• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.31-39
• /
• 2011

In this paper, we propose a signal readout system with small area and low power consumption for CNT sensor arrays. The proposed system consists of signal readout circuitry, a digital controller, and UART I/O. The key components of the signal readout circuitry are 64 transimpedance amplifiers (TIA) and SAR-ADC with 11-bit resolution. The TIA adopts an active input current mirror (AICM) for voltage biasing and current amplification of a sensor. The proposed architecture can reduce area and power without sampling rate degradation because the 64 TIAs share a variable gain amplifier (VGA) which needs large area and high power due to resistive feedback. In addition, the SAR-ADC is designed for low power with modified algorithm where the operation of the lower bits can be skipped according to an input voltage level. The operation of ADC is controlled by a digital controller based on UART protocol. The data of ADC can be monitored on a computer terminal. The signal readout circuitry was designed with 0.13${\mu}m$ CMOS technology. It occupies the area of 0.173 $mm^2$ and consumes 77.06${\mu}W$ at the conversion rate of 640 samples/s. According to measurement, the linearity error is under 5.3% in the input sensing current range of 10nA - 10${\mu}A$. The UART I/O and the digital controller were designed with 0.18${\mu}m$ CMOS technology and their area is 0.251 $mm^2$.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.209-215
• /
• 2003

In this paper. We tested and fabricated the error amplifier for the 15 Watt linear power amplifier for the IMT-2000 baseband station. The error amplifier was comprised of subtractor for detecting intermodulation distortion, variable attenuator for control amplitude, variable phase shifter for control phase, low power amplifier and high power amplifier. This component was designed on the RO4350 substrate and integrated the aluminum case with active biasing circuit. For suppression of spurious, the through capacitance was used. The characteristics of error amplifier measured up to 45 dB gain, $\pm$0.66 dB gain flatness and -15 dB input return loss. Results of application to the 15 Watt feedforward Linear Power Amplifier, the error amplifier improved with 27 dB cancellation from 34 dBc to 61 dBc IM$_3$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1628-1633
• /
• 2005

Three hundred and twenty four one day old mixed sex broiler chicks were assigned at random into 9 treatment groups. The experimental design was a 3${\times}$3 factorial arrangement. During the starter period (week 1-3), chicks were fed ad libitum. A cornsoybean meal based diet contained 23% crude protein, 3,200 kcal/kg metabolizable energy (NRC, 1994), and supplemented with organic or inorganic forms of chromium. Two organic chromium products, chromium yeast (Cr-Yeast from Alltech Biotechnology Corporation Limited) and chromium picolinate (Cr-Pic) were supplemented at the rate of 200, 400 and 800 ppb. One inorganic product, chromium chloride, was supplemented at the rate of 200, 400 and 800 ppb. During the finishing period (week 4-7), the corn-soybean meal based diet contained 20% crude protein, 3,200 kcal/kg metabolizable energy (NRC, 1994), and the same levels of chromium as in the starter period were added. No significant difference was observed among treatment groups in average daily gain, feed intake, body weight gain, feed conversion ratio and mortality. The carcass percentage of broilers receiving 200 and 400 ppb organic chromium (Cr-Yeast or Cr-Pic) was significantly increased (p<0.01). In addition, the supplementation of organic chromium reduced (p<0.05) breast meat fat content but increased breast meat protein content. The addition of chromium in the diet had no effect on boneless breast, skinless boneless breast, boneless leg, skinless boneless leg but reduced percentage of sirloin muscle. Total cholesterol and triglycerides were reduced by organic Cr supplementation. Supplementation with 200 and 400 ppb of both Cr-Yeast and Cr-Pic showed the lowest total cholesterol. The effects of type of Cr on HDL and LDL were variable, however, LDL increased with increasing level of Cr supplementation. This trial indicates that organic chromium tended to improve growth performances and carcass composition, reduced total cholesterol and triglycerides. The optimum level of organic chromium supplementation was at 200 ppb.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.2
• /
• pp.57-64
• /
• 2007

This paper proposed the low power texture cache for mobile 3D graphics accelerators. It is very important to reduce the leakage power in the standby mode for mobile 3D graphics accelerators and the memory access latency of texture mapping in the active mode which needs a large memory bandwidth. The proposed structure reduces the leakage power using variable threshold values of power mode transitions according to the selected texture filtering algorithms of application programs, which has the run time gain for texture mapping. In the trace driven cache simulation the proposed structure shows the best 7% performance gain to the previous MSA cache according to the new performance metric considering both normalized leakage power and run time impact.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.2
• /
• pp.237-244
• /
• 2018

Objective: Piglet pre-weaning mortality is an important variable indicating the efficacy of farrowing management and animal well-being during lactation. The present study determined the association of newborn traits measured soon after birth with piglet pre-weaning mortality and growth. Methods: In total, 805 piglets born from 57 multiparous sows were investigated. Their blood oxygen saturation, blood glucose and rectal temperature at 24 h after birth (RT24h) were monitored. Birth order, sex, skin color, integrity of the umbilical cord, attempts to stand and birth intervention were monitored. Piglets were weighed at day 0, 7, and 21 to evaluate average daily gain (ADG). Results: Piglet pre-weaning mortality for lactation period was 12.6% and cumulative mortality during the first 7 days of age was 8.6%. A higher proportion of piglets with pale skin color died compared to piglets with normal skin color (26.7% vs 7.7%, p<0.001). A higher (p<0.001) proportion of piglets that attempted to stand after 5 min (38.5%) died compared to piglets that attempted to stand within 1 min (6.3%) after birth. Piglet body weight at birth ($BW_B$), blood glucose and the number of piglets born alive (BA) were correlated with ADG (p<0.05). Piglets with $BW_B$ <1.30 kg had higher (p<0.001) mortality rate than piglets with $BW_B{\geq}1.80 kg$ (19.0% vs 3.3%) and piglets with $BW_B$ 1.30 to 1.79 kg (4.0%). Piglet with RT24h <$37.0^{\circ}C$ had higher (p<0.001) mortality rate (86.2%) than piglets with RT24h >$38.5^{\circ}C$ (3.9%). Conclusion: Low $BW_B$ and low RT24h compromise piglet survival during the lactation period in the tropical conditions. Piglets in the litters with a high BA, low $BW_B$ and low blood glucose have reduced ADG.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.49-58
• /
• 2014

A low-swing differential near-ground signaling (NGS) transceiver for low-power high-speed mobile I/O interface is presented. The proposed transmitter adopts an on-chip regulated programmable-swing voltage-mode driver and a pre-driver with asymmetric rising/falling time. The proposed receiver utilizes a new multiple gain-path differential amplifier with feed-forward capacitors that boost high-frequency gain. Also, the receiver incorporates a new adaptive bias generator to compensate the input common-mode variation due to the variable output swing of the transmitter and to minimize the current mismatch of the receiver's input stage amplifier. The use of the new simple and effective impedance matching techniques applied in the transmitter and receiver results in good signal integrity and high power efficiency. The proposed transceiver designed in a 65-nm CMOS technology achieves a data rate of 13 Gbps/channel and 0.3 pJ/bit (= 0.3 mW/Gbps) high power efficiency over a 10 cm FR4 printed circuit board.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.73-80
• /
• 2008

The objective of current study is to develop an optimization technique for the seismic actively controlled building structures using active tendon devices by an efficient solution of LQR control gain. In order to solve the active control system, the Ricatti closed-loop algorithm has been applied, and the state vector has been formulated by the transfer matrix and solved by a numerical technique of the trapezoidal rule. The time-delay problem has been also considered by phase compensation. To optimize the performance index, the ratio of the weighted matrix is the design variable, allowable story drift limits of IBC 2000 and tendon forces have been applied as restraint conditions, and the optimum control program has been developed with the algorithm of the SUMT technique. In examples of the optimization problem of eight stories shear buildings, it is evaluated that the optimum controlled building is more suitable in the control of earthquake response than the uncontrolled system and can reduce the performance index to compare with the controlled system with a constant ratio of the weighted matrix.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1121-1129
• /
• 2009

In this paper, the UWB(Ultra-Wide Band) modules such as a pulse generator and the LNA(Low-Noise Amplifier) with AGC(Auto Gain Control) are designed to construct a cross-borehole pulse radar system, of which performance is compared with the existing system. The budget and specification of the radar system are determined by calculating the total path loss of the underground medium including an empty cavity. The pulse generator is fabricated to have the repeatation frequency 40 kHz, the pulse width lower than 5 ns and the peak signal level +73 dBm. The UWB LNA is designed to have the noise figure 3.77 dB, the variable gain range 100 dB and the frequency range of 20 MHz to 200 MHz. Compared with the existing system in an actual test site, the implemented system renders it possible to detect the blind area due to the UWB LNA with low noise figure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.10-16
• /
• 2005

This paper suggested the sulfur lamp power supply using Fuzzy Gain Scheduling(FGS), which was designed and confirmed the performance through manufacturing. it was based on Series Resonant Half Bridge Inverter(SRHBI), so that was applied Pulse Frequency Modulation(PFM), Zero Voltage Switching(ZVS), soft switching and soft start for input power variation and output power compensation. In order to get the lengthened life time of magnetron and stabilized output or power, power ratter and efficiency were improved by fuzzy gain algorism. It also made it possible to get not the existing foxed output power but continuous variable output power$(900\~1250[W])$. The manufactured power supply showed good results in input power $220[V]{\pm}15[\%]$ with stabilized output of power, luminous efficiency 97[1m/W] and power factor $96[\%]$.