• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.419-420
• /
• 2012

Lithium-ion battery (LIB) usually used for valuable electronic devices are extended to applications. High stability negative electrode materials for LIB were investigated using electrodeposition of nanoparticles (NPs) on the nanostructured carbon. NPs with about 70 nm diameters were evenly prepared on the graphitic carbon materials using electrodeposition process at room temperature. It was observed that the NPs were homogeneously embedded into not only external surface but bottom part of the graphitic carbon network. The graphitic carbon material covered with NPs enables facile electron transport owing to the network structure and improves structural collapse during cycling. This facile room temperature process is expected to be applicable to other anode materials such as Sn and Al for the anode of LIB.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.91-106
• /
• 2019

The demand for lithium has increased sharply due to the explosive increase in lithium secondary batteries for environment-friendly vehicles (EV: Electric Vehicle, HEV: Hybrid Electric Vehicle, PHEV: Plug-in Hybrid Electric Vehicle). Traditionally, lithium has been produced mainly from lithium-containing minerals and brine, and recently it also has been recovered along with other valuable metals by recycling cathode materials of lithium secondary batteries. In this study, we comprehensively reviewed various recovering precesses of lithium from lithium-containing substances.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.29-36
• /
• 2013

Although Korean domestic production of flat panel displays totalled more than 48 trillion KRW in 2007, most of the flat panel display wastes have been land-filled or incinerated, which greatly overshadows Korean national prestige as a world leading producer and developer of flat panel display devices. Countries such as Japan or EU possess quite limited land-fill capability and have sought ways to dispose of WEEEs from environment-friendly perspective rather than recovery of valuable materials from the wastes. Considering relatively short cycle of about 5 years for flat panel display devices, it is estimated that more than 5 million units will be accumulated as wastes by 2015. Urban mining is a most suitable countermeasures against China's monopoly of rare and rare earth metals, which are contained in flat panel display wastes. Therefore, materials recycling of waste LCD units has to be developed and commercialized soon enough for economic and environment-friendly recovery of valuable resources hidden in LCD wastes.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.57-60
• /
• 2002

The stiffness model has been proposed to predict elastic constants of twisted yarn composites. The model is based upon the unit cell structure, the coordinate transformation, and the volume averaging of compliance constants for constituent materials. For the correlation of analytic results with experiments, composite samples of various yarn twist angle were tested. The samples were fabricated by the RTM process using glass yarns and epoxy resin. The correlations of elastic constants showed relatively good agreements. The model provides the predictions of the three-dimensional engineering constants, which are valuable input data for the analytic characterization of textile composites made of twisted yarn.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.3
• /
• pp.95-115
• /
• 2012

Although indium (In) is not an abundant element, the use of indium is expected to grow, especially as applied to copper-indium-(gallium)-selenide (CI(G)S) solar cells. In future when CIGS solar cells will be used extensively, the available amount of indium could be a limiting factor, unless a synthetic technique of efficiently utilizing the element is developed. Current vacuum techniques inherently produce a significant loss of In during the synthetic process, while electrodeposition exploits nearly 100% of the In, with little loss of the material. Thus, an electrochemical process will be the method of choice to produce alloys of In once the proper conditions are designed. In this review, we examine the electrochemical processes of electrodeposition in the synthesis of indium alloys. We focus on the conditions under which alloys are electrodeposited and on the factors that can affect the composition or properties of alloys. The knowledge is to facilitate the development of electrochemical means of efficiently using this relatively rare element to synthesize valuable materials, for applications such as solar cells and light-emitting devices.

• Journal of Engineering Education Research
• /
• v.13 no.1
• /
• pp.3-16
• /
• 2010

This paper is about to research the contents of writing course to foster communication skills for engineering students. Some domestic college writing textbooks were analyzed to list the course contents. Studying 'technical writing' leads to identify the materials for both basic composition skills and technical writing skills. Then some reasons for selecting those materials and things about professors for the course as well as teaching the course are discussed. Developing proper textbook and the techniques for teaching those materials is a valuable task for the writing course.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.33-37
• /
• 1997

This paper describes experimental results from emotional speech materials, which is analysed by various signal processing methods. Speech materials with emotional informations are collected from actors. Analysis is focused to the variations of pitch informations and durations. From the analysed results we can observe the characteristics of emotional speech. The materials from this experiment provides valuable resources for analysing emotional speech.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.34-37
• /
• 2008

The composite materials are widely used in the many applications of industry as well as aerospace field because of their high specific stiffness and strength which benefits the material and provides potential energy savings. However, composite materials also have a low property about external applied impact. In this paper, impact tests were conducted on different sample types(glass, carbon and kevlar composite) to obtain information such as absorbed energy and composite deformation using an instrumented impact test machine (DYNATUP 8250). 3 type samples were compared to experimental results. The data from impact test provided valuable information between the different type samples by wet lay up. This paper shows results of that kevlar composite has larger absorption energy and deformation than others.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.1
• /
• pp.32-50
• /
• 2024

Diabetes mellitus is one of the common chronic diseases, seriously threating to human health. The continuous monitoring of blood glucose concentration can effectively prevent diabetic diseases. The sensing performance of glucose non-enzymatic sensors is mainly determined by working electrode materials. Metal-organic frameworks (MOFs) are recognized as promising candidate for glucose sensor application, due to its large surface areas, ordered porous structure and nearly infinite designability. In this review, the sensing performance, research progress and future challenge of non-enzymatic glucose sensors based on MOF-based materials in recent years are presented. We hope that this review would provide valuable technology guidance for high performance non-enzymatic glucose sensors based on MOFs.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.6
• /
• pp.1056-1060
• /
• 2011

To summarize and make a reference number of natural materials used to treat diabetic peripheral neuropathy. We surveyed all papers of diabetic peripheral neuropathy studies using natural materials in PubMed as "diabetic peripheral neuropathy AND plant", "diabetic peripheral neuropathy AND herbal", "diabetic peripheral neuropathy AND herb", etc. The number of papers, the formation of experiments, frequency of natural materials studies, and main studies were analyzed. Total 48 studies were finally selected. Of the papers, experiments with rats were the most common. Most studies were about fatty acids or herbal medicines. Rehmannia glutinosa, Cinnamomi Ramulus, Astragali Radix and so on were relatively studied much. This study produced an overview of worldwide natural materials used for diabetic peripheral neuropathy. This result may provide a valuable information of development of Korean herbal medicine used to treat diabetic peripheral neuropathy.