• Journal of Intelligence and Information Systems
• /
• v.10 no.3
• /
• pp.105-114
• /
• 2004

In the past year, the increasing concern about the biometric recognition makes the great activities on the security fields, such as the entrance control or user authentication. In particular, although the features of face recognition, such as user friendly and non-contact made it to be used widely, unhappily it has some disadvantages of low accuracy or low Re-attempts Rates. For this reason, I suggest the new approach to re-classify the classified data of recognition result data to solve the problems. For this study, I will use the typical appearance-based, PCA(Principal Component Analysis) algorithm and verify the performance improvement by adopting the re-classification approach using 200 peoples (10 pictures per one person).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1966-1967
• /
• 2007

Photovoltaic(PV) power generation system [1-2] has been extensively studied and watched with keen interest as a clean and renewable power source. So hardware and software studies strongly indicate the feasibility of commercially producing a low cost, user-friendly solar cell curve tracer. Generally, V-I curve tracer indicates only the commonly used solar cell parameters. However, with the conventional V-I curve tracer it is almost impossible to abstract the more detail parameters of solar cell ; A, Rs, and Rsh, which satisfies the user, who aims at the analysis of the development PV power generation system; advanced simulation. In this paper, the proposed method gives us the satisfactory results to abstract the detail parameters of solar cell ; A, Rs, and Rsh

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.54-62
• /
• 1992

This work has been directed at studying and developing a prototype Computer Aided Design(CAD) tool to be used for planning tendon paths in hand reconstructive surgery. The application of CAD to rehabilitative surgery of the hand is a new field of endeavor. There are currently no existing systems designed to assist the orthopedic surgeon in planning these complex peocedures. Additionally, orthopedic surgeons are not trained in mechanics, kinematics, math modeling, or the use of computers. It was also our intent to study the mechanisms and the efficacy of the application of CAD techniques to this important aspect of hand surgery. The following advances are reported here: Interactive 3D tendon path definition tools., Software to calculate tendon excursion from an arbitrary tendon path crossing any number of joints., A model to interactively compute and display the foirces in muscle and tendon., A workstation environment to help surgeons evaluate the consequences of a simulated tendon transfer operation when a tendon is lengthened, rerouted, or reattached in a mew location., It also has been one of the primary concerns in this work that an interactive graphical surgical workstation must present a natural, user-friendly environment to the orthopedic durgeon user. The surgical workstation must ultimately aid the surgeon in helping his patient or in doing his work more efficiently or more reliably.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.31-36
• /
• 2004

As internet technology has rapidly developed, there have been works for the strategic techniques of the geographic information system integration and component that meet the situation of the variable customer requirement in endless change of execute environment. So there needs a design techniques of spatial data common component that can support technology and Query Processing, and so on. In this thesis, design techniques is proposed to support user-friendly interface and query currently available every place to provide these local-based software development technology. This process was evaluated through an verification test with a widely used development methodology The proposed methods is applied for computation and can reduce software development life cycle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1001-1006
• /
• 2005

A Robot Performance Evaluation System(RPES) with the laser tracker Leica LTD 500 was developed according to the ISO 9283 robot performance criteria. The developed system is set up a test robot to continuously move the prescribed cyclic trajectories without a human intervention and the laser tracker to simultaneously measure the robot's movement. And then, the system automatically extracts the required data from the tremendous measured data, and computes the various performance criteria which represents the present state of the test robot's performance. This paper explains how ISO 9283 robot performance criteria was used for the developed system, and suggests a automatic data extraction algorithm from the mass of measured data. And also, a user-friendly Robot Performance Evaluation System(RPES) Software was developed with Visual Basic satisfying the need of Hyundai Motor Company. The developed system was implemented on NACHI 8608 AM 11 robot. The resulted output shows the effectiveness of the developed system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.416-423
• /
• 2003

During the last ten years, the need has been increased for reducing maintenance cost for aged equipments and ensuring safety, efficiency and profitability of petrochemical and refinery plants. RBI (Risk Based Inspection) methodology is one of the most promising technologies satisfying the need in the field of integrity management. In this study, a user-friendly software, realRBl for RBI based on the API 581 code was developed. This software has modules for evaluating qualitative and semi-quantitative risk level, analyzing quantitative risks using the potential consequences of a failure of the pressure boundary, and assessing the likelihood of failure. A quantitative analysis was performed for 16 columns in a domestic NCC (Naphtha Cracking Center) plant whose operating time reaches about 12 years. Each column was considered as two equipment parts by dividing into top and bottom. Generic column failure frequencies were adjusted based on likelihood data. After determining release rate, release duration and release mass for each failure scenario, flammable/explosive and toxic consequences were assessed. Current risks for 32 equipment parts were evaluated and risk based prioritization were determined as a final result.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.4
• /
• pp.231-242
• /
• 2003

Multidisciplinary Design Optimization (MDO) is an optimization technique considering simultaneously multiple disciplines such as dynamics, mechanics, structural analysis, thermal and fluid analysis and electromagnetic analysis. A software system enabling multidisciplinary design optimization is called MDO framework. An MDO framework provides an integrated and automated design environment that increases product quality and reliability, and decreases design cycle time and cost. The MDO framework also works as a common collaborative workspace for design experts on multiple disciplines. In this paper, we present the architecture for an MDO framework along with the requirement analysis for the framework. The requirement analysis has been performed through interviews of design experts in industry and thus we claim that it reflects the real needs in industry. The requirements include integrated design environment, friendly user interface, highly extensible open architecture, distributed design environment, application program interface, and efficient data management to handle massive design data. The resultant MDO framework is datasever-oriented and designed around a centralized data server for extensible and effective data exchange in a distributed design environment among multiple design tools and software.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.271-279
• /
• 1998

This paper discusses the development of compaction management system using Real Time Kinematic (RTK) GPS technology for the efficient management or compaction. The use or RTK provides the land surveyors with a graphical display of his/her corrected position on the ground at that moment in time. In this work, we intended to improve the efficiency of compaction management showing the route of rollers and the total number of compaction obtained from management software (GPSROLL v.1.0) developed in this study. The RTK GPS system installed on the roller. To improve the efficiency of field management, GPSROLL software provides also data processing module for the field soil test and the field surveying data. GPSROLL system is based on the Korean GUI for user-friendly data input and output.

• Genomics & Informatics
• /
• v.6 no.3
• /
• pp.126-129
• /
• 2008

The robust identification and comprehensive profiling of copy number alterations (CNAs) is highly challenging. The amount of data obtained from high-throughput technologies such as array-based comparative genomic hybridization is often too large and it is required to develop a comprehensive and versatile tool for the detection and visualization of CNAs in a genome-wide scale. With this respective, we introduce a software framework, CGHscape that was originally developed to explore the CNAs for the study of copy number variation (CNV) or tumor biology. As a standalone program, CGHscape can be easily installed and run in Microsoft Windows platform. With a user-friendly interface, CGHscape provides a method for data smoothing to cope with the intrinsic noise of array data and CNA detection based on SW-ARRAY algorithm. The analysis results can be demonstrated as log2 plots for individual chromosomes or genomic distribution of identified CNAs. With extended applicability, CGHscape can be used for the initial screening and visualization of CNAs facilitating the cataloguing and characterizing chromosomal alterations of a cohort of samples.

• The Korean Journal of Applied Statistics
• /
• v.17 no.1
• /
• pp.173-184
• /
• 2004

A statistical software for nonlinear regression analysis, NLIN2000, is introduced. This software, operated tinder the Window systems, has many user-friendly functions and Provides various statistics. As an upgraded version of the Previous Program operated under the DOS system, NLIN2000 provides easier steps for model specification and fitting process than any other statistical packages. Also it has a database system for model functions which has addition and deletion options. While it can be a useful research tool for statisticians, NLIN2000 can be used practically also by researchers in many other scientific fields, who needs nonlinear regression analysis for their study.