• Journal of the Korean Geotechnical Society
• /
• v.22 no.1
• /
• pp.5-14
• /
• 2006

A simple and useful plane strain testing device was newly developed and its mechanical features were presented in this paper. The new testing device was designed to be capable of testing various stress paths expected under plane strain condition with only the conventional triaxial loading system. The applicability of the new testing device was systematically checked both by theoretical evaluation and by experiments. As a result, it was found that the new testing device has much wider range of application than the conventional plane strain testing devices.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.9
• /
• pp.1189-1195
• /
• 2014

A strain-specific identification method is required to secure Chlorella strains with useful genetic traits, such as a fast growth rate or high lipid productivity, for application in biofuels, functional foods, and pharmaceuticals. Microsatellite markers based on simple sequence repeats can be a useful tool for this purpose. Therefore, this study developed five novel microsatellite markers (mChl-001, mChl-002, mChl-005, mChl-011, and mChl-012) using specific loci along the chloroplast genome of Chlorella vulgaris. The microsatellite markers were characterized based on their allelic diversities among nine strains of C. vulgaris with the same 18S rRNA sequence similarity. Each microsatellite marker exhibited 2~5 polymorphic allele types, and their combinations allowed discrimination between seven of the C. vulgaris strains. The two remaining strains were distinguished using one specific interspace region between the mChl-001 and mChl-005 loci, which was composed of about 27 single nucleotide polymorphisms, 13~15 specific sequence sites, and (T)n repeat sites. Thus, the polymorphic combination of the five microsatellite markers and one specific locus facilitated a clear distinction of C. vulgaris at the strain level, suggesting that the proposed microsatellite marker system can be useful for the accurate identification and classification of C. vulgaris.

• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.445-450
• /
• 1975

These experiments were carried out to obtain useful yeast for Korean grape wine brewing. The 213 strains of yeasts were isolated from grapes sampled in Daejeon city and suburbs and then 3 strains among the isolated yeasts were selected as useful strains and identified. The results obtained as follows; 1. The 3 strains of W-49, W-50 and W-127 selected as useful yeasts were clarified to grape wine mash rapidly. 2. In the mashes clarified after storage of 45 days, the value of optical density of the case of W-50 strain was highest and the color was very thick, compared with the case of another strains. 3. In the pannel test of the grape wines, the case of W-49 and W-50 strains were best, the case of the W-127 strain and control yeast, Hb were similar each other as next order. 4. Among 3 strains selected as useful yeasts it were identified that the strains of W-49, W-50 selected as useful strains were Saccharomyces cerevisiae and the strain of W-127 was Saccharinyces pretoriencis by the Ladder manual. 5. All of these useful yeasts were appeared red color on TT C stain.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1373-1380
• /
• 1992

The local cyclic strain distribution near the crack tip has been investigated by the fine Dot Grid Strain Measurement Method, which had been suggested strain measurement method to resolve experimental difficulties by authors. It has been found that the magnitude of the local cyclic strain distribution(.DELTA..epsilon.$_{eq}$ )near a crack tip has been varied by the applied cyclic load level and material, but the shape of the local cyclic strain distribution near the crack tip has been experimentally scrarcely altered : that is .DELTA..epsilon.$_{eq}$ = .DELTA.A.f(.theta.). $r^{-1}$ . Consequently, the local cyclic strain field near the crack tip could be favorably characterized by a single parameter fatigue strain intensity factor .DELTA.A. In addition, with the viewpoint that .DELTA.A depends on material and load level, .DELTA.A has been applied to evaluate the fatigue crack propagation rate and usefulness of the result has been considered. As a result, it has been ascertained that .DELTA.A has been a useful parameter to evaluate the fatigue crack propagation rate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.25-33
• /
• 2020

To investigate the relationship between strain distribution and tensile properties of brittle material, five types of tensile coupon of carbon fiber reinforced polymer (CFRP) modified the tab portion in order to have a strain distribution including S0, SD1, SD2, SV1, SV2 were tested. The ultimate stress and strain of SD2 and SV2 which was intended to have larger strain distribution were smaller than those of SD1 and SV1, that was more clearly shown in the test results of the symmetric coupons (SV series) than the asymmetric coupons (SD series). In addition, the ultimate stress and strain of most coupons with strain distribution in this study were decreased when compared to the control group with uniform strain. These results were analyzed in various ways through 1) the average of the strain values directly measured by the strain gages, 2) the converted strain calculated by dividing the total deformation by the effective length, and 3) the ultimate effective strain derived from both the elastic modulus and the ultimate load. The values measured by strain gage indicates response of the local region precisely, but it does not represent the response from whole section. However, the converted strain and effective strain can supplement disadvantage of gage because they represent the average response of whole section. In particular, the effective strain can provide rupture strain conservatively, which can be utilized in practice, when the value obtained by strain gage was not effective due to gage damage or abnormal gage readings near ultimate load. This value provides a value that can be used even when partial rupture has occurred and is reasonably useful for specimens with strain distribution.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.104-109
• /
• 2001

The yield of infective juveniles of Heterorhabditis bacteriophora (Tf strain) in vitro monoxenic liquid culture was improved significantly as the amount of symbiont biomass, Photorhabdus sp. strain Tf, increased. To investigate the influence of abiotic factors on the growth and biomass production of Photorhabdus sp. strain Tf, triplicate flask cu1tmes were performed. The optinal temperature and medium pH for the growth of Photorhahdus sp. strain Tf were 30$^{\circ}$C and between pH 5.5-7.3, respectively. Aeration also improved greatly growth and yield of biomass of Photorhabdus sp. strain Tf. Photorhabdus sp. strain Tf in batch fermentation showed growth-associated pattem in terms of pigment production, and the pH of culture medium rose steadily until growth stopped dUling the fermentation. Both pigment production and culture pH rise would be useful parameters indicating a reliable growth of Photorhabdus sp. strain Tf.

• Korean Journal of Microbiology
• /
• v.49 no.2
• /
• pp.195-199
• /
• 2013

A bacterial strain MPL-01 was isolated from the large intestine of a wild boar. The strain was shown to have morphological, physiological and biochemical characteristics, fatty acids composition typical of Bacillus. The 16S rRNA gene sequence showed that the isolate formed distinct phyletic line that was most closely related to this of Bacillus atrophaeus (99.99%). It was proposed that the strain is classified as B. atrophaeus MPL-01. The strain MPL-01 exhibited the strongest antifungal activity against Colletotrichum acutatum, the pathogen of anthracnose of chili peppers. The ethyl acetate extract of culture filtrate possessed not only the antifungal activity but also the bio-surfactant activity. Therefore, the strain MPL-01 could be a useful bacterium in the development of bio-control process against the pathogenic fungi.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.750-757
• /
• 2003

In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W$\_$c/t$\^$p/ = B(where W$\_$c/ = $\sigma$$\varepsilon$ is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this Purpose, the creep tests for generating 1.0% strain for commercial type i16 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593$^{\circ}C$. The plots of log W$\_$c/ - log t showed a good linear relation up to 10$\^$5/ hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of isochronous stress-strain curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials.

• Advances in materials Research
• /
• v.5 no.4
• /
• pp.299-318
• /
• 2016

Analytical investigations were performed of a longitudinal crack representing a cylindrical surface in circular shafts loaded in torsion with taking into account the non-linear material behavior. Both functionally graded and multilayered shafts were analyzed. It was assumed that the material is functionally graded in radial direction. The mechanical behavior of shafts was modeled by using non-linear constitutive relations between the shear stresses and shear strains. The fracture was studied in terms of the strain energy release rate. Within the framework of small strain approach, the strain energy release rate was derived in a function of the torsion moments in the cross-sections ahead and behind the crack front. The analytical approach developed was applied to study the fracture in a clamped circular shaft. In order to verify the solution derived, the strain energy release rate was determined also by considering the shaft complimentary strain energy. The effects were evaluated of material properties, crack location and material non-linearity on the fracture behavior. The results obtained can be applied for optimization of the shafts structure with respect to the fracture performance. It was shown that the approach developed in the present paper is very useful for studying the longitudinal fracture in circular shafts in torsion with considering the material non-linearity.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.164-169
• /
• 1995

An endogenous cryptic plasmid, pBL1, which has been used to construct plasmid vectors for coryneform bacteria producing amino acids, was eliminated from Brevibacterium lactofermentum. The pBL1 was partially digested with Sau3AI and the resulting DNA fragments were subcloned into a suicide vector pEM1 which contains a kanamycin-resistant (km$^{r}$) gene. KM$^{r}$ B. lactofermentum transconjugants were obtained by conjugal transfer of the pEM1 derivatives containing pBL1 DNA fragments from Escherichia coli into B. lactofermentum. A km$^{r}$ transconjugant was analyzed to contain a plasmid pEB14, which occurred in vivo by homologous recombination between pBL1 and the conjugal-transferred plasmid. The pEB14 including the pEM1-derived km$^{r}$ gene was found to be lost concomitantly with km$^{r}$ phenotype, resulting in the construction of a pBL1-free strain of B lactofermentum. Based on transformation efficiencies and plasmid stability, the resultant pBL1- free strain is more useful than wild strain as a host cell for genetic manipulation. It could be concluded that foreign plasmid DNAs are efficiently isolated and analyzed from the pBL1-free strain because of the absence of endogenous pBL1 plasmid.