• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.9-16
• /
• 2005

This paper presents the development of new anisotropic conductive adhesives with enhanced thermal conductivity for the wide use of adhesive flip chip technology with improved reliability under high current density condition. The continuing downscaling of structural profiles and increase in inter-connection density in flip chip packaging using ACAs has given rise to reliability problem under high current density. In detail, as the bump size is reduced, the current density through bump is also increased. This increased current density also causes new failure mechanism such as interface degradation due to inter-metallic compound formation and adhesive swelling due to high current stressing, especially in high current density interconnection, in which high junction temperature enhances such failure mechanism. Therefore, it is necessary for the ACA to become thermal transfer medium to improve the lifetime of ACA flip chip joint under high current stressing condition. We developed thermally conductive ACA of 0.63 W/m$\cdot$K thermal conductivity using the formulation incorporating $5 {\mu}m$ Ni and $0.2{\mu}m$ SiC-filled epoxy-bated binder system to achieve acceptable viscosity, curing property, and other thermo-mechanical properties such as low CTE and high modulus. The current carrying capability of ACA flip chip joints was improved up to 6.7 A by use of thermally conductive ACA compared to conventional ACA. Electrical reliability of thermally conductive ACA flip chip joint under current stressing condition was also improved showing stable electrical conductivity of flip chip joints. The high current carrying capability and improved electrical reliability of thermally conductive ACA flip chip joint under current stressing test is mainly due to the effective heat dissipation by thermally conductive adhesive around Au stud bumps/ACA/PCB pads structure.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.225-231
• /
• 2001

The fish species collected in the Keumho River basin are 42 species 31 genera belonging to 15 Families. This report was investigated for the evaluation of water quality in the Keumho River system which is a tributary of Nakdong River in Korea on september in 1999. The fishes collected were 42 species, 31 genera belonging to 15 Families. The dominant species were 5 species; Zacco platypus, Zacco temmincki, Squalidus chankaensis tsuchigae, Moroco oxycephalus, Squalidus gracilis majimae, and 8 species; Hemibarbus longirostris, Pseudogobio esocinus, Culter brevicauda, Cobitis rotundicaudata, Pseudobagrus fulvidraco, Pungitius sinensis kaibarae, Monopterus albus, Channa argus were rare species. The relationship among the GPI, EC and BOD by the organic pollutants were over 0.9. The group pollution index(GPI) was lowest at St. 1(0.85) and highest at St. 1(0.85) and highest at St. 5(2.33). The water quality of the Keumho river divided into 3 parts; the water of upper reaches in river(St. 1) was 1st class(oligotrophic condition), middle parts(St. 2, 3, 4) were 3rd class($\alpha$-mesosaprobic condition) and lower part(St. 5) was 4th class(Polysaprobic condition) as the source of tap water, respectively. And the tributary which are the Sinryeong Stream(St. 6), the Sincheon(St. 7) and the Donghwa Stream(St. 9) in Keumho river were 2nd class as the source of tap water. The results in this study was represented same patterns as the result by the use of indicator species like as algae and invertebrates for the discrimination of water quality. So, some freshwater fish species can be use applicant for the discrimination of water quality.

• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.247-255
• /
• 2007

During the winter season in Korea, the relative humidity of greenhouse at night often exceeds 90% because air temperature inside the greenhouse is usually controlled using a heater with all of windows closed to minimize heat loss, thereby requiring the use of a dehumidifier that can maintain optimum humidity levels of $70{\sim}80%$ to provide a good growth condition of crops. Also, such a high humid condition can cause the development of a pest, such as insects, fungi or diseases. However, the use of most conventional dehumidifiers for low temperature dehumidification is limited because their performance is degraded due to frost accumulation on the evaporator coil. This study was carried out to develop a refrigeratory-based dehumidifier suitable for low temperature dehumidification in greenhouse cultivation. The developed dehumidifier consists of a condenser and an evaporator installed separately so that relative and absolute humidity levels can be reduced when air passed through the condenser and evaporator, respectively. The prototype dehumidifier showed a dehumidification capacity of $5{\sim}7kg/h$ when air with a temperature of $15{\sim}25^{\circ}C$ and a relative humidity of $70{\sim}95%$ came into the dehumidifier. Under the condition that either temperature or relative humidity was fixed, the amount of condensed water was proportional to the levels of both temperature and relative humidity.

• The Journal of Internal Korean Medicine
• /
• v.37 no.2
• /
• pp.374-380
• /
• 2016

Objective: Although the incidence of chronic hepatitis B has decreased around the world due to widespread national preventative control measures, mortality from the same condition can increase if the condition leads to liver cancer or liver cirrhosis. In most cases, herbal medicine does not show any statistically significant effects related to liver damage, but preconceptions do exist that herbal medicine can be toxic and cause such liver damage. To investigate this situation, this study therefore investigated a patient with hepatitis B who had combined traditional Korean medicine therapy and the use of analgesic drugs during a hospitalization period.Method: A patient with hepatitis B was given combined traditional Korean medicine therapy and the use of analgesic drugs during a hospitalization period.Results: Within 26 days, the patient was free from liver damage during the hospitalization period. She was followed up with a liver function test and was discharged after her condition improved; she also reported decreased back pain.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.773-775
• /
• 2010

Diagnostic X-ray high voltage generator needs high voltage input power when operated, if electric power conditions are not suitable, could not use diagnostic X-ray high voltage generator or could not use normally by abnormal working. If diagnostic X-ray system operated with abnormally by electric power conditions, it cause of difficulty of patient diagnosis. And we used auxiliary power with battery to operate diagnostic X-ray high voltage generator without using normal electric power. We made one device after designing of new electric circuit and we compared normal power X-ray system with battery powered X-ray system by described method in this thesis. And then we found characteristic and efficiency of diagnostic X-ray high voltage generator by different input power condition.

• Composites Research
• /
• v.34 no.5
• /
• pp.277-282
• /
• 2021

Graphene oxide can be reduced to graphene under supercritical fluid condition even without using a specific reducing agent or applying a high thermal process. In this study, a process for converting graphene oxide into graphene was studied under supercritical fluid conditions in methanol and ethanol solvents. When the structure of asprepared graphene was analyzed by using FE-SEM and XRD, the reduction of graphene oxide in supercritical fluid condition was more affected by the change of solvent than other variables such as concentration of graphene oxide and reaction time. The use of ethanol showed better results for the reduction than the use of methanol. The graphene prepared in this study was mixed with epoxy resin up to 20 wt.% to make composites, and the thermal conductivity of the composites were analyzed. Thermal conductivity of the composite increased proportionally with graphene loadings. The graphene prepared in supercritical ethanol condition was more effective on the thermal conductivity of the composite.

• KIEAE Journal
• /
• v.17 no.2
• /
• pp.45-51
• /
• 2017

Purpose: Housing is the most essential element for well-being in a society. The government would continuously supply decent housings to make a better living condition for people. As various housing policies have been implemented into practice, the effectiveness of policies need to be assessed and improved to rearrange the financial resources. The indicators, such as quality of life, housing supply amount and etc, could be used to estimate housing policy to provide a guidance for a new policy direction. Though various indicators are utilized to assess the policy effect, most of the items are depend upon a relativeness in aspect to assessment goal, items, time and its weighting. Therefore, it needs an absolute indicator to compare the policy effectiveness regardless of time elapse or items. In this paper, it developed the housing welfare indicator to assess the level of living condition, utilizing the Gini coefficient which is used for explanation on income distribution. Method: To suggest an inequity indicator, this paper used Gini coefficient to explain the level of living condition which is used on economics to provide the level of income distribution. Data are collected through the Korea Housing Survey by Ministry of Land, Infrastructure and Transport between 2006 and 2014. Indicators of living condition focused on the development of the estimation model using the frequency of room use. Result: Gini coefficient between 2004 and 2014 is about 1.5 score except in year 2013, and the trend of score has been decreased slowly which means the inequality gradually improved. In this result, it implies the living condition and distribution level would be improved than before.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.87-93
• /
• 2018

The use of high-strength concrete in construction have been increasing steadily. However, high-strength concrete has a low water-binder ratio, and the problems such as cracks due to hydration heat and shrinkage during the hydration process at the early age. Recently, as a method to reduce the shrinkage of concrete, study of internal curing has carried out according to increasing about interest about it. In this study, the effect of compressive strength on the curing condition(drying, moist, water) was investigated by using artificial lightweight aggregate(LWA) in high strength and high volume mortar. As a result of autogenous shrinkage, the effect of shrinkage reduction was enhanced depending on the increasing of LWA replacement. According to the curing condition, the results of compressive strength showed the different trend. The compressive strength has increased on the drying and moisture condition and decreased on the water condition.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.609-618
• /
• 2013

Curve number (CN), originally developed, compiled by 'The Natural Resources Conservation Service (NRCS)', and has been widely used throughout the world. However, there is the uncertainty of CN derived from the use of antecedent moisture condition (AMC)/Antecedent Runoff Condition (ARC). As in Korea where nearly 70% covered by mountainous area, it is still not sufficient handbook precedent to guide or support the estimation of AMC/ARC. The failure to develop formal criteria of applying AMC/ ARC will be a gaping profession and results not only in uncertainty of CN estimation in particular, but also in designing appropriate structures in Korea as a whole. This paper is aiming at presenting a critical review of AMC/ARC and deriving a procedure to deal more realistically with event rainfall-runoff over wider variety of initial conditions. Proposed methods have been developed. It is based on modifying estimated runoff to observed runoff with coefficient of determination and then applying different algebraic expression with the verification of AMC by antecedent rainfall table of NEH-1964. The result shows that algebraic expression by Arnold et al. (1996) is the most appropriate for AMC/ARC and the results of AMC/ARC estimation criteria are generally very close to each other. Therefore, this algebraic expression might be applied in South Korea condition properly.