• 조명전기설비학회논문지
• /
• 제22권1호
• /
• pp.87-94
• /
• 2008

본 연구는 밸리-필 정류기를 이용한 전류 THD 개선 방법을 제시한다. 제안된 회로는 밸리-필 정류기와 부스팅 인덕터를 결합한 구조를 가지며, AC/DC 변환과 PFC를 동시에 수행한다. PWM 스위칭에 따른 부스팅 효과로 입력전류를 제어하여 밸리-필 정류기의 특성을 개선한다. 이 결과는 낮은 전류 THD를 보장한다. 동작 모드와 전류 THD를 분석하고, 최적 부스팅 인덕터를 결정한다. 밸리-필 정류기와 부스팅 인덕터를 채용한 100[W] AC/DC 컨버터를 제작하였고, 시뮬레이션과 실험으로 제안된 방법의 타당성을 검증하였다.

• Wind and Structures
• /
• 제24권6호
• /
• pp.565-578
• /
• 2017

The meteorological model WRF is used to investigate the wind circulation in Valle Camonica, Italy, an alpine valley that includes a large subalpine lake. The aim was to obtain the information necessary to evaluate the wind potential of this area and, from a methodological point of view, to suggest how numerical modeling can be used to locate the most interesting spots for wind exploitation. Two simulations are carried out in order to analyze typical scenarios occurring in the valley. In the first one, the diurnal cycle of thermally-induced winds generated by the heating-cooling of the mountain range encircling the valley is analyzed. The results show that the mountain slopes strongly affect the low-level winds during both daytime and nighttime, and that the correct setting of the lake temperature improves the quality of the meteorological fields provided by WRF significantly. The second simulation deals with an event of strong downslope winds caused by the passage of a cold front. Comparisons between simulated and measured wind speed, direction and air temperature are also shown.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.766-773
• /
• 2018

In this paper, temperature dependence of the excitonic bands in a mechanically exfoliated tungsten diselenide ($WSe_2$) monolayer is studied using photoluminescence and circular dichroic photoluminescence (PL) in the temperature range between 8 and 300 K. The peak energies associated with the neutral exciton (A), charged exciton (trion) and localized excitons are extracted from the PL spectra revealing a trion binding energy of around 30 meV. The circular dichroic PL measured at 8 K shows about 45% valley polarisation that sharply reduces with increasing temperature to 5% at 300 K with photoexcitation energy of 1.96 eV. A detailed analysis of the emission line-width suggests that the rapid decrease of valley polarisation with the increase of temperature is caused by the strong exciton-phonon interactions which efficiently scatter the excitons into different excitonic states that are easily accessible due to the supply of excess photoexcitation energy. The emission line-width broadening with the increase of temperature indicate residual exciton dephasing lifetime < 100 fs, that correlates with the observed rapid valley depolarisation.

• 한국지형학회지
• /
• 제24권3호
• /
• pp.47-59
• /
• 2017

This study aims to analyze geomorphologically Jaein Falls in Hantangang Lava Plateau for the landform structure, landform classification, falls dissection and recession. The height and recession length of the Falls are approximately 18m and 340m. after dissection valley arrive at area of the Jijangbong Volcanic Rock Complex of Mesozoic era, the fall will disappear. The structure of the dissection valley shows totally well vertical columnar joint near falls and plunge pool, colluvial talus deposits toward lower reach by the freezing-thawing and wet-dry activities, and alluvial cone and delta in estuary to Hantangang River. The Falls' age date and recession rate in the valley maybe relate to the age of the lava plateau. The estimated recession rate of the fall should be 8.75m/ka to 2.3m/ka, depending on the age 500ka to 40ka in lava plateau.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.19-30
• /
• 2018

This study tries to infer fault lines and produce a map for the lines based on a classification of fault-related landforms and fluvial landformsin the Gyeongju area of the Yangsan Fault Valley. Fault activities in the study area are thought to be older than the time of river formation or stronger than the erosion by river, while the northern and southern parts of the study area seem to have experienced fault activities after valley formation. It is also possible that weaker fault activities than the erosion by river seem to have been prevailed in the parts. In the study area, the Gyeongju alluvial fan is located within a wide erosional valley at the joint area of the Yangsan and Ulsan Faults. From the distribution of the landforms, it is inferred that several fault lines parallel to the Yangsan Fault are distributed at both sides of the fault valley. In particular, the area from Bae-dong to Nogok-ri, Naenam-myeon shows the most obvious linearity of the landforms within the study area. Several fault lines with a direction of NNE-SSW are also found around the epicenter of the 2016 Gyeongju Earthquake.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 춘계학술대회논문집
• /
• pp.91-100
• /
• 2003

In this paper we investigate the role that warfare played In the formation of the network of alliances between sites that are associated with the formation of the state in the Valley of Oaxaca, Mexico. A model of state formation proposed by Marcos and Flannery (1996) is used as the basis for an agent-based simulation model. Agents reside in sites and their actions are constrained by knowledge extracted from the Oaxaca Surface Archaeological Survey (Kowalewski 1989). The simulation is run with two different sets of constraint rules for the agents. The first set is based upon the raw data collected in the surface survey. This represents a total of 79 sites and constitutes a minimal level of warfare (raiding) in the Valley. The other site represents the generalization of these constraints to sites with similar locational characteristics. This set corresponds to 987 sites and represents a much more active role for warfare in the Valley. The rules were produced by a data mining technique, Decision Trees, guided by Genetic Algorithms. Simulations were run using the two different rule sets and compared with each other and the archaeological data for the Valley. The results strongly suggest that warfare was a necessary process in the aggregations of resources needed to support the emergence of the state in the Valley.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2935-2938
• /
• 2003

A new Valley-fill circuit for improving PF(power factor) is proposed in this paper. The proposed topology combines Valley-fill rectifier and an additional inductor for boosting. In the proposed circuit, a shapc of input current is related to the PWM duty cycle. The boosting inductor makes improve PF by the electric charge transfer action. The operation principle and the shape of input current arc analyzed as applied the boosting inductor. The optimum value of boosting inductor is determined. A 100W single-stage converter has been designed and tested. Experimental results are presented to verify the validity of the proposed converter.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2004년도 생명공학 실용화를 위한 비젼
• /
• pp.197-197
• /
• 2004

• 디지털융복합연구
• /
• 제6권3호
• /
• pp.35-43
• /
• 2008

This research was to analyze information network which contributed Anyang Venture Valley's development. And mutual communication between regional innovated companies was the essential factor of this growth. Anyang city with its Knowledge Industry Promotion Agency, KIPA, has first set up communication network, facility and other structures to create basis of communication. For that, they were able to operate various networking and promotion of communication which led to the enforcement of regional innovation in venture businesses. During its innovation, KIPA played a key role as a link between regional Innovated companies, which enabled active interactions between them. Government can verify significance of establishing network base with mediation function for lively communication for promoting innovation capability through Anyang Venture Valley's case.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.791-797
• /
• 2007

This paper proposes a semiautomatic vertebra segmentation method that overcomes limitations of both manual segmentation requiring tedious user interactions and fully automatic segmentation that is sensitive to initial conditions. The proposed method extracts fence surfaces between vertebrae, and segments a vertebra using fence-limited region growing. A fence surface is generated by a deformable model utilizing valley information in a valley emphasized Gaussian image. Fence-limited region growing segments a vertebra using gray value homogeneity and fence surfaces acting as barriers. The proposed method has been applied to ten patient data sets, and produced promising results accurately and efficiently with minimal user interaction.