• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.33-49
• /
• 1997

One of the most important missons that are imposed on merchant ship at sea is to accomplish the safe transportation of cargo loaded. Recently, a study on the seakeeping performance has been carried out on the development of evaluation system related to the synthetic safety of a ship at sea. The seakeeping performance is the ship's ability sailing at, and executing its misson against adverse environmental factors successfully and safely. Until now, however, there has not been any method of quantitative evaluation on the dynamic safety of the ship's cargo loaded. In this regards, this paper has introduced the evaluation method of dynamic safety of the ship's cargo. In order to evaluate the dynamic safety of cargo, the vertical and lateral acceleration which causes the collapse, racking and local structure failure of cargo was adopted as the evaluation factors in the ship's motions. The response amplitude of ship's motions in regular waves is manipulated by NSM (New Strip Method) on a given 2,700 TEU full container vessel under the wind forces of 7, 8 and 9 Beaufort scale. Each response of ship's motions induced by NSM was applied to short-crested irregular waves for stochastic process on evaluation factors and then vertical and lateral acceleration of each cargo was compared with significant amplitude of each acceleration. A representative dangerous factor was determined by comparing permissible values of stacking and racking forces occurred typically to the vertical and transverse directions with the container strength required on ISO 1496 at the positions of forecastle, poop and ship's midship respectively. Through the occurrence probability of the determined factor by Rayleigh's probability density function, the dangerousness which limits loads on container's side wall as an evaluation was applied in judging of the danger of the ship's cargo loaded.

• 한국해안·해양공학회논문집
• /
• 제31권6호
• /
• pp.351-355
• /
• 2019

무공케이슨 방파제의 한계상태설계를 위한 하중저항계수를 제시하였다. 전국 항만의 16개 방파제에 대한 신뢰성해석을 수행하여 부분안전계수를 산출하였으며 이를 하중과 저항계수로 전환하였다. 개별적으로 구한 하중저항계수에 최적화기법을 적용하여 최종 하중저항계수를 보정하였다. 최종적으로 얻은 하중저항계수를 이용하여 방파제를 재설계한 후 목표수준을 만족하는지 검증하였다. 목표신뢰도수준의 변화에 따른 하중저항계수를 제시하여 한계상태설계가 용이하도록 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.309-314
• /
• 2003

A vertical curve should be installed in straight section. In case, it be installed on horizontal curved section, safety factor go down. In this study, it is calculated that the deficiency of cant about vertical curve radius on horizontal curved section. The result of this study will be used on planning the tack layout of railroad and design the track construction.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1221-1228
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to $30\%$ of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis and makes the estimation for safety of vertical roller mill.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 2000

Numerical analysis of slope stability is presented using slice method, static seismic analysis methods, and earthquake response analysis methods. Static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis, Hachinohe-wave is applied. Safety factor calculated using slice method for failure surface. Calculating methods are Bishop's method and Janhu's method. Static seismic analysis was applied using Mhor-Coulomb model and earthquake response analysis was applied using non-linear elastic model.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.35-44
• /
• 2014

This study was to secure the safety of poor appearance distribution concrete poles effectively and to reduce the replacement costs of them by developing a soundness evaluation index. The researcher of this study investigated poor appearance types of concrete pole, collected 53 of test samples, and tested pole strength. As a result of strength test, only 17 percent of poor appearance concrete poles were below 2.0 of safety factor spec. As results of multiple regression analysis, it is verified that surface air void, horizontal crack, net-shaped crack, elapsed year, vertical crack, and deterioration in concrete compressive strength have statistically negative effects on safety factor of concrete poles in a significant level. The researcher set up a soundness evaluation index by using multiple regression equation, and suggested that poor appearance concrete poles should be replaced or reinforced only in case of soundness evaluation score of 150 or above.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.41-42
• /
• 2006

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. In this paper, analysis of coupling term between vertical load and lateral load for install load cell to wheel-set. This result is going to be utilized in formality that verify running safety of tilting vehicles.

• 한국강구조학회 논문집
• /
• 제30권2호
• /
• pp.97-104
• /
• 2018

PHC 파일을 연결하기 위해 수평 및 수직 볼트를 사용한 연결부의 안전성 평가를 유한요소해석을 통하여 수행하였다. 수치해석 모델은 유한요소해석 프로그램인 ABAQUS를 이용하였으며 모든 연결 장치를 3D Solid 모델로 모델링하였다. 볼트 연결부는 ABAQUS에 제시된 Contact 및 Tie 조건에 고려하여 검토하였다. 유한요소해석을 통해 PHC 파일 연결부의 압축, 인장, 휨 및 전단 해석을 수행하였으며, 각 연결 장치에서 발생하는 Von-Mises 응력을 도출하여 볼트연결부의 안전성을 평가하였다.

• 대한토목학회논문집
• /
• 제32권6C호
• /
• pp.239-247
• /
• 2012

연직배수재가 설치된 연약지반 상에 도로성토를 실시할 경우 연약지반에 측방유동이 발생될 지 여부를 예측할 수 있는 방법이 제안되었다. 이 측방유동예측법을 조사하기위해 연직배수공법을 적용하여 지반개량공사가 실시된 연약지반 상에 도로성토가 시공된 우리나라 서해안과 남해안 지역 연약지반에서 계측관리가 실시된 13개 현장 200개 측점의 현장계측자료를 수집 분석하였다. 수평배수재를 설치한 연약지반에서 수평변위와 사면안전율과의 관계를 조사할 경우는 연약지반의 지표면수평변위량 보다는 지중최대수평변위량을 적용하는 것이 바람직하였다. 성토사면의 사면안전율이 1.4 이상이면 대부분의 연약지반 최대수평변위는 50mm 이하로 발생되었고 사면안전율이 1.2 이하이면 대부분의 최대수평변위는 100mm 이상으로 발생되었다. 최대수평변위량이 50mm 이하로 발생하면 전단변형이 발생하지 않았으므로 측방유동이 발생할 우려가 없는 안전한 현장으로 판단된다. 반면에 최대수평변위량이 100mm 이상으로 크게 발생하는 현장에서는 전단파괴가 발생할 가능성이 있다고 판단된다. 이런 현장에서는 즉각 대책을 강구한 후 성토를 계속함이 바람직하다고 판단된다. 또한 연직배수재를 설치한 연약지반에서 안정수가 3.0이하이고 지지안전율이 1.7 이상이면 안전한 성토시공이 가능하며 안정수가 4.3 이상이고 지지안전율이 1.2 이하이면 연약지반에 전단변형의 발생은 물론이고 전단파괴의 가능성까지도 예상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1144-1156
• /
• 2008

In this paper, heaving phenomenon is analyzed by laboratory tests. A laboratory test is consist of building soft clay foundation in plane-strain soil tank, construction of retaining wall, and excavation work. And range of shear strain, and destruction shape about soft clay foundation is compared, and analyzed with results of proposal formula. Using this study, safety factor is suggested for heaving phenomenon in the construction of wall on the soft clay. Actual theory is suggested by this suggested safety factor. There are various proposal formula for heaving phenomenon. For example, Terzaghi & Peck, Tschebotarioff, Bjerrum & Eide(Experience formula) and so on. Terzaghi & Peck's proposal formula is chosen, compared with laboratory test's result and analyzed in this study. A soft clay used in study is assumed homogeneous. A Depth of foundation is enough to observe shear strain by heaving phenomenon. Retaining wall is enough hard not to have vertical displacement.