• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.447-457
• /
• 2004

This paper proposes a RSA crypto-processor for embedded systems. The architecture of the RSA crypto-processor should be used relying on Big Montgomery algorithm, and is supported by configurable bit size. The RSA crypto-processor includes a RSA control signal generator, an optimal Big Montgomery processor(adder, multiplier). We use diverse arithmetic unit (adder, multiplier) algorithm. After we compared the various results, we selected the optimal arithmetic unit which can be connected with ARM core-processor. The RSA crypto-processor was implemented with Verilog HDL with top-down methodology, and it was verified by C language and Cadence Verilog-XL. The verified models were synthesized with a Hynix 0.25${\mu}{\textrm}{m}$, CMOS standard cell library while using Synopsys Design Compiler. The RSA crypto-processor can operate at a clock speed of 51 MHz in this worst case conditions of 2.7V, 10$0^{\circ}C$ and has about 36,639 gates.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.153-161
• /
• 2011

In this work, we report the physics-based SPICE model of amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) and demonstrate the SPICE simulation of amorphous InGaZnO (a-IGZO) TFT inverter by using Verilog-A. As key physical parameter, subgap density-of-states (DOS) is extracted and used for calculating the electric potential, carrier density, and mobility along the depth direction of active thin-film. It is confirmed that the proposed DOS-based SPICE model can successfully reproduce the voltage transfer characteristic of a-IGZO inverter as well as the measured I-V characteristics of a-IGZO TFTs within the average error of 6% at $V_{DD}$=20 V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11B
• /
• pp.1957-1965
• /
• 2000

본 논문에서는 휴대 멀티미디어 응용을 위한 MDSP(Multimedia Fixed Point DSP) 칩의 내장 메모리 테스트와 기판 수준의 테스트를 지원하기 위해 내장 메모리 테스트를 위한 자체 테스트 기법, 기판 수준의 테스트 지원 및 내장 메모리를 위한 자체 테스트 회로를 제어하기 위한 경계 주사 기법을 구현하였다. 본 논문에서 구현한 기법들은 Verilog HDL을 이용하여 회로들을 설계하였으며, Synopsys 툴과 현대 heb60 라이브러리를 이용하여 합성하였다. 그리고 회로 검증을 위한 시뮬레이터는 Cadence사의 VerilogXL을 사용하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.275-275
• /
• 2000

This paper designs a digital correlator for the integrated GPS/GLONASS receiver consisting of DCO, carrier cycle counter, code generator, code phase counter, mixer, epoch counter, accumulator. It is designed using Verilog-HDL(Verilog-Hardware Description Language) and synthesized using EDA(Electronic Design Automation) tools. The performance of the designed digital correlator is verified by the functional simulation and real satellite tracking experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.875-877
• /
• 2011

This paper introduces a touch screen panel driver using modified charge pump circuit. The touch screen panel driver is composed of an analog circuit part which senses a touch and a digital circuit which analyse the sensed signal. To verify the functions the touch screen panel driver, a mixed-mode circuit was built and simulated using Cadence Spectre. The digital circuits were modeled with Verilog-A in order to interface with the analog circuits and verify the functionalities of the driver with less simulation time. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver which does not include an ADC.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.26-32
• /
• 2024

Recently, various video resolution formats have emerged, and digital devices have built in dedicated scaler chips to support them by enlarging or reducing the resolution of input videos. Therefore, the performance and hardware size of scaler chips are important. In this paper, the combinatorial interpolation scaler algorithm proposed by Han is used to design the hardware using the line memory structure with dual-clock proposed by Han and Jung. The proposed hardware is capable of real-time processing in QHD environments, designed using Verilog, and validated using Xilinx's Vivado 2023.1. We also verify the performance of Han's proposed algorithm with a quantitative numerical evaluation of the proposed hardware.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.502-506
• /
• 2020

With the development of autonomous driving technology, the importance of object recognition technology is increasing. Haze removal is required because the hazy weather reduces visibility and detectability in object recognition. However, the image from which the haze has been removed cannot properly reflect the unique color, and a detection error occurs. In this paper, we use CIE1931 color coordinate system to extend or reduce the color area to provide algorithms and hardware that reflect the colors of the real world. In addition, we will implement hardware capable of real-time processing in a 4K environment as the image media develops. This hardware was written in Verilog and implemented on the SoC verification board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.319-324
• /
• 2012

This paper introduces a 2-dimensional touch screen panel driver based on an improved capacitive sensing circuit. The improved capacitive sensing circuit based on charge pump can eliminate the remaining charges of the intermediate nodes, which may cause output voltage drift. The touch screen panel driver with mixed-mode circuits was built and simulated using Cadence Spectre. Verilog-A models the digital circuits effectively and enables them to interface with analog circuits easily. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver based on the improved capacitive sensing circuit offering no voltage drift.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.243-247
• /
• 2020

As the autonomous driving market is rapidly growing, research on autonomous driving is being conducted. Self-driving functions should be performed regardless of the weather for the driver's safety. However, misty weather is difficult to autonomous driving because of the lack of visibility, so a defog algorithm should be used. The image obtained through the fog removal algorithm causes the image quality to deteriorate. To improve this problem, HSV color correction is used to increase the sharpness. In this paper, we propose a color correction hardware using HSV that can cope with 4K images. The hardware was designed with Verilog and verified by Modelsim. In addition, the FPGA was implemented with the goal of Xilinx's xc7z045-2ffg900.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.10-14
• /
• 2021

This paper presents a hardware that improves the complexity of the CIE1931 color coordinate algorithm operation. The conventional algorithm has disadvantage of growing hardware due to 4-Split Multiply operations used to calculate large bits in the computation process. But the proposed algorithm pre-calculates the defined R2X, X2R Matrix operations of the conventional algorithm and makes them a matrix. By applying the matrix to the images and improving the color, it is possible to reduce the amount of computation and hardware size. By comparing the results of Xilinx synthesis of hardware designed with Verilog, we can check the performance for real-time processing in 4K environments with reduced hardware resources. Furthermore, this paper validates the hardware mount behavior by presenting the execution results of the FPGA board.