation in tool - machine tool - workpiece system were carried out for the parameters identification of chatter vibration in turning.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.403-412
• /
• 2002

Machine condition diagnosis is the technique to perceive the machine errors and the abrasion online without overhaul. We need the steps to predict the life span and reliability of a machine for the abrasion as with perceiving the degree of the abrasion of certain machine parts to make errors. In this study we deals with the methods to check and manage periodically and to configure the judgement criteria for the state of a machine. For the applications of CDT(Condition Diagnosis Technique) we also suggest the methods to check comparing the measured vibration values with the absolute criteria and to check the abnormality by vibration level.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.238-241
• /
• 2006

For the effective reduction of structural vibration level it is important to obtain the exciting force components. But, sometimes direct force measurement is infeasible due to the geometric limitation of sensor placement. In this case, indirect force identification becomes useful tool for obtaining input force information. In this paper, indirect force technique was applied to air-jet weaving machine and shows some numerical results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.359-360
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1154-1160
• /
• 2000

This paper reports the development of a special impact fatigue test machine for high pressure vessels. The targeted vessels are subjected to shock pressures equivalent of explosions. This severe loading condition brings many difficulties to the design of test machine. Unfortunately, there are very rare such test machine in the world, and more worse, the machine is not opened and sold.

• 소음진동
• /
• 제9권1호
• /
• pp.49-59
• /
• 1999

The mechanism of Stewart platform has many advantages for kinematic analysis and control. Thus there have been many research about employing this mechanism in the new type of machine tool. Since the vibration caused during the manufacturing process has a severely adverse effect on the machining precision. it is very important to enhance the vibrational characteristics. However. it is not easy to use finite element model for the vibration analysis. That is because the vibration behaviors of the structure vary in a complicated manner according as the length of links varies. In this paper, a Stewart platform type of machine tool is modeled in finite element method and then updated by using the experimental modal data. Finally. the static and dynamic characteristics of the finite element model are predicted and then discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.883-887
• /
• 2002

We should maintain the maximum operation capacity for production facilities and find properly out the fault of each equipment rapidly in order to decrease a loss caused by its failure. The acoustic and vibration signals of a machine always carry the dynamic information of the machine. These signals are very useful fur the feature extraction and fault diagnosis. We performed a fundamental study which develops a system of fault diagnosis for a pump. We experimented vibrations by acceleration sensors and noises by microphones, compared and analysed for normal products, artificially deformed products. We tried to search a change of the dynamic signals according to machine malfunctions and analyse the type of deformation or failure. The results showed that acoustic signals as well as vibration signals can be used as a simple method lot a detection of machine malfunction or fault diagnosis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.14-19
• /
• 2000

A machine tool has some serous stability problem in the from of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerate machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, in order to moni색 of the chatter vibration on the cutting process, the behavior of spectral density of AE signal and principal cutting force signal has been investigated. Furthermore, its reliability from obtained the results has been studied to evaluate and confirm the proposed method with the application procedure and the experimental results.

• 소음진동
• /
• 제6권6호
• /
• pp.727-733
• /
• 1996

Machines installed in various structures emit airborne sound and structureborne sound and are major source of noise and vibration. Especially when machines are installed upon a flexible foundation, most of noise and vibration are due to transmission of structureborne sound. Therefore, characterization and measurement of structureborne sound source level are necessary for controlling noise and vibration. But structureborne sound from vibrating machine is strongly coupled to the supportingstructure. This paper proposes the method of estimating the supporting sturcture's dynamic character- istic and structureborne sound source level for machine installed system without separating the machine, resilient mount and foundation.