• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.94-98
• /
• 2013

Transfer Path Analysis (TPA) is commonly used, by car makers and parts suppliers, analysis process to root the cause of NVH problems. In general, TPA is an analyzing technique to find the contributing factors of noise/vibration problems, and their transfer path in vehicle. However, not only TPA is used to analyze the source of NVH problems but also is used to predict NVH performance prior to the proto vehicle, or to set the development target for next new vehicle. Automotive parts manufacturing companies have to set NVH performance target when developing new systems just as car makers have NVH target set for new vehicle. Nevertheless, most of components are currently being developed based on subjective evaluation without an objective target. To judge the suitability of using TPA to set NVH target of electric parking brake, this research analyzed the transfer path by setting them in two points of view; Chassis Module and Electric Parking Brake, and comparing the measured value and calculated value. From this result, NVH target of electric parking brake will be approached in level of vehicle, system and component.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.45-54
• /
• 2011

A vehicle suspension system performs two functions, the ride quality and the stability, which conflict with each other. Among the various suspension systems, an active suspension system has an external energy source, from which energy is always supplied to the system for continuous control of vehicle motion. In the process of the linearization for the nonlinear active suspension system, the frequency dependent damping method is used for the exact modelling to the real model. The pressure control valve which is controlled by proportional solenoid is the most important component in the active suspension system. The pressure control valve has the dynamic characteristics with 1st order delay. Therefore, It's necessary to adopt the lead compensator to compensate the dynamics of the pressure control valve. The sampling time is also important factor for the control performances. The sampling time value is proposed to satisfy the system performances. After the modelling and simulation for the pressure control valve and vehicle dynamic, the performances of the vehicle ride quality and the stability are enhanced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.937-943
• /
• 2013

An independently driven electric corner module cannot be applied to an actual vehicle without some difficulty, because of vehicle safety problems in the case of malfunctions and degraded ride and handling performance owing to the increase in the unsprung mass. In this study, a simulator is developed to evaluate the vehicle driving performance in order to solve ride and handling problems. Component modeling of a small-sized electric vehicle with an independently driven electric corner module is performed using MATLAB/Simulink. The vehicle is modeled by using CarSim, which can be used to analyze the vehicle maneuvers with 27 DOFs. The control algorithm for the improvement of vehicle driving safety and ride and handling performance is validated by using the developed simulator.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2011

Recent advancement in traffic surveillance systems has allowed the researchers to obtain more detailed vehicular movement such as individual vehicle trajectory data. Understanding the characteristics of interactions between leading and following vehicles in the traffic flow stream is a backbone for designing and evaluating more sophisticated traffic and vehicle control strategies. This study proposes a methodology for estimating rear-end crash potential, as a probabilistic measure, in real-time based on the analysis of vehicular movements. The methodology presented in this study consists of three components. The first predicts vehicle position and speed every second using a Kalman filtering technique. The second estimates the probability for the vehicle's trajectory to belong to either 'changing lane' or 'going straight'. A binary logistic regression (BLR) is used to model the lane-changing decision of the subject vehicle. The other component calculates crash probability by employing an exponential decay function that uses time-to-collision (TTC) between the subject vehicle and the front vehicle. The result of this study is expected to be adapted in developing traffic control and information systems, in particular, for crash prevention.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.167-175
• /
• 2010

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at the individual vehicle or platoon level through vehicle to vehicle (V2V) and vehicle to infrastructure (V2I) communication. It is necessary to develop a traffic flow management scheme to take advantage of the ubiquitous transportation system environments. This paper proposes an algorithm to advise the optimal speed for each vehicle according to the traffic flow condition. The algorithm aims to stabilize the traffic flow by advising the equilibrium speed to the vehicles speeding or crawling under freely flowing condition. And it aims to prevent or at least alleviate the shockwave propagation by advising the optimal speed that should dampen the speed drop under critical flow conditions. This paper builds a simulation testbed and performs some simulation experiments for the proposed algorithm. The proposed algorithm shows the expected results in terms of travel time reduction and congestion alleviation.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.73-81
• /
• 2007

This paper presents how to recognize the new-type vehicle license plate using multi-link recognizer after extract the features from characters. In order to assist this task, this paper proposed FE-MCBP to recognize each character that got through image preprocess, extract range of vehicle license plate and extract process of each character. FE-MCBP is the recognizer based on the features of the character, The recognizer is employed to identify the new-type vehicle licence plates which have both the hangul and the arabic numeral characters. And its recognition rate is improved 9.7 percent than the back propagation recognizer before. Also it makes use of extract of linear component and region coordinate generation technology to normalize a image of the tilted vehicle license plate. The recognition system of the new-type vehicle license plate make possible recognize a image of the tilted vehicle license plate when using this system. Also, this system can recognize the tilted or imperfect vehicle licence plates.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.163-170
• /
• 2001

In this paper, a massless link model transmitting external forces is developed to achieve the numerical efficiency in simulation of vehicle suspension systems. Forces acting on links are resolved and transmitted to attached points with a quasi-static assumption. Also, a theoretical derivation and computer implementation of a massless link with bushing elements are proposed. In the massless link with bushing elements, one end is connected to the adjacent body with bushings and the other end is connected with a spherical joint. The deformation of a massless link with bushing elements is theoretically determined by minimizing the potential energy function with quasi-static equilibrium assumption at each time step. Several simulations with a full vehicle model are carried out to compare the efficiency of the developed massless link component. From the results, it is concluded that the proposed approach can reduce the computational time considerably.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.484-486
• /
• 2004

In this paper, the power electronics requirement and the controls of an induction motor for fuel cell electric vehicle system are presented. The power topology is selected based on performance, cost, size, volume, manufacturability, component count and simplicity. Another highlight of the topology is the reduction of battery bank and its control strategy. The proposed approach consists a full-bridge DC/DC converter to boost the fuel cell voltage. The induction motor operated with vector control is driven by a three-phase PWM inverter supplied by the DC-link voltage. The investigation of the electric vehicle performed due to parameter variation of the induction motor has been presented.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.106-113
• /
• 1997

While driving, the low frequency interior noise below 200Hz causes the main component that irritates the auditory acoustic sense. But these passive control methods bring out increment in cost and weight of the vehicle and result in low efficiency. Recently, various ANC(Active Noise Control) methos to suppress the low frequency noise began to launch into application. In this study, we implemented the active noise control system for passenger vehicle to cancel the engine booming noise using DSP-based control unit, 4 micorphones, and 2 speakers. We used MEFX-LMS (Multiple Error Filtered X-Least Mean Square) algorithm since it can be easily implemented in real time. Also, MEFX-RLS algorithm was taken to enhance the suppression of the harmonic components of the engine booming noise inspite of its computational complexity. The performance of two adaptive algorithms were analyzed with experimental resutls.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.372-376
• /
• 2004

In this paper, the standard test methods at low temperature of rubber suspension components of railway vehicle are investigated and reviewed. In order to connect the TKR(Trans-Korean Railway)-TSR(Trans-Siberian Railway), it is necessary to evaluate the performance of rubber suspenion components of railway vehicle. In the current Korean Standard, the test method at low temperature of railway vehilce components and the test method of rubber bellows of air spring are specified. But, the specified test temperature is higher than the the operating temperature of TSR railway. So, the in-depth research for the test method and performance evaluation technique of rubber suspension component at low temperature is necessary and current KS code should be adjusted.