• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.339-345
• /
• 2016

In general, mosaic blocks are used to hide some specified areas, such as human faces and disgusting objects, in an input image when images are uploaded on a web-site or blog. This paper proposes a new algorithm for robustly detecting grid mosaic areas in an image based on the edge projection. The proposed algorithm first extracts the Canny edges from an input image. The algorithm then detects the candidate mosaic blocks based on horizontal and vertical edge projection. Subsequently, the algorithm obtains real mosaic areas from the candidate areas by eliminating the non-mosaic candidate regions through geometric features, such as size and compactness. The experimental results showed that the suggested algorithm detects mosaic areas in images more accurately than other existing methods. The suggested mosaic detection approach is expected to be utilized usefully in a variety of multimedia-related real application areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4121-4128
• /
• 2010

A probe card is used in testing semiconductor wafers. It must maintain a precise location tolerance for a fine pitch due to highly densified chips. However, high heat transferred from its lower chuck causes thermal deformations of the probe card. Vertical deformation due to the heat will bring contact problems to the pins in the probe card, while horizontal deformation will cause positional inaccuracies. Therefore, probe cards must be designed with proper materials and structures so that the thermal deformations are within allowable tolerances. In this paper, heat transfer analyses under realistic loading conditions are simulated using ANSYS$^{TM}$ finite element analysis program. Thermal deformations are calculated based on steady-state temperature gradients, and an optimal structure of the probe card is proposed by adjusting a set of relevant design parameters so that the deformations are minimized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.742-752
• /
• 2017

The bridge type of steel concrete composite rahmen or pre-flex has been applied where a lower depth girder is required due to vertical clearance restrictions caused by the crossing of rivers and roads. On the other hand, because these types are not only complicated to manufacture and construct, but also expensive, void slab bridges may be an alternative. In this study, prefabricated PSC-I shape girder was used to make a void slab and all procedures for bridge development, such as analysis, design, fabrication, and real-scale test, were included in the scope of research. The results of this study will provide sufficient background data to be applied to the field and the structural safety has been verified through experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.401-408
• /
• 2019

This study numerically examined the maximum wind pressure distribution of a billboard on the roof of a middle-rise building. The deformation caused by the maximum wind pressure was examined. For the numerical analysis, the signboard was assumed to be installed on $(b)20m{\times}(d)10m{\times}(h)$ buildings. The maximum wind pressure was measured using four models with the standard model and different sizes of the signboard. The numerical analysis showed that the horizontal deformation predominantly occurs as the shape of the signboard becomes closer to a rectangle, and high wind pressure and deformation occur at the corners of both ends. As the height of the signboard increases, vertical deformation predominantly occurs, and static pressure forms on the backside. When the height is lower than the width of the signboard, the wind pressure is concentrated on the center of the roof. Therefore, the distribution of the maximum wind pressure is stable, and the effect of the wind pressure is relatively low as the height-to-width ratio approaches 1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.66-72
• /
• 2019

To improve ride quality and running stability of high speed train(HST), it is important that connection between coaches adopts the articulated bogies by using a gangway ring, unlike the conventional independent bogies assembled with car bodies. Although the gangway ring should be ensured absolute safety against passenger movement between coaches during train operation, there is still a lack of quantitative durability criteria of that. Therefore, in order to improve the passenger safety of HST, it is important to study the test requirements on durability evaluation for the ring. In this study, seven mixed loading cases were derived from the triaxial loading(vertical/lateral/longitudinal) modes. The safety factor of each component is at least 2.4 or more from the results of the finite element analysis. In addition, fatigue safety was evaluated through durability analysis from the viewpoint of strain-life design. Durability tests for the gangway ring carried out a total of 10 million cycles in 4 phases load conditions. After the durability test, the defect of each component was investigated using nondestructive testing techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.553-561
• /
• 2021

The purposes of this study are to propose evacuation recommendations through evacuation model considering occupancy load model in child care center with disabilities. To achieve these purposes, the survey on the occupancy load and egress model and evacuation experiments have carried out, and evacuation occupancy load model for child care center with disabilities are suggested. The results of this study are as follows : (1) The evacuation plan for children with disabilities are necessary special considerations according the type and levels of disability, and various egress means and method for children in child care center with disabilities conditions. (2) The evacuation occupancy loads are different with non-impaired children and evacuation occupancy loads and evacuation corridors width are necessary considering impaired children's evacuation behaviors. (3) The temporal evacuation area(refuge area) is essential for children with disability who are impossible vertical evacuation such as impaired children using wheelchair and cerebral palsy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.338-344
• /
• 2021

In this study, an actual test procedure was considered for the effective operation of a bulletproof test. The problems of the existing system were drawn in two ways. First, it is difficult to mount items of various shapes. Second, various test standards cannot be applied. To improve these problems, an automated and standardized mounting system was designed/applied to mount various items. The multi-purpose mount was compatible with the backing support for body armor testing. The sample holding frame was located inside and was designed to mount samples of various sizes and shapes through vertical movement and fixation without a separate detachment/attachment process. A comparison of the economics before and after the introduction of the item mounting system confirmed the effectiveness of the system by the increased number of daily tests and equipment utilization and reduced hourly cost.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.73-84
• /
• 2016

The purpose of this study is to examine the global value chain of the global automotive industry to investigate the success factors through the example of the value chain of Hyundai Motor. It looks at the value chain of the well-known Korean automaker, Hyundai Motor, to find success factors with cases. It examines the process to build the supply chain of Hyundai Motor to analyze what impact it has on the growth of Hyundai Motor to look closely at the vertical division of labor of vehicle parts manufacturers. Korea's automobile industry has been expanding cooperation between two sectors as a multifunctional promotion focusing on electronic communications technology in machinery and technology center. Through introducing the nation's first vertical integration in the sector, Hyundai Motor has secured competitiveness of cost reduction and prestige car production. Hyundai Motor has operated and established factories in the United States, India, Turkey, the Czech Republic, Russia, and Brazil. Hyundai Motor operates 51 affiliates, such as Hyundai Mobis, by restructuring, mergers and acquisitions, and building their own vertical division of labor around it. Hyundai Motor has been overcoming dependence on foreign modules businesses and maintaining the supply value chain around Hyundai Mobis.

• Proceedings of the CALSEC Conference
• /
• 1998.10a
• /
• pp.27-43
• /
• 1998

Recently, most corporations in Korea need to construct new management system for overcoming economic crisis. Firstly, this paper suggests “Value Creation system”. Secondly, this paper suggests CALS as strategic substitute to achieve market efficiency, capital efficiency, personal efficiency, and operation efficiency, which are four critical factors of “Value Creation system”. Korean corporations should build new business model founded on cooperation by completing CALS system and reconstruct competitive management system by using knowledge and know-how accumulated in that process. Because most corporations keep exclusive corporate culture and little experience of cooperative relationship among businesses, strategic approaches are essential for construction of CALS. These are vertical integration, organization of CALS construction teams, concurrent development of product/process, CEO's iron will, Precise vision and strategies, and education/training of participant.

• Atmosphere
• /
• v.14 no.1
• /
• pp.4-23
• /
• 2004

To monitor the world's oceans and understand the role of the oceans for climate change, an Array for Real-time Geostrophic Oceanography (ARGO) program has been carried out since year 2000. Autonomous profiling floats of about 820 are reporting the vertical temperature, salinity, and pressure profiles of the upper 2000 m underwater at regular time intervals. Meteorological Research Institute (METRI) of Korea Meteorological Administration (KMA) launched 45 floats at the East Sea and the western Pacific to understand characteristics of water properties and develop the global ocean observation system as a part of international cooperation project. In this study, we introduce ARGO program, METRI-ARGO and the features of APEX float itself and their data formats. We also describe the significant points to be considered for using ARGO data.