• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• The korean journal of orthodontics
• /
• v.43 no.4
• /
• pp.168-177
• /
• 2013

Objective: In this study, we aimed to examine the relationship between chin deviation and the positional and morphological features of the mandible and to determine the factors that contributed to chin deviation in individuals with a unilateral cleft lip and palate (UCLP). Methods: Cone-beam computed tomography (CBCT) images of 28 adults with UCLP were analyzed in this study. Segmented three-dimensional temporomandibular fossa and mandible images were reconstructed, and angular, linear, and volumetric parameters were measured. Results: For all 28 individuals, the chin was found to deviate to the cleft side by 1.59 mm. Moreover, among these 28 individuals, only 7 showed distinct (more than 4 mm) chin deviation, which was toward the cleft side. Compared to the non-cleft side, the mandibular body length, frontal ramal inclination, and vertical position of the condyle were lower and inclination of the temporomandibular fossa was steeper on the cleft side. Furthermore, the differences in inclination of the temporomandibular fossa, mandibular body length, ramus length, and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. Conclusions: UCLP individuals show mild chin deviation to the cleft side. Statistical differences were noted in the parameters that represented positional and morphological asymmetries of the mandible and temporomandibular fossa; however, these differences were too small to indicate clinical significance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.841-848
• /
• 2020

The 1.29 GHz wind profiler radar is a remote observation device that is useful not only for calculating wind vectors in clear air, but also for detecting rainfall. The Doppler spectrum symmetry test is essential in the horizontal wind treatment process. Since asymmetry may be detected in rainfall cases, it is necessary to reflect in the wind calculation algorithm that the sign of the radial velocity is the same according to the magnitude of the vertical velocity. In the summer of 2017 (June, July), a wind vector calculation algorithm by Bragg scattering and Rayleigh scattering was developed using Changwon wind profiler data, and verified by comparing it with radiosonde data at 6 hour intervals.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.606-612
• /
• 2000

This study was performed to investigate the average anthropometric value of normal Korean men and women and to compare the preceding literatures. Additionally, average Korean profilogram was made to serve as a template for diagnosis of facial form. Eighty five Korean subjects(41 men, 44 women) aged between 21 to 26 were selected by members of the author's department on the basis of intact dentition and Class I occlusion without facial asymmetry. Frontal and lateral photographs were taken under standardized condition with digital camera. The image was magnified and adjusted according to the FH plane of cephalometric radiographs and digitized using personal computer. To compare the Western beauty, 25 esthetically pleasing female was selected to measure various angle and distance of the face. 1. It was possible to calculate the mean coordinate value of Korean normal samples which enables the direct visualization and comparison with the use of template. The method in this study was easy to applicate under the Microsoft $Windows^{(R)}$ bases. 2. Maxillary vertical hypoplasia, upper and lower lip protrusion was characteristics of Korean norms and relatively narrow alar base distance, less conspicuous nasal projection was observed. As the vermilion exposure and upper lip length was more than western norm, chin looks shorter than western. To compare the Korean and Western esthetically pleasing profile, facial convexity and nose was less conspicuous in Korean women.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.31-38
• /
• 1991

Suspended sediment budget in Gwangyang Bay was investigated using the data of suspended sediment concentration and vertical distribution of tidal currents at the mouth of the bay in the Yeosu Sound (Yeosu Haeman) . At the mouth of the bay suspended sediment concentration shows much higher value of approximately 17.80mg/l on the average near the bottom than the concentration near the surface where the average is 4.7mg/l. Tidal currents also show an asymmetry in magnitude between flood and ebb. Near the surface ebb is stronger than flood, while flood is stronger than ebb near the bottom. Due to the higher concentration and stronger flood current near the bottom, transport of suspended sediment near the bottom plays a major role to the sediment budget in the bay, and the bay is in net-depositional environment. The western part of the bay seems to gain the suspended sediment of approximately $5.66\times10^8g/day$, which corresponds to a sedimentation rate of about 1.15m/1,000years.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.1-13
• /
• 1997

Preoperative and postoperative TMJ symptoms were observed in mandibular prognathism of 30 patients operated on by Le Fort I osteotomy and intraoral vertical ramus osteotomy. The alterations of TMJ symptoms were investigated and the relationship between changes of TMJ symptoms and some cephalometric values including occlusal plane angle, mandibular plane angle, posteior ramal height and a degree of deviation of mandibular incisor midline to facial midline were observed. The results are as follows. The incidence of patient with TMJ symptoms before orthognathic surgery was 40% and after orthognathic surgery was 20%. The most frequetly encountered symptoms in orthognathic TMJ dysfunction patients were TMJ pain and/or clicking. After surgery 66% of the preoperative symptomatic patients reported improvement TMJ symptoms. On the orther hand 2 patient (6%) of the preoperative asymptomatic patients developed TMJ symptoms after surgery. Preoperatively, 60% of the facial asymmetric patients with mandibular prognathism had TMJ symptomas. The more severe facial asymmetry was, the higher incidence of TMJ symptoms was. The alteration of occlusal plane angle and mandibular plane angle seems to be one of the contributing factors which make to change TMJ symptoms in orthognathic patients. But its amount seems to be low significance. Increase or decrease of posterior ramal height have influence on the change of TMJ symptoms.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.2
• /
• pp.19-27
• /
• 1989

Hemifacial microsomia is characterized underdevelopment of the TMJ, mandibular ramus, and associated muscles of mastication. The Maxilla and malar bones on the affected side frequently are underdeveloped. The contiguous parotid gland may be hypoplastic. Preauricular sinus tracts and tags may exist, along with underdevelopment of the associated external ear, and affected facial nerve and muscles of facial expression may also show dysfunction. Children exhibiting the more classic signs will be identified at birth. Little is known about the etiology of hemifacial microsomia. We have corrected surgically a 22-year-old woman with hemifacial microsomia. We have performed leveling Le Fort I osteotomy with iliac bone graft on the maxilla, reverse-L osteotomy and iliac bone graft on the right mandibular ramus, vertical ramus osteotomy on the left side, onlay bone graft on the right mandibular body, and augmentation genioplasty. The postoperative course was uneventful and restoration of facial asymmetry was achieved.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.637-645
• /
• 1996

In non-growing Class III malocclusion, the critical aspects which determine the need of orthognatic surgery are the severity of skeletal discrepancy, incisor inclination, overbile and soft tissue profile. Two-jaw surgery is more effective in correcting severe sagittal, vertical, transverse skeletal discrepancies and facial asymmetry. And more esthetic and stable profile can be achieved by two-jaw surgery Some midfacial deficiency Patients can be treated by Pyramidal Le Fort II osteotomy to maintain infraorbital rim and malar complex and to advance nasomaxillary complex. Others who require advancement of infraorbital rim and malar complex can be treated by quadrangular Le Fort II osteotomy. On the following cases, patients who had represented midfacial deficiency and mandibular prognathism were treated with combined orthodontic-surgical therapy by Le Fort II osteotomy and BSSRO.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.729-737
• /
• 2014

A study has been carried out that effectively controls the vibration of asymmetric cable-stayed bridges caused by earthquakes with MR dampers. In order to enhance the practical serviceability of MR dampers, an asymmetric cable-stayed bridge structure has been designed and produced, and a MR damper has been produced so as to have this bridge structure controlled appropriately. An experiment that controls vertical and horizontal vibrations has been carried out by exciting the asymmetric cable-stayed bridge in the horizontal direction with the El-centro seismic wave. The control performance of the MR damper has been evaluated under the five control conditions in the experiments of vibration control in each direction. As a result of the experiment, MR dampers were proved to control vibrations more effectively when either Lyapunov control algorithm or Clipped-optimal control algorithm was used to control vibrations of the asymmetric cable-stayed bridge caused by earthquakes. In addition, different controlling effects were found in vibration controls in vertical and horizontal directions due to the asymmetry of the structure and the horizontal excitation. With such controlling effects, semi-active MR dampers are evaluated to effectively control vibrations caused by earthquakes in flexible and asymmetric structures such as asymmetric cable-stayed bridges.