• Journal of Ginseng Research
• /
• v.7 no.2
• /
• pp.169-171
• /
• 1983

The structural components of cell wall in various parts of Korean ginseng were analysed. Pectin was abundant in the cortex and epidermis of root, and leaf. Hemicellulose in root was more than in other parts of ginseng. Cellulose content of stem and seed coat was much higher compared to other parts and lignin content was highest in seed coat.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.368-368
• /
• 2006

Micro-molded parts can be defined as parts with microgram weight, parts with micro-structured surface, and parts with micro-precision. In this study, various micro-scale molded parts for various polymers were produced by using a precision micro-molding machine. Molded parts with nano-structure surface were also produced to analyze the effect of molding conditions on replication of surface pattern and higher-order structure development of molded parts. Replication of molded parts was influenced by material properties, molding conditions and size of surface pattern. Higher-order structure of molded parts was investigated by using polarized microscope. Skin-shear-core regions inside the molded parts were observed and shear region affected to surface replication.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.213-219
• /
• 2003

This paper proposes an efficient and effective BOM management scheme for small and medium manufacturing (SME) companies that produce automobile parts. Automobile part's manufacturers produce very various products due to various automobile characteristics such as types, colors, and options of cars. These products are classified into product groups with common parts and like this product groups with commonality are regarded as product family. This paper proposes a BOM data model for product family structures and implements the practical EXCEL-based BOM management system for real small and medium manufacturing (SU) companies that produces automobile parts.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.29-33
• /
• 2012

Until now, The Market of aviation parts had led by OEM(Original Equipment Manufacturer) parts because of aviation industry's nature required higher reliability and safety. But recently, The interest about PMA parts in aviation market is increasing continuously with various environmental changes, such as economic stagnation, oil price rise, development of the manufacture technique and newly rising market of Asia-Pacific region. So, this paper introduces the trend and the requirements of FAA PMA / EASA EPA in order to enhance understanding for certification for aviation parts.

• Journal of Food Hygiene and Safety
• /
• v.18 no.4
• /
• pp.243-250
• /
• 2003

S-methylmethionine, vitamin U levels were affected by cultivars, parts fo Korean Chinese cabbages, and drying methods. Among drying conditions, freeze drying method appeared the best condition to maintain bitamin U content compared to oven and air drying methods. In the case of KOrean Chinese cabbages, outward leaves have high levels of chlorphyll and fiber. From this study, the outward parts contained high levels of vitamin U in two cultivars. Leaf parts were 1.1-21.2 times higher in vitamin U levels than midribs in both cultivars. This difference was shown most distinctively in freeze dried outward parts of Winter Pride cultivar. Like vitmnin U, fee amino acids also showed much higher levels in leaves. Levels of amino acids showed irregulatoy changing patterns at different parts and cultivar of Korean Chinese cabbages with various drying methods, Alanine and threonie appeared relatively aboundant amino acids in most parts of samples. Since no distinctive trends were observed in this rsult, it seems no relationship exists between amon oacids and bitamin U levels. Levels of methionine in differnent parts and cultivars of Korean Chinese cabbages dried with various methods did no show clear relationship with tlevel of vitamin U. Moreover, emthionine was not detected in freeze dired outward leaf parts which were the hithest parts of vitamin U levels in Winter Pride and 55 days cultivar. There were simila levels of methionine between overn and freeze drying. Samples prepared by air drying showed significatly lower levels than those by oven and freeze dryting. Methionine as aprecursor of vitamin U, may play a role in an increase of vitamin U during drying of KOrean Chinese cabbages.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.725-726
• /
• 2008

In this paper, we introduce an ubiWarehouse system for the management of automobile parts. Because automotive parts are very various in kinds according to companies, models and manufacture year, it's hard to find exactly the desired parts and to control goods in stock. To solve this problem, we propose the model of context recognizer in which context data are expressed in a systematic type of 5W1H. And initial context data are grouped and integrated, and some conflict context information is solved. Finally user's intention is interpreted and served. As a result, the proposed system can be used to enhance conveniency and correctness of the management of various kinds of part's.

• Journal of Plant Biology
• /
• v.30 no.2
• /
• pp.79-94
• /
• 1987

This study was carried out to investigate the epidermal structure, the stomatal types, the ontogeny of stomara in various parts of each organ of K. blossfeldiana, K. kewensis, and K. tometosa belonging to Kalanchoe. The epidermal cells were polygonal or isodiametric ones in the leaves, and mostly rectangular, tetragonal, and elongated ones in the leaves, and mostly rectangular, tetragonal, and elongated ones in the other organs. The candelabrum-like, triradiate stellete trichomes in the aerial parts of all organs of K. tomentosa were found. The cuticular striations and square crystals of calcium oxalate in the epidermal cells of petals of K. blossfeldiana were observed. The great majority of the mature stomata in various parts of all the organs were commonly helicocytic types. This type was subdivided into three subtypes such as parahelicocytic, anomohelicocytic, and dianisocytic stomata on the basis of the division angle of the guard mother cells. Somethies, the anisocytic type was found in most organs. This type was subdivided into three subtyes such as paranisocytic, nomoanisocytic, and dianisocytic stomata in the same way as the helicocytic type. A new stomataltype with anisocytic stoma within a girdle of four subsidiary cells of tetracytic type in the leaf of K. kewensis was firstly observed in the vascular plants. This type was termed the coaniso-tetracytic type. The anomomeristic pattern in the mesogenous category of stomatal types was found in various organs of all the material plants. Developmental mode of stomata was constant in all the parts of each organ within the same plant. The stomata was observed to be a few similar stomatal types in various parts of each organ within the same plant. The ontogeny of all the types is eumesogenous or mesogenous type. The ontogenetic type of stomata was mostly helico-eumesogenous type in all the organs of all the material plants. The mature stoma varied from organ to in regard of the number and arrangement of subsidiary cells.

• Journal of Ginseng Research
• /
• v.8 no.1
• /
• pp.8-14
• /
• 1984

A statistical analysis of saponin contents in various parts of raw red ginseng was studied. Saponin contents in main lateral and fee roots showed highly significant differences each other. Saponin contents in raw red ginseng had highly negative correlation with the root diameter (r= -0.926**). The estimation of saponin contents at mixing ratios of parts of root appeared to be possible.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.100-105
• /
• 1998

Image processing was used to recognize parts at various disposition. Non-transpatent tachometer panel for automobile and semi-transparent panel have been used as test specimen. Laplacian filter and various threshold values have been applied for preprocessing and edge following algorithm has been applied. Series of length data between edges have been generated from each image and compared using cross correlation coefficient. The result using cross correlation coefficient. The result using both edge following and cross correlation coefficient was proven to be the best fit for the proposed parts.