• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.34-39
• /
• 2016

Structural behaviour of PSC box bridge, on which KTX train runs, is analysed up to 500 km/h speed considering 12 stages track irregularity and interaction between bridge and vehicle. To evaluate wheel forces and rotations of vehicle, lateral wheel forces, derail factor and offload factor calculated on the track combining the bridge and 170 m normal track are compared with existing allowed limits. Maximum longitudinal displacement and accumulated sliding distance of the brige bearings for simply supported and 2 span continuous PSC bridges are presented by each running speeds. Long-term friction tests based on EN-1337-2 are conducted between PTFE and DP-mate plates. Finally, the long-term friction tests are proposed to consider the increasing speed of next generation high-speed train.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.279-288
• /
• 2021

In the era of the 4th industrial revolution, smart construction, in which new technologies such as UAV (Unmanned Aerial Vehicle) are fused, is attracting attention in the construction field. However, the method of estimating earthwork volume using DEM generated by UAV survey according to practical regulations such as construction design guidelines or standard product counting is not officially recognized and needs to be improved. In this study, different types of UAV were measured and DEM was obtained using this data. The DEM (Digital Elevation Model) thus obtained was analyzed for changes in the amount of earthworks according to the size of the GSD (Ground Sample Distance). In addition, the amount of earthwork by DEM and the amount of earthwork by existing design drawings were compared and analyzed. As a result of the study, it was suggested that images with a GSD of 5cm or less are effective to generate a high-quality DEM. Next, as a result of comparing the earthwork volume calculation method using DEM and the earthwork volume based on the existing 2D design drawings, a difference of about 1% was shown. In addition, when the design earthwork amount calculated by the double-section averaging method was compared with the designed earthwork amount using DEM data by UAV survey, a difference of about 1% was found. Therefore, it is suggested that the method of calculating the amount of earthworks using UAV is an efficient method that can replace the existing method.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.125-131
• /
• 2019

A vanishing point is a point on an image to which parallel lines projected from a real space gather. A vanishing point in a road space provides important spatial information. It is possible to improve the position of an extracted lane or generate a depth map image using a vanishing point in the road space. In this paper, we propose a method of detecting vanishing points on images taken from a vehicle's point of view using Deep Neural Network (DNN) and Histogram of Oriented Gradient (HoG). The proposed algorithm is divided into a HoG feature extraction step, in which the edge direction is extracted by dividing an image into blocks, a DNN learning step, and a test step. In the learning stage, learning is performed using 2,300 road images taken from a vehicle's point of views. In the test phase, the efficiency of the proposed algorithm using the Normalized Euclidean Distance (NormDist) method is measured.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.25-32
• /
• 2018

Due to the rapid increase in the number of vehicles, the physical and human losses caused by traffic accidents have become serious social problems. In the global trend, there have been active studies conducted on improving safety level of automobile in order to reduce the number of automobile accident. As a result of such research, traffic accidents continue to decline. In the case of South Korea, however, rate of death by automobile accident is 8.5 per 10,000 people and it is a seven rank among the countries in OECD (Organization for Economic Cooperation and Development). This average rate is almost double compared to average automobile accident rate per 10,000 vehicles, of other OECD countries in 2015. Consequently, many studies and policies currently have been conducted and made for increasing safety of pedestrians; however, they are only emphasizing characteristics of pedestrians and drivers. For this reason, this study suggests scenarios for establishment of test standard corresponding with domestic environment and international standard of AEB (Autonomous Emergency Braking) and conducts a real car test by scenarios by setting up a goal with a function for remaining distance after braking and then examine equation by comparing real car tests results and outcome after calculation. This is a theoretical method to predict a relative remaining distance after AEB prior to conducting a real car test for evaluation of safeness of automobile with AEB and it is expected that it solves problem of complication of real car test.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2018

In South Korea, Jeju Island has a role as a test bed for electric vehicles (EVs). All conventional cars on the island are supposed to be replaced with EVs by 2030. Accordingly, how to effectively set up EV charging stations (EVCSs) that can charge EVs is an urgent research issue. In this paper, we present a case study on planning the locations of EVCS for Jeju Island, South Korea. The objective is to determine where EVCSs to be installed so as to balance the load of EVCSs while satisfying demands. For a public service with EVCSs by some government or non-profit organization, load balancing between EVCS locations may be one of major measures to evaluate or publicize the associated service network. Nevertheless, this measure has not been receiving much attention in the related literature. Thus, we consider the measure as a constraint and an objective in a mixed integer programming model. The model also considers the maximum allowed distance that drivers would detour to recharge their EV instead of using the shortest path to their destination. To solve the problem effectively, we develop a heuristic algorithm. With the proposed heuristic algorithm, a variety of numerical analysis is conducted to identify effects of the maximum allowed detour distance and the tightness of budget for installing EVCSs. From the analysis, we discuss the effects and draw practical implications.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.35-41
• /
• 2021

In this study, improved path tracking control algorithm based on pure pursuit algorithm is newly proposed by using improved lane detection algorithm through real time post-processing with interpolation methodology. Since the original pure pursuit works well only at speeds below 20 km/h, the look-ahead distance is implemented as a sigmoid function to work well at an average speed of 45 km/h to improve tracking performance. In addition, a smoothing filter was added to reduce the steering angle vibration of the original algorithm, and the stability of the steering angle was improved. The post-processing algorithm presented has implemented more robust lane recognition system using real-time pre/post processing method with deep learning and estimated interpolation. Real time processing is more cost-effective than the method using lots of computing resources and building abundant datasets for improving the performance of deep learning networks. Therefore, this paper also presents improved lane detection performance by using the final results with naive computer vision codes and pre/post processing. Firstly, the pre-processing was newly designed for real-time processing and robust recognition performance of augmentation. Secondly, the post-processing was designed to detect lanes by receiving the segmentation results based on the estimated interpolation in consideration of the properties of the continuous lanes. Consequently, experimental results by utilizing driving guidance line information from processing parts show that the improved lane detection algorithm is effective to minimize the lateral offset error in the diverse maneuvering roads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.146-159
• /
• 2021

vehicle simulator as part of an empirical analysis the driving characteristics of elderly drivers. To this end, the driving characteristics of the elderly driver from previous study review. he driving characteristics of the elderly the driving elderly driver and general driverIn summarizing these experimental results, the -test showed different driving characteristics from general drivers in all items except for one side of the lane, such as driving speed and driving operation (brake, throttle, steering operation) at a significance level of 95%. Second, when changing lanes, it was difficult for elderly driver to maintain speed and secure an appropriate distance between carslderly driver changed lanes even in inappropriate situations (short distances between cars). Third, in unexpected situation, elderly drivers needed more distance and time.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.471-478
• /
• 2022

In roadside workplaces, more attention should be paid to the safety of workers. The roadside workers underestimate the effect of the brightness of their clothes and judge that drivers will recognize them easily, and the drivers misjudge that the roadside workers are far away and that the vehicle can be stopped in sufficient time. Therefore, customized safety education reflecting this and wearing work clothes with certified visibility functions are required. In Korea, it is not compulsory for roadside workers and vehicle guide attendants to wear work clothes with a visibility function. In this study, the distance ahead perceived by drivers was measured using manikins wearing certified and non-certified reflective safety vests. The perception distance of the non-certified reflective safety vest was 1.4 times longer than that of the certified reflective safety vest, thus confirming the importance of wearing a certified reflective safety vest. To prevent roadside workers from suffering traffic accidents, we propose the enactment of a law that makes it mandatory for them to wear high-visibility safety clothing. Specifically, Article 32 of the Enforcement Regulation of the Road Traffic Act should include high-visibility safety clothing in life protection equipment, and additionally, to prevent secondary accidents, we propose the enactment of a law requiring the installation and wearing of certified reflective safety vests in vehicles.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.121-133
• /
• 2008

Conventional car following models are controlled when the velocity of following vehicle is equal to preceding vehicle without consideration of relative distance. Also, since the car following models are hardly consider the driver's behaviors and the environmental factors in driving, the models can't be adopted in reality. Hence, we developed the car following model applying Human Factors to consider driver's safety and comfortness. We simulated to compare the suggested model with the existing model, GGM(General GM). As results of simulations, the GGM model followed the preceding vehicle when the velocity of following vehicle was equal to preceding vehicle without relation of relative range. The other side, when the relative range was less or over than safety range, the suggested model made the relative range equal to safety range. Accordingly, we could be sure that the model would decrease the driver's discomfort and intensify the safety on driving without unnecessary waste of road. We identified that the suggested model is more realistic than the conventional GGM model.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.57-78
• /
• 2005

The vehicle routing problem (VRP) is to determine a set of feasible vehicle routes, one for each vehicle, such that each customer is visited exactly once and the total distance travelled by the vehicles is minimized. A feasible route is defined as a simple circuit including the depot such that the total demand of the customers in the route does not exceed the vehicle capacity. While there have been significant advances recently in exact solution methodology, the VRP is not a well solved problem. We find most approaches still relying on the branch and bound method. These approaches employ various methodologies to compute a lower bound on the optimal value. We introduce a new modelling approach, termed route-splitting, for the VRP that allows us to address problems whose size is beyond the current computational range of set-partitioning models. The route-splitting model splits each vehicle route into segments, and results in more tractable subproblems. Lifting much of the burden of solving combinatorially hard subproblems, the route-splitting approach puts more weight on the LP master problem, Recent breakthroughs in solving LP problems (Nemhauser, 1994) bode well for our approach. Lower bounds are computed on five symmetric VRPs with up to 199 customers, and eight asymmetric VRPs with up to 70 customers. while it is said that the exact methods developed for asymmetric instances have in general a poor performance when applied to symmetric ones (Toth and Vigo, 2002), the route splitting approach shows a competent performance of 93.5% on average in the symmetric VRPs. For the asymmetric ones, the approach comes up with lower bounds of 97.6% on average. The route-splitting model can deal with asymmetric cost matrices and non-identical vehicles. Given the ability of the route-splitting model to address a wider range of applications and its good performance on asymmetric instances, we find the model promising and valuable for further research.