• Journal of the Korean Wood Science and Technology
• /
• 제40권1호
• /
• pp.44-52
• /
• 2012

낙엽송 원통형 원주목에 대하여 수증기댐처리와 코팅처리를 실시하여 오-븐건조 하면서 건조속도, 재내의 수증기압 및 재온분포 및 건조할렬 등을 조사한 결과는 다음과 같다. 생재에서 난방된 실내의 이용함수율 수준인 함수율 약 8%까지 건조하는데 72~144시간 소요되었다. 무처리재와 코팅처리재는 전 건조기간에 걸쳐 통공층의 온도가 통피층의 온도보다 항상 높은 분포모형을 보인 반면, 수증기댐처리재의 경우 통피층의 온도가 통공층보다 높거나 같은 분포를 보였다. 수증기댐처리재와 코팅처리재의 경우는 거의 전 건조기간에 걸쳐 통피층의 수증기압이 통공층 보다 큰 분포를 보였다. 총체적으로 할렬발생 정도는 미약하였으며 할렬개수는 코팅처리재, 수증기댐처리재, 무처리재의 순으로 양호한 것으로 나타났다.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.737-744
• /
• 2013

We demonstrated size control of Au nanoparticles by heat treatment and their use as a catalyst for single-walled carbon nanotube (SWNTs) growth with narrow size distribution. We used uniformly sized Au nanoparticles from commercial Au colloid, and intentionally decreased their size through heat treatment at 800 oC under atmospheric Ar ambient. ST-cut quartz wafers were used as growth substrates to achieve parallel alignment of the SWNTs and to investigate the size relationship between Au nanoparticles and SWNTs. After the SWNTs were grown via chemical vapor deposition using methane gas, it was found that a high degree of horizontal alignment can be obtained when the particle density is low enough to produce individual SWNTs. The diameter of the Au nanoparticles gradually decreased from 3.8 to 2.9 nm, and the mean diameter of the SWNTs also changed from 1.6 to 1.2 nm for without and 60 min heat treatment, respectively. Raman results reconfirmed that the prolonged heat treatment of nanoparticles yields thinner tubes with narrower size distribution. This work demonstrated that heat treatment can be a straightforward and reliable method to control the size of catalytic nanoparticles and SWNT diameter.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.221-232
• /
• 2009

The allylamine plasma treatment is used to modify the surface properties of vapor grown carbon fibers (VGCF). It is to improve the interfacial bonding between the VGCF and epoxy matrix. The allylamine plasma process was performed by batch process in a vacuum chamber, using gas injection followed by plasma discharge for the durations of 20, 40 and 60 min. The interdependence of mechanical properties on the VGCF contents, treatment time and interfacial bonding between VGCF/ep was investigated. The interfacial bonding between VGCF and epoxy matrix was observed by scanning electron microscopy (SEM) micrographs of nanocomposites fracture surfaces. The changes in the mechanical properties of VGCF/ep, such as the tensile modulus and strength were discussed. The mechanical properties of allylamine plasma treated (AAPT) VGCF/ep were compared with those of raw VGCF/ep. The tensile strength and modulus of allyamine plasma treated VGCF40 (40 min treatment)/ep demonstrated a higher value than those of other samples. The mechanical properties were increased with the allyamine plasma treatment due to the improved adhesion at VGCF/ep interface. The modification of the carbon nanofibers surface was observed by transmission electron microscopy (TEM). SEM micrographs showed an excellent dispersion of VGCF in epoxy matrix by ultrasonic method.

• 자연과학논문집
• /
• 제10권1호
• /
• pp.103-109
• /
• 1998

본 연구는 오존의 강한 산화력을 이용하여 기상의 처리방법에 따른 비스코스 레이온의 탈색효과를 연구하였다. 오존이 발생할 때는 기체상태로 고농도이지만, 수용액 상태로 물에 녹이는 과정에서 기화요인에 의하여 오존의 손실이 많았다. 따라서 기존의 오존처리방법인 수용액상태의 처리방법이 아니라 기상의 오존을 직접 직물에 처리하므로 고농도의 오존을 단시간동안 처리하여 직물에 존재하는 색소를 산화시켜 탈색하는 방법을 사용하였다. 기상의 오존은 직접 유기색소와 반응하지 않기 때문에 물을 매개체로 하여 pick up ratio를 60%, 50%, 40%, 30%, 20%로 변화시키면서 비스코스 레이온의 탈색에 대하여 연구하였다. Pick up ratio가 40%일 때가 유기색소를 분해하는데 필요한 최적의 수산기가 발생하므로 처리포의 탈색효과가 가장 좋았다. 그러나 처리기간이 길수록 너무 과다하게 오존에 의해 산화되므로 강도와 신도의 저하를 초래하였다. 따라서 최적의 기상오존 처리시간은 60분정도에서 처리하는 것이 강도와 신도의 저하를 가장 적게 할 수 있고 백도도 향상시킬 수 있는 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.384.2-384.2
• /
• 2014

We investigated the electrical and structural properties of chemical vapor deposition (CVD)-grown graphene and post treated by O2 plasma. For the patterning of graphene, the plasma technology is generally used and essential for etching of graphene. But, the cautious O2 plasma treatments are required to avoid the damage in graphene edge which can be the harmful effects on the device performance. To analyze the effects of plasma treatment on structural properties of graphene, the change of surface morphology of graphene are measured by scanning electron microscope and atomic force microscope before and after plasma treatment. In addition, the binding energy of carbon and oxygen are measured through to X-ray photoelectron spectroscopy. After plasma treatment, the severe changes of surface morphology and binding energy of carbon and oxygen were observed which effects on the change of sheet resistance. Finally, to analyze of graphene characteristics, we measured the Raman spectroscopy. The measured results showed that the plasma treatment makes the upward of D-peak and downward of G'-peak by elevated power of plasma.

• 유기물자원화
• /
• 제8권1호
• /
• pp.60-68
• /
• 2000

바이오필터 기술은 수백 ppmC의 저농도 배가스를 처리하는 데에 있어 효과적이며, 비용이 저렴하고 환경적으로 건전한 처리방법이다. 적용범위로는 폐수처리장, 퇴비화시설, 음식물가공공장에서 발생되는 악취를 비롯하여 매립지가스 및 토양증기추출(SVE, soil vapor extraction)시 발생되는 휘발성 배가스의 처리등이 있다. 바이오필터 기술을 효과적으로 적용하기 위해서는 문헌연구를 꼼꼼하게 실시 한 후 실험실규모, 파일롯트규모, 그리고 현장규모로 점차 확대하여 실시하는 것이 바람직하다. 본고에서는 바이오필터 기술의 원리, 설계인자, 운전조건, 적용사례, 그리고 경제성 평가를 중심으로 고찰하였다.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.13-21
• /
• 2014

The object of this research is to perform the basic research for the development of selectively permeable membrane fabrics which is suitable for korean military in sense of embattlement. As a key factor of selectively permeable membrane fabrics which is suitable for korean military, this study selected the best PVA thickness and membrane selection for DMMP protection, pre-treatment method for conformational stability of face fabric and water/oil repellent process condition. Especially as the PVA coating thickness of the fabrics increase, peneration of DMMP decrease including water vapor permeation is lower. This study shows how physical features and permeability of chemical agents can be influenced by pre-treatment methods, the selection of selectively permeable membrane, the thickness of PVA etc. Results showed that outer shell / PVA / e-PTFE materials possessed performance with superior water vapor permeation (Over $3,000g/m^2/day$) and protective capability against DMMP vapor ($0.6{\mu}g/cm^2{\cdot}16hr$).

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.124-129
• /
• 2004

Nanosized WC and WC-Co powders were synthesised by chemical vapor condensation(CVC) process using the pyrolysis of tungsten hexacarbonyl(W(CO)$_6$) and cobalt octacarbonyl(Co$_2$(CO)$_8$). The microstructural changes and phase evolution of the CVC powders during post heat-treatment were studied using the XRD, FE-SEM, TEM, and ICP-MS. CVC powders were consisted of the loosely agglomerated sub-stoichimetric WC$_{1-x}$ and the long-chain Co nanopowders. The sub-stochiometric CVC WC and WC-Co powders were carburized using the mixture gas of CH$_4$-H$_2$ in the temperature range of 730-85$0^{\circ}C$. Carbon content of CVC powder controlled by the gas phase carburization at 85$0^{\circ}C$ was well matched with the theoretical carbon sioichiometry of WC, 6.13 wt％. During the gas phase carburization, the particle size of WC increased from 20 nm to 40 nm and the long chain structure of Co powders disappeared.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.697-702
• /
• 2001

열화학 기상 증착법을 이용하여 암모니아 처리에 따른 촉매 금속의 표면형태와 탄소 나노튜브의 성장을 조사하였다. 암모니아 처리의 열화학 과정의 조절에 의해 고르게 분산된 수직 성장된 탄소 나노튜브를 얻었다. 탄소 나노튜브 합성시 암모니아처리는 수직성장 및 고밀도 성장에 중요한 과정으로 그 역할에 대해 알아보았다. 고밀도의 수직 배향된 탄소나노튜브의 구조와 형태는 주사전자 현미경과 투과전자 현미경, 라만을 이용하여 관찰하였다.

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.763-769
• /
• 2005

Ferroelectric $ReMnO_3$(Re:Ho, Er) thin films were deposited on Si(100) substrate by Metal-Organic Chemical Vapor Deposition (MOCVD). Crystallinity and electric properties of $ReMnO_3$(Re:Ho, Er) thin films were investigated as a function of thermal heat treatment process, CHP (Conventional Heat-treatment Process) and RTP (Rapid Thermal Process). $ReMnO_3$(Re:Ho, Er) thin films prepared by RTP showed higher c-axis preferred orientation and homogeneous surface roughness than those prepared by CHP. The remnant polarization of ferroelectric hysteresis loop of $ReMnO_3$(Re:Ho, Er) thin films was strongly dependent on the c­axis preferred orientation of hexagonal single phase, and the leakage current characteristics of thin films were dependent on the homogeneity of grain size as well as surface roughness of thin films.