• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2495-2497
• /
• 2004

A system, featuring the hybrid isolator for control in the vertical direction, of active microvibration control was proposed. The main components of this system are a stage vibration isolation table with built-in acceleration sensors for detecting microvibration, hybrid isolators and a digital controller with high precision signal converters. The vibration control algorithm is focused on settling-time critical application and feedback/feedforward combination.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.48.4-48
• /
• 2002

1) A method to realize active vibration control using SAC and acceleration type sensor is proposed from the viewpoint of practical application. 2) The use of acceleration type sensor makes it easy to satisfy ASPR condition in applying SAC system and to implement sensor in practical mechanical system. 3) Results were confirmed through numerical simulation of 1 DOF vibration system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1178-1183
• /
• 1990

A digital signal processor(DSP) is applied to realizing a compensator of control system of active magnetic bearings, to restrict a resonance caused by the first-order bending vibration of a flexible rotor, and to run the rotor beyond the critical speed. A full-order observer is applied to the translatory rotor-motion with the first-order vibration mode. A PID control is used for the conical motion. The rotor used in the experiments is symmetric, and an electromagnet and a displacement sensor are set in collocation.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.30-46
• /
• 2001

• Computational Structural Engineering : An International Journal
• /
• v.3 no.1
• /
• pp.61-68
• /
• 2003

A recently developed semi-active control system employing magneto-rheological (MR) fluid dampers is applied to vibration control of a wind excited tall building. The semi-active control system with MR fluid dampers appears to have the reliability of passive control devices and the adaptability of fully active control systems. The system requires only small power source, which is critical during severe events, when the main power source may fail. Numerical simulation studies are performed to demonstrate the efficiency of the MR dampers on the third ASCE benchmark problem. Multiple MR dampers are assumed to be installed in the 76-story building. Genetic algorithm is applied to determine the optimal locations and capacities of the MR dampers. Clipped optimal controller is designed to control the MR dampers based on the acceleration feedback. To verify the robustness with respect to the variation of the external wind force, several cases with different wind forces are considered in the numerical simulation. Simulation results show that the semi-actively controlled MR dampers can effectively reduce both the peak and RMS responses the tall building under various wind force conditions. The control performance of the MR dampers for wind is found to be fairly similar to the performance of an active tuned mass damper.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.435-451
• /
• 2014

In this paper, we investigate the vibration control of multimodal structures and present an efficient control law that requires less energy supply than active strategies. This strategy is called modal global semi-active control and is designed to work as effectively as the active control and consume less power which represents its major limitation. The proposed law is based on an energetic management of the optimal law such that the controller follows this latter only if there is sufficient energy which will be extracted directly from the system vibrations itself. The control algorithm is presented and validated for a cantilever beam structure subjected to external perturbations. Comparisons between the proposed law performances and those obtained by independent modal space control (IMSC) and semi-active control schemes are offered.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.28-40
• /
• 2015

This paper aims to address the intelligent active vibration control problem of a flexible rectangular plate vibration involving parameter variation and external disturbance. An adaptive sliding mode (ASM) MIMO control strategy and smart piezoelectric materials are proposed as a solution, where the controller design can deal with problems of an external disturbance and parametric uncertainty in system. Compared with the current 'classical' control design, the proposed ASM MIMO control strategy design has two advantages. First, unlike existing classical control algorithms, where only low intelligence of the vibration control system is achieved, this paper shows that high intelligent of the vibration control system can be realized by the ASM MIMO control strategy and smart piezoelectric materials. Second, the system performance is improved due to two additional terms obtained in the active vibration control system. Detailed design principle and rigorous stability analysis are provided. Finally, experiments and simulations were used to verify the effectiveness of the proposed strategy using a hardware prototype based on NI instruments, a MATLAB/SIMULINK platform, and smart piezoelectric materials.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2251-2253
• /
• 2003

This paper is concerned with the active vibration control of flexible cantilever beam system using electromagnetic force actuator. The main objective of this paper is to propose the control algorithms and implement the experimental setups for active vibration control. Several control algorithms are proposed and implemented on the experimental setups to show their efficacy. These include a PID control design, an optimal $H_2$ control design, and a fuzzy PID control design. Effectiveness and performance of the designed controller were verified by both simulation and experiment results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.12
• /
• pp.950-955
• /
• 2002

The coupled finite/boundary element method is used in numerical analysis for acoustic radiation from the vibration of rectangular composite plate which is simply supported. This analysis is validated using the Wallace equation for an isotropic plate. Active control of sound fields has been tarried out using 3 pairs of piezoelectric sensor/actuator and a pair of viscoelastic material by Passive constrained layer damping treatment. The results show that the optimal placement of piezoelectric sensor/actuator and VE patch is required to control the sound fields from a vibrating composite plate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.3
• /
• pp.24-32
• /
• 2007

In this research, using Terfenol-D actuator composed of magnetostrictive material as shaker and controller, active vibration control theory was applied and verified by experiments. PPF(positive Position Feedback) algorithm which is effective for the control of low frequency vibration was used for the control of a structure. Responses of inputs due to various design variable used for the PPF filter were observed. To investigate the characteristics of magnetostrictive materials, actuator responses were measured for known inputs and satisfactory results were obtained to reduce the vibration level after applying the control input for the actuator.