• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.115-120
• /
• 2003

This study aims at calculating berth length required of the given volume of containers. For this, unlike previous studies assuming 300,000 TEU per berth as the capacity of a berth, this study attempts to apply more realistic situation such as the distribution of vessel size, lifts per vessel, berth time by vessel size, and average berth occupancy ratio. the result are compared with that of Pusan New port planning.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.33-34
• /
• 2006

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.332-338
• /
• 2018

To perform the Maritime Safety Audi Scheme, $10^{-4}$ was constantly applied without adjustment when evaluating the proximity of the fairway. The necessity of applying the different aberrancy probabilities from the different proximity of the fairway depending on the shape of the route and the size of the ship was validated using marine simulations. Marine simulation was performed to evaluate the validity of statistical analysis-based aberrancy probability according to the different shapes of routes and ship size presented in the previous study. As results, the validity of the criterion of the statistical analysis-based aberrancy probability was confirmed by comparing with the results of simulation-based aberrancy probabilities. The results support that the aberrancy probabilities by the types of a vessel could be different based on the type and size of vessels. The results motivate that further investigation is required to find the reasonable criteria of the aberrancy probabilities for the maritime traffic safety audit according to the fairway shape and the size of the vessel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1693-1699
• /
• 2011

In this paper, for magnetic silence technology of naval vessel, is to make lab deperm system and to evaluate the deperm capacity of naval vessel regarding deperm protocol. Initial permanent magnetic field of naval vessel is magnetized before deperm, having the magnetic field of the same size, to evaluate the deperm capacity regarding a variety of deperm protocol for experimental reliability growth. Current dead time effect of deperm protocol is measured at the different initial current, which are 8A, 6A and 4A respectively. Furthermore, the experiment under the same condition except changing duty cycle into 50% is carried out. As a result, it is possible to compare the six different experiment outcomes. The result shows that the experiment with dead time improve the deperm capacity more than 48.51 percent comparing to the case without dead time.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.561-565
• /
• 2014

This paper is mainly concerned with the interaction effects between two vessels and sidewall with a mound. Experimental study on hydrodynamic forces between ship and sidewall with a mound was already shown in the previous paper, measured by varying the distances between ship and sidewall. The ship maneuvering simulation was conducted to find out the minimum safe distance between vessels, which is needed to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. When and if one vessel passes the other vessel through the proximity of sidewall with a mound, the spacing between two vessels is needed for the velocity ratio of 1.2, compared to the case of 1.5. Also, for the case of ship-size estimation, the ship maneuvering motion is more affected by interaction effects for the overtaken small vessel, compared to the overtaking large vessel.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.40-49
• /
• 2019

In this paper, failure probabilities of the OPR1000 reactor vessel under pressurized thermal shock (PTS) were estimated using the probabilistic fracture mechanics code, R-PIE. Input variables of initial crack distribution, crack size, copper contents, and upper shelf toughness were selected for the sensitivity analyses. A wide range of the input data were considered. Through-wall cracking frequencies determined by the product of the vessel failure probability and the corresponding occurrence frequency of the transient were also compared to the acceptance criterion. The results showed that transient history had the most significant impact on the vessel failure probability. Moreover, conservative assumptions resulted in extremely high through-wall cracking frequencies.

• Journal of Plant Biology
• /
• v.26 no.1
• /
• pp.7-16
• /
• 1983

Internodal vessel elements are studied in 20 genera, 75 species and 33 cultivars of Hibiscus rosa-sinensis belong to the Malvaceae. The minimum and maximum length and diameter range from 79~466 and 14~88 ${\mu}{\textrm}{m}$, respectively. The vessel elements are either cylindrical, fusiform, conical, clavate, oval, column-, drum-, fish and cup-like or erratic. Perforation plates are exclusively simple in all the species investigated, except occasionally scalariform in varieties of Hibiscus rosa-sinensis. In most of the species studied vessel elements have predominantly two perforation plates or occasionally one and three. Adjacen side wall thickening is commonly simple and border pitted, mixed, scalariform, helical and reticulate. The vessel elements vary in their size, shape, number and inclination of perforation plates and adjacent wall thickening.

• Journal of Veterinary Clinics
• /
• v.20 no.4
• /
• pp.508-515
• /
• 2003

A 4-month-old 5.7 kg male Golden retriever with history of seizure, depression, lethargy and anorexia was referred to Veterinary Medical Teaching Hospital, Chungbuk National University. Hematologic examination revealed microcytosis and nonregenerative anemia. Serum chemical values showed increased serum ammonia (423 $\mu$mol/L), ALP (1101 U/L), r-GTP (13.9 U/L) and CPK (1454 U/L), and decreased total protein (4.9 g/dl) and BUN (1.6 mg/dl). Microhepatia was shown in survey abdominal radiographs. Color doppler ultrasonographic examination revealed dilated tortuous vein with turbulent flow within liver parenchyma. Intraoperative jejunoportography and intraoperative ultrasonography confirmed the location and size of single intrahepatic shunt vessel in the left medial liver lobe. Also, the anomalous vessel entering the caudal vena cava was identified beneath the diaphragm. The shunting vessel was ligated with using an Ameroid constrictor. General conditions, hematologic and serum chemical values resolved gradually after surgery. One month after surgery abdominal radiograph showed normal gastric axis and it was consistent whit the normal size liver. Normal echogenecity of liver and enlargement of portal vein were shown in ultrasonography. It is assumed that survey radiography and ultrasonography are useful for diagnosis of single intrahepatic shunt in a dog and especially jejunoportography vein portography and intraoperative ultrasonography are suitable for confirmation of the anatomic location and size of the shunting vessels.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.1
• /
• pp.39-48
• /
• 2011

Uses a Tomographic scan image and Table Object Distance(TOD) price after measuring, uses accuracy and usability of blood vessel diameter(Vessel Diameter) measurement under comparison evaluating boil TOD Calibration. The patient who enforces Prosecuting Attorney abdomen Tomographic scan in the object the superior mesentery artery uses PACS View from abdomen fault image and from blood vessel diameter and the table measures the height until of the blood vessel. Uses Angio Catheter from Angiography(5 Fr.) and enforces is measured from PACS View the height until of the table which and the blood vessel at TOD Calibration price and the size of the superior mesentery artery inputs measures an superior mesentery artery building skill. Catheter Calibration input Agnio Catheter where uses in Angiography the size of the superior mesentery artery at Catheter Calibration price and they measure. Produced an accuracy from monitoring data and comparison evaluated. The statistical program used SPSS. TOD Calibration accuracy was 96.53%, standard deviation is 0.03829. Catheter Calibration accuracy of 92.91%, standard deviation is 0.05085. Represents a statistically significant difference(p = 0). According to age and gender was not statistically significant(p > 0.05). TOD Calibration correlation coefficient R-squared of 88.8%, Catheter Calibration of the R-squared is 75.5%. High accuracy of both methods. Through this study, CT images using the measured distance between the table and the Object, TOD Calibration accuracy higher than two Catheter Calibration was measured. TOD and Catheter Calibration represents a statistically significant difference(p = 0).

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.28-33
• /
• 2014

The Korean icebreaking research vessel "Araon" performed four sea trials in the Arctic and Antarctic Seas. The ice properties, such as the ice thickness, floe size, ice strength, and power of the vessel were quite different in these trials. To compare the speeds of ship with the same ice strength and power, the AARC (Arker Arctic Research Center) method is used with a vessel power of 10 MW and an ice strength of 630 Pa in this paper. Based on the analysis results, the speed of the ship was 1.62 knots (0.83 m/s) with a 1.02-m ice thickness and 2.5-km floe size, 5.3 knots (2.73 m/s) with a 1.2-m ice thickness and 1.0-km floe size, and 13.8 knots (7.10 m/s) with a 1.1-m ice thickness and 200-m floe size. The analysis results showed that the ship speed and floe size have an inversely proportional relationship. Two reasonable reasons are given in this paper for the final result. One is an ice breaking phenomenon, and the other is the effect of the ice floe mass. For the breaking phenomenon, the ice breaking force is very small because the ice floe is not breaking but tearing when a ship is passing through a small ice floe. Regarding the effect of the ice floe mass, it is impossible for a ship to push and tear an ice floe if the mass of the ice floe is too large compared to the mass of the ship. The velocity of the ship decreases when the ice floe has a large mass and a large size because the ship has to break the ice floe to move forward.