• Spatial Information Research
• /
• v.9 no.2
• /
• pp.263-275
• /
• 2001

With increasing of utilization of 1/1,000 Digital-Map being constructed with NGIS project, it is entering upon the stage that problem as the inspection of position accuracy of Digital-Map before its use. This paper evaluated position accuracy of Digital-Map being based on the construction of college facility management system into small area and presented modification/renovation of Digital-Map on area being occurred position error. With a view to evaluation of position error to building using RTK survey, position error was shown more than 0.5mm that is prescribed in survey-law. In order to acquire good position accuracy, first we carried out Static survey to college and selected control point. And, we evaluated coordinate value to important building from control point and compared these results with RTK survey results. Second, we carried out Affine transform based on the control point of building being surveyed with RTK, transformed pre-constructed Digital-Map and compared these results with RTK Survey results. We analyzed first and second method and presented improvement method of position accuracy of Digital-Map suited on small area.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.151-156
• /
• 2022

A detector using a small number of photosensors was designed, and the position of a scintillation pixel that interacted with gamma rays through a maximum likelihood position estimation(MLPE) was measured as a digital position. For this purpose, simulation was performed using DETECT2000, which can simulate the movement of light within the scintillator, and the accuracy of position measurement was evaluated. A detector was configured using a 6 × 6 scintillation pixel array and 4 photosensors, and a gamma ray event was generated at the center of each scintillation pixel to create a look-up table through the ratio of acquired light. The gamma-ray event generated at the new position was applied as the input value of the MLPE, and the positiion of the scintillation pixel was converted into a digital positiion after comparison with the look-up table. All scintillation pixels were evaluated, and as a result, a high accuracy of 99.1% was obtained. When this method is applied to the currently usesd system, it is concidered that the process of determining the position of the scintillation pixel will be simplified.

• Korean Journal of Materials Research
• /
• v.33 no.2
• /
• pp.54-62
• /
• 2023

The most comprehensive and particularly reliable method for non-destructively measuring the residual stress of the surface layer of metals is the sin²ψ method. When X-rays were used the relationship of ε_φψ-sin²ψ measured on the surface layer of the processing metal did not show linearity when the sin²ψ method was used. In this case, since the effective penetration depth changes according to the changing direction of the incident X-ray, σ_φ becomes a sin²ψ function. Since σ_φ cannot be used as a constant, the relationship in ε_φψ-sin²ψ cannot be linear. Therefore, in this paper, the orthogonal function method according to Warren's diffraction theory and the basic profile of normal distribution were synthesized, and the X-ray diffraction profile was calculated and reviewed when there was a linear strain (stress) gradient on the surface. When there is a strain gradient, the X-ray diffraction profile becomes asymmetric, and as a result, the peak position, the position of half-maximum, and the centroid position show different values. The difference between the peak position and the centroid position appeared more clearly as the strain (stress) gradient became larger, and the basic profile width was smaller. The weighted average strain enables stress analysis when there is a strain (stress) gradient, based on the strain value corresponding to the centroid position of the diffracted X-rays. At the 1/5 I_max max height of X-ray diffraction, the position where the diffracted X-ray is divided into two by drawing a straight line parallel to the background, corresponds approximately to the centroid position.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.39-44
• /
• 2018

Wideness variation technique is compounded the smooth diffusivity-vibration status of the fulgurate-space realization level (FSRL) on the wideness realization morph. The realization level condition by the wideness realization morph system is associated with the diffusivity-vibration system. As to search a position of the dot situation, we are acquired of the wideness value with constructed-point point by the diffusivity upper structure. The concept of realization level is composed the reference of fulgurate-space level for variation signal by the wideness vibration morph. Further displaying a smooth variation of the FSRL of the maximum-minimum in terms of the diffusivity-vibration morph, and wideness position vibration that was the a wideness value of the far variation of the $Wid-rm-FA-{\alpha}_{MAX-MIN}$ with $23.24{\pm}3.37units$, that was the a wideness value of the convenient variation of the $Wid-rm-CO-{\alpha}_{MAX-MIN}$ with $7.83{\pm}1.32units$, that was the a wideness value of the flank variation of the $Wid-rm-FL-{\alpha}_{MAX-MIN}$ with $2.99{\pm}0.51units$, that was the a wideness value of the vicinage variation of the $Wid-rm-VI-{\alpha}_{MAX-MIN}$ with $0.51{\pm}(-0.01)units$. The diffusivity vibration will be to evaluate at the smooth ability of the diffusivity-vibration morph with constructed-point by the wideness realization level on the FSRL that is displayed the fulgurate-space morph by the realization level system. Diffusivity realization system will be possible to control of a morph by the special signal and to use a wideness data of diffusivity vibration level.

• Journal of the Korean Home Economics Association
• /
• v.29 no.2
• /
• pp.121-134
• /
• 1991

The farm housewive's labor has not been properly evaluated, although it has traditionally shared and devoted a substantial portion of the farm household economy. The objective of this study is to estimate the money value of rural women's labor. The data were got from the result of time analysis of farm housewives in 1988. Among the four estimation methods used in this study, the mixed approach of houskeeper replacement cost with individual function cost showed the greatest value in the decision criteria of different farming region, farming size, housewive's age, family size and children number. The opportunity cost approach showed the lowest value, however, is considered as the most appropriate estimation approach in rural situation in this study. It is expected that the appropriate estimation approach should be estimate the money value of rural housewive's labor and their economic position.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3078-3080
• /
• 2005

본 논문에서는 AF 기능을 구현함에 있어서 2 백만 화소 카메라 모듈인 Sharp LZ0P3731의 기능, AF 모터 (VCM, Voice Coil Motor)에 작용하는 힘과 구동원리, 이를 구동하기 위한 H/W의 설계 특성, 및 DM270을 이용한 AF 제어 시 Focus Value의 특성 분석을 바탕으로 Focus Value 특성을 고려한 최적 AF 알고리즘을 개발하였다. 본 논문에서 제안한 최적 AF 알고리즘은 '최대의 Focus Value가 각 State의 Step Value 마다 각각 다른 위치에서 검출'되는 AF 모터 및 구동 H/W특성을 고려하여, 최적 AF 기능은 최대의 AF Value에 근접하는 Lens Position 제어가 가능하도록 하였다. 이를 검증하기 위한 윈도우용 S/W로 성능을 확인한 결과, 일반적인 AF 기능은 58 프레임으로 3.87초의 시간이 소요되는 반면, 제안한 AF 기능은 25 프레임으로 1.67초로 2배 이상의 빠른 AF 성능을 가졌다.

• International Journal of Computer Science & Network Security
• /
• v.21 no.4
• /
• pp.301-305
• /
• 2021

Scientific space, one can observe the differentiation of the definition of the terms "value", "value orientations" because it does not yet have a clear standard definition. Many researchers have dealt with this topic, researched, analyzed, observed, and made conclusions. However, there is still a rich scope for research of such phenomena of personal structure as value orientations. Psychologists-researchers who, in their scientific, practical, and theoretical works, dealt with the topic of values and value orientations and came to the general conclusion that values are a structural component of a personality, with the help of which a person achieves a goal, sets this goal, and characterizes position in life. Saw the relationship between values and the basic structures of the personality, including value orientations-considered in values a system of orientation and personality attitudes.

• Archives of Pharmacal Research
• /
• v.15 no.3
• /
• pp.256-262
• /
• 1992

For the evaluation of the role of substituents of ar-turmerone for its anticancer activity, ar-turmerone (1a) and its analogs like 2-methyl-6-(4'-methyphenyl)-2-octen-4-one (1b), 2-methyl-6-phenyl-2-hepten-4-one (1c), 2-methyl-6-phenyl-2-octen-4-one (1d) and 2 methyl-6-(trans-4'-methylcyclohexyl)-2-hepten-4-one (1e) were preparedd and their cytotoxic activities against $L_{1210}$ cell were determined. Omission of methyl group at para-position dose not variate the cytotoxicity of ar-turmerone. Elongation of alkyl group at 6-position decreases $ED_{50}$ value. Saturation of aromatic ring of ar-turmerone markedly decreases the cytotoxicity. Therefore the smaller size of alkyl group at 6-position and aromatic ring of ar-turmerone should be essential for exhibiting its anticancer activity.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1140-1142
• /
• 2002

This paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. The rotor position, which is an essential component of any vector control schemes, is calculated through the instantaneous stator flux position and an estimated flux value of rotating reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The validity of the proposed sensorless scheme is confirmed by simulation and its dynamic performance is examined in detail.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1241-1248
• /
• 2004

A controller of wheeled mobile robot(WMR) based on Lyapunov theory is designed and a Fuzzy-Neural Network algorithm is applied to this system to adjust controller gain. In conventional controller of WMR that adopts fixed controller gain, controller can not pursuit trajectory perfectly when initial condition of system is changed. Moreover, acquisition of optimal value of controller gain due to variation of initial condition is not easy because it can be get through lots of try and error process. To solve such problem, a Fuzzy-Neural Network algorithm is proposed. The Fuzzy logic adjusts gains to act up to position error and position error rate. And, the Neural Network algorithm optimizes gains according to initial position and initial direction. Computer simulation shows that the proposed Fuzzy-Neural Network controller is effective.