• 제목/요약/키워드: vertical sorting

검색결과 20건 처리시간 0.026초

프레임간 차영상 블록의 적응분류에 의한 영상시퀀스 압축 (Image Sequence Compression based on Adaptive Classification of Interframe Difference Image Blocks)

  • 안철준;공성곤
    • 한국지능시스템학회논문지
    • /
    • 제8권6호
    • /
    • pp.122-128
    • /
    • 1998
  • 이 논문에서는 영상시퀀스의 프레임간 차영상 블록을 영상활동도의 크기 및 분포에 따라 적응적으로 분류함으로써 영상시퀀스를 압축하는 기법을 제안한다. 활동도의 크기에 의한 분류에서는 차영상 블록에 포함되어 있는 물체의 에지부분에 해당하는 활동블록과 비활동 블록으로 분류하고, 활동도의 분포에 의한 분류에서도 활동블록들을 이산 코사인변환계수의 분포정도를 특징으로 하여 수직, 수평, 저활동 블록으로 분류한다. 대표적인 분류결과를 이용하여 RBFN 신경망을 학습시켜 프레임간 차영상 블록들의 비선형적인 분류 특성을 얻었다. 시뮬레이션 결과 RBFN을 이용한 차영상 블록의 분류가 영상활동도의 정렬방법이나 다층퍼셉트론 신경망(MLP)에 비해 영상시퀀스의 압축성능이 향상되었다.

  • PDF

서해 근소만-선유도 갯벌 퇴적층의 지온변화에 관한 연구 (Soil Temperature Variations in Intertidal Sediments in Geunso Bay and Seonyu Island, West Coast of Korea)

  • 송규민
    • Ocean and Polar Research
    • /
    • 제35권4호
    • /
    • pp.281-290
    • /
    • 2013
  • The vertical structure of sediment temperatures in the tidal flats of Geunso Bay and Seonyu Island in western Korea were measured for more than a year and analyzed. Mean temperature decreased with depth in spring and summer. On the contrary, it increased with depth in fall and winter, faithfully reflecting the seasonal variation resulting from the heating and cooling of the surface sediment. The surface sediment temperatures are shown to be strongly dependent on solar radiation, M2, and M4 tidal components. They are also weakly affected by precipitation. Thermal diffusivity of sediment is estimated at each depth and in each of the four seasons by applying the amplitude equation method. In Geunso Bay, the estimated seasonal-mean values decreased with depth, while they showed little change in Seonyu Island. Depth-averaged thermal diffusivity in Geunso Bay ($1.94 {\times}10^{-7}m^2/s$) was smaller than Seonyu Island ($2.20 {\times}10^{-7}m^2/s$). The variability of thermal diffusivity is shown to corelate with sediment composition and sorting from the grain-size analysis of intertidal sediments in Geunso Bay and Seonyu-do.

NSGA-II를 통한 딤플채널의 다중목적함수 최적화 (Multi-Objective Optimization of a Dimpled Channel Using NSGA-II)

  • 이기돈;압두스 사마드;김광용
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.113-116
    • /
    • 2008
  • This work presents numerical optimization for design of staggered arrays of dimples printed on opposite surfaces of a cooling channel with a fast and elitist Non-Dominated Sorting of Genetic Algorithm (NSGA-II) of multi-objective optimization. As Pareto optimal front produces a set of optimal solutions, the trends of objective functions with design variables are predicted by hybrid multi-objective evolutionary algorithm. The problem is defined by three non-dimensional geometric design variables composed of dimpled channel height, dimple print diameter, dimple spacing and dimple depth to maximize heat transfer rate compromising with pressure drop. Twenty designs generated by Latin hypercube sampling were evaluated by Reynolds-averaged Navier-Stokes solver and the evaluated objectives were used to construct Pareto optimal front through hybrid multi-objective evolutionary algorithm. The optimum designs were grouped by k-mean clustering technique and some of the clustered points were evaluated by flow analysis. With increase in dimple depth, heat transfer rate increases and at the same time pressure drop also increases, while opposite behavior is obtained for the dimple spacing. The heat transfer performance is related to the vertical motion of the flow and the reattachment length in the dimple.

  • PDF

Multi-objective optimization of printed circuit heat exchanger with airfoil fins based on the improved PSO-BP neural network and the NSGA-II algorithm

  • Jiabing Wang;Linlang Zeng;Kun Yang
    • Nuclear Engineering and Technology
    • /
    • 제55권6호
    • /
    • pp.2125-2138
    • /
    • 2023
  • The printed circuit heat exchanger (PCHE) with airfoil fins has the benefits of high compactness, high efficiency and superior heat transfer performance. A novel multi-objective optimization approach is presented to design the airfoil fin PCHE in this paper. Three optimization design variables (the vertical number, the horizontal number and the staggered number) are obtained by means of dimensionless airfoil fin arrangement parameters. And the optimization objective is to maximize the Nusselt number (Nu) and minimize the Fanning friction factor (f). Firstly, in order to investigate the impact of design variables on the thermal-hydraulic performance, a parametric study via the design of experiments is proposed. Subsequently, the relationships between three optimization design variables and two objective functions (Nu and f) are characterized by an improved particle swarm optimization-backpropagation artificial neural network. Finally, a multi-objective optimization is used to construct the Pareto optimal front, in which the non-dominated sorting genetic algorithm II is used. The comprehensive performance is found to be the best when the airfoil fins are completely staggered arrangement. And the best compromise solution based on the TOPSIS method is identified as the optimal solution, which can achieve the requirement of high heat transfer performance and low flow resistance.

울산 사연호 상류의 퇴적지형 발달 (Development of Depositional Landforms in Upstream Reach of Ulsan Sayeon Dam Lake)

  • 장문기
    • 한국지역지리학회지
    • /
    • 제13권4호
    • /
    • pp.409-421
    • /
    • 2007
  • 본 연구는 1964년 사연댐 건설 이후에 사연호 상류부에 형성된 퇴적지형의 형성과정과 퇴적환경을 고찰하였다. 이를 위하여 퇴적지형의 형태적 특성과 퇴적물의 입경분포를 분석한 결과는 다음과 같다. 첫째, 퇴적지형은 수면하 퇴적지 A B와 하중 퇴적지인 C D, 그리고 지류 연안 퇴적지 E로 구분된다. 둘째, 퇴적지형은 유로를 따라 길게 나타나며, 상류에서 높고 하류로 갈수록 낮아진다. 또한 퇴적지형은 유로에서 멀어질수록 고도가 증가하나, A에서는 유로와 가까운 부분이 먼 곳보다 높아 수면 아래의 자연제방으로 이해된다. 셋째, A와 B의 경우에는 유로에서 멀어지면서 세립화 하는 경향이 나타난다. 운반양식의 경우에도 유로에서 멀어질수록 부유하중의 비율이 높아진다. 넷째, 퇴적물의 분급은 수시로 변하는 수위의 영향을 받아 불량 내지 매우 불량하다. 다섯째, A와 B는 수면 아래에서 유로를 따라 운반되는 퇴적물이 유로에서 멀리 확산되어 수직퇴적으로 형성된 것이다. C와 D는 수위가 하강할 때 하상하중의 형태로 운반된 퇴적물이 쌓인 것이다. 그리고 E는 수위 상승 시 지류에 정체수역이 형성됨으로써 수직퇴적된 것이다.

  • PDF

동해 울릉분지 남서해역 해양투기장의 퇴적물 특성 (Sediment Characteristics of Waste Disposal Sites in the Southwestern UUeung Basin, the East Sea)

  • 천종화;허식;한상준;신동혁;정대교;홍기훈;김석현
    • 한국해양학회지:바다
    • /
    • 제4권4호
    • /
    • pp.312-322
    • /
    • 1999
  • 동해 울릉분지 남서측 해양투기장해역의 퇴적환경을 밝히기 위하여 해저지형과 퇴적물 특성을 조사하였다. 울릉분지 남서측 외대륙붕에 위치한 해양투기장 정해역은 팔림세스트(palimpsest) 퇴적물과 니질퇴적물의 교호퇴적상이 두껍게 나타난다. 울릉분지 남서측 대륙사면에 위치한 병해역은 대륙붕단으로부터 사질퇴적물의 간헐적인 유입을 제외하고는 반원양성 입자들의 수직적인 집적에 의해서 유동성이 큰 니질퇴적물(fluidized mud)이 해저지형을 평행하게 피복한다. 정해역과 병해역에서의 시추퇴적물에서는 저서생물의 교란에 의한 생흔구조들이 다수 관찰되며, 이에 의해서 퇴적물의 수직적인 혼합이 우세하게 일어난다. 표층퇴적물은 잔류퇴적물의 재동에 의한 조립질의 팔림세스트와 세립질퇴적물의 상대적 함량, 분급도, 그리고 중광물 특성들에 의해서 네 종류의 사질퇴적물(S-1, S-2, S-3, S-4)과 두 종류의 니질퇴적물(M-1, M-2)로 구분된다. 사질퇴적물들은 대부분이 태풍 또는 폭풍우로 야기된 고에너지 환경하에서 잔류퇴적물로부터 제동된 것으로 해석된다. 이에 반해 니질 퇴적물은 낙동강에서 유입된 현생 퇴적물, 대륙붕에서 재동된 세립질퇴적물, 그리고 동한난류(East Sea Warm Current)에 의해서 뜬짐으로 공급되는 입자성 부유물질 등으로 다양한 기원을 가진다.

  • PDF

충청남도 금산군 일대 제4기 지질 및 골재자원 분포 특성 (Distribution Characteristics of Quaternary Geology and Aggregate Resources in Geumsan-gun, Chungcheongnam-do)

  • 김진철;김주용;이진영
    • 자원환경지질
    • /
    • 제54권5호
    • /
    • pp.595-603
    • /
    • 2021
  • 하천 및 육상 골재 자원의 주 대상인 모래층의 분포는 제4기 퇴적 환경 중 충적 및 하천 퇴적환경에 주로 속한다. 충청남도 금산군 일대의 골재 자원 분포는 특징적으로 감입곡류 하천이 우세한 퇴적 환경 중심으로 발달하고 있는 반면, 붕적이나 선상지성 퇴적환경에서 형성된 퇴적층은 육상 및 하천 골재 분포 비율이 상대적으로 낮다. 봉황천 주변과 소하천들이 합류하는 부근 일대는 소규모이지만 하천의 범람원이 발달하며 골재 분포 지역에 해당된다. 금산군 제4기 퇴적층의 수직 분포는 약 5~12m 범위와 평균 8m의 제4기 퇴적층 두께를 갖는다. 골재 부존 구간은 평균 3.6m 두께이며 평균 입도는 점토-실트 약 21%, 모래 67%, 그리고 자갈 12%이다. 골재 부존 구간의 주요 특징은 조립질 모래가 우세하고 자갈은 아각형 또는 아원형, 분급은 일반적으로 불량하고 괴상의 형태를 띠며 암회색~황갈색 범위의 토색을 보인다. 금산군 내에서 골재 개발 가능성이 큰 분포 지역은 금강본류, 봉황천과 소하천 지류의 현 하상과 구하상을 따라 분포하는 충적 퇴적층 및 하천 퇴적층이다.

백두산 일대에 나타나는 구조토 보고 (A Report on Patterned Ground in the Baekdusan)

  • 최인숙;성영배;김종욱;박승필;이춘경
    • 한국지형학회지
    • /
    • 제17권1호
    • /
    • pp.59-72
    • /
    • 2010
  • 본 연구는 백두산 북부 지역의 현장 조사를 통해 발견된 구조토의 형태적 특징과 구성물질의 특징을 밝히는 것을 목적으로 하고 있다. 백두산 북부 지역의 두 지역, 소천지 남서부 지역과 달문 서사면에서 구조토가 발견되었다. 달문 서사면에서 발견된 구조토는 거력들에 의해 중앙의 미립물질을 둘러싼 분급 형태를 보이고 있으며 전체적으로는 사면의 방향을 따라 계단형의 구조토가 분포하고 있다. 반면 소천지 남서부에 분포하는 구조토는 사면의 방향에 따라 원형, 다각형, 선형 등의 다양한 형태가 발견되고 있다. 이들의 장경 평균은 163cm, 단경 평균은 91cm이다. 개체에 따라 정도의 차이가 있지만 전체적으로 구조토의 표면 구성물질의 입자 크기는 중앙에서 외곽으로 갈수록 커지는 현상을 보이고 있다. 구성 물질의 분포는 실트의 비율이 매우 높아 토양의 동결과 융해 작용에 매우 민감하며 점토 비율이 10% 미만으로 매우 낮아 화학적 풍화보다 기계적 풍화가 우세한 것으로 판단된다. 아울러, 토양단면을 살펴보면 구조토의 내부에서 토양요동현상(Cryoturbation)에 의한 토층의 요동구조(Involution)가 발견되며 지하수의 수위 변동에 따른 산화, 환원작용에 의한 토층의 교란작용이 관찰된다.

한강하류지형면의 분류와 지형발달에 대한 연구 (양수리에서 능곡까지)

  • 박노식
    • 동굴
    • /
    • 제68호
    • /
    • pp.23-73
    • /
    • 2005
  • Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

섬진강 유역의 하성 퇴적층에 관한 연구 (Fluvial Deposits Distributed along the Seomjin River)

  • 유환수;조석희;고영구
    • 한국지구과학회지
    • /
    • 제21권2호
    • /
    • pp.174-187
    • /
    • 2000
  • 섬진강 하안에는 신생대 제4기의 사질을 주로 하는 조립질 퇴적물이 주로 퇴적되어 있다. 이들 하성 퇴적물의 퇴적학적 특징을 수평적, 수직적으로 조사하였다. 퇴적물의 수평적 분포를 알아보기 위하여 강의 하구에서 상류까지 사질 퇴적물의 시료를 채취하는 한편, 구례 부근의 유역에 분포하는 하성퇴적층의 퇴적단면을 기재하고 퇴적물에 대한 퇴적학적 연구를 수행하여 퇴적환경을 규명하고 그 변화상을 추적하였다. 섬진강 퇴적물의 입도분포는 극조립사(very coarse sand)에서 조립사(coarse sand)에 해당한다. 분급도는 매우 범위가 넓은 다양한 분포를 보이고 있으며 평균적으로 보통 정도의 분급(moderately sorted)으로 나타난다. 퇴적물의 왜도는 강한 양성왜도(very fine skewed)에서 강한 음성왜도(very coarse skewed)에 이르기까지 광역적인 분포를 보인다. 첨도는 극단적으로 편향된(very lepto-kurtic to extremely lepto-kurtic) 상태에 해당한다. 전체적인 퇴적물의 유형은 미량의 역 함유 사, 역질 사 및 사질 역에 해당한다. 섬진강에 퇴적된 사질 퇴적물의 입자 모양은 구형과 판상의 형태를 가지고 있고, 입자의 크기에 따라 변화가 다소 심하게 나타났다. 섬진강에 분포하는 사질퇴적물의 원마도는 불량한 편이었다. 전자 현미경으로 관찰한 입자의 표면 조직은 입자 형태에 따라 변화가 심하였다. 크기가 작은 입자의 경우 표면이 잘 연마되어 있으며 석영 입자는 각상과 아원상까지 여러 형태를 보여준다. 구례 부근에서 강주변의 하성퇴적층의 퇴적 단면을 기재하면서 퇴적상의 변화와 퇴적구조의 특징을 조사하여, 이 지역에서 나타난 퇴적상을 xGyS, mGyS, gGyS, xSM, xS, mS, mGyM, IgM 등 8개 퇴적상으로 구분하였다. 이들 퇴적상들은 2개의 퇴적상조합으로 구분된다. 퇴적상조합 I은 망상 하천의 하도 퇴적물로 추정되며, 상부의 퇴적상조합 II는 하도 주변의 범람원 퇴적물로 추정된다. 하부의 퇴적상조합 I이 상부의 퇴적상조합 II로 변하게 되는 환경 변화는 퇴적상조합 I을 퇴적시켰던 망상 하천의 하도가 이동하여 가면서 그 곳이 하천 주변의 범람원으로 변한 것으로 추정된다.

  • PDF