• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.245-254
• /
• 1993

본 연구에서는 탄소봉을 이장한 모형실험, 극한해석 상계법, 그리고 극한평형법을 이용한 Meyerhof 방법을 통하여 편심량이 줄기초에 미치는 영향을 연구하였다. 극한해석 상계법에 적용된 파괴메카니즘은 모형실험에서 구하여 사용하였다. 세가지 방법에 의한 결과들을 분석한 결과, 모형실험과 극한해석 상계법에 의한 결과는 편심량에 상관없이 잘 일치하지만, Meyerhof 방법은 지지력을 보수적으로 평가하고, 편심량의 증가에 따른 지지력의 감소효과도 과소평가한다. 아울러 기초너비, 근입깊이, 바닥면의 마찰 등을 변화시켜 각 요소들이 지지력에 미치는 효과를 연구하였다.

• 정보보호학회논문지
• /
• 제29권6호
• /
• pp.1259-1270
• /
• 2019

블록 암호를 설계할 때, 설계자는 주로 차분 특성 확률의 상한을 이용하여 라운드 수를 결정한다. 라운드 수는 블록 암호의 성능에 영향을 미치므로, 더 적은 라운드를 갖기 위해 차분 특성 확률의 상한을 정밀하게 계산하는 것이 중요하다. 이전까지의 활성 S-box의 최소 개수를 탐색하는 방법들은 비선형 연산과 선형 연산을 각각 제약식으로 구성하여 차분 특성 확률의 상한을 계산하였다. 하지만 선형 연산이 비선형 연산에 의존적으로 선택되는 BOGI 설계전략(Bad-Output Good-Input Design Strategy)의 경우 이전 탐색방법으로 구한 상한은 정밀하지 않을 수 있다. 본 논문에서는 BOGI 전략의 성질을 이용하여 기존의 방법보다 더 정밀한 차분 특성 확률의 상한을 구하는 새로운 방법을 제안한다. 그리고 이 방법을 이용하여 구한 상한의 타당성을 수학적으로 증명한다. 제안한 방법을 BOGI가 사용된 GIFT-64와 GIFT-128에 각각 적용하여 9라운드까지 차분 특성 확률의 상한을 탐색하였다. GIFT-64의 7라운드와 GIFT-128의 9라운드에 대해 기존의 방법을 적용하면 차분 특성 확률의 상한이 각각 2^-18.395와 2^-26.885이었으나, 제안한 방법을 적용하면 각각 2^-19.81과 2^-28.3으로 더 정밀하게 계산된다.

• 소성∙가공
• /
• 제10권4호
• /
• pp.302-310
• /
• 2001

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted inclined die surface connecting the die enterance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the twisting of die surface and the shear work is calculated by the consumption of shear energy. The increase rate of angular velocity is determined by the minimization of plastic work. The angular velocity of die exit can be controlled by the land length and the length of inclined die. The alular velocity assums to be increased linearly by the axial distance from the die enterance to the die exit. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction constant.

• 소성∙가공
• /
• 제8권4호
• /
• pp.364-373
• /
• 1999

For material characterization of semi-solid materials, backward extrusion process, which has been used in forming of hollow-sectioned products, was analyzed by the upper bound analysis in the current study. The existing kinematically admissible velocity field was applied to steady state at which there was no change in the assumed regions of velocity field. For unsteady state, new velocity field, as a function of dead zone angle, was proposed. Through the whole analysis, fiction between die and workpiece was also considered. It has been studied how the process variables, such as friction factor and punch velocity, and material parameters, such as strength coefficient, strain rate sensitivity could affect on analysis results. Finally, by the comparison with the finite element analysis, the reliability and efficiency of the proposed velocity field were discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.761-765
• /
• 1996

This paper describes the forging of circular tooth profiled gears as a series of development of simulator for non-axisymmetric parts that being used at the pump pulley, timing belt pulley etc. in automobiles. The half pitch of gear is divided into 6 deformation regious and kinematically admissible velocity fields for those regions are proposed. The neutral surface is introduced torepresent inner flow of material during forging operation with flat punch and, for each step, it is assumed as a circle. The upper bound solutions obtained from the suggested kinematically admissible velocity fields are in good agreement with experimental results and they are useful to predict the capacity of forging press for forging of circular gears.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.144-149
• /
• 1996

In this paper, the clamping type forging of helical gears has been investigated. Clamping type forging is an operation in which the product is constrained to extrude sideways through an orifice in the container wall. Punch is cylindrical shaped. The punch compresses a cylindrical billet placed in a die insert. As a consequence the material flows in a direction perpendicular to that of punch movement. The forging has been analysed by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, an involute curve has been introduced to represent tooth profile of the gear. Numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth, helix angle, friction factor and initial height of billet on the forging of helical gears.

• 소성∙가공
• /
• 제8권4호
• /
• pp.374-383
• /
• 1999

To determine the flow stress of semi-solid materials, a new combined method has been studied by experimental and analytic technique in the current approach. Using backward extrusion experiment and its numerical analysis, the characterization scheme of semi-solid materials according to the change of initial solid volume fraction has been proposed. Because that solid volume fraction is sensitive to temperature change, it is required to precisely control the temperature setting. Model materials can guarantee the establishment of material characterization technique from the noise due to temperature change. Thus, clay mixed with bonded abrasives was used for experiment and the change of initial solid fraction was copied out through the variation of mixing ratio. Upper bound method was adapted to increase in efficiency of the calculation in numerical analysis and new kinematically admissible velocity field was employed to improve the accuracy of numerical solution. It is thought that the material characterization scheme proposed in this study can be applied to not only semi-solid materials, but also other materials that is difficult to obtain the simple stress state.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.2074-2093
• /
• 2022

RSA is known as one of the best techniques for securing secret information across an unsecured network. The private key which is one of private parameters is the aim for attackers. However, it is exceedingly impossible to derive this value without disclosing all unknown parameters. In fact, many methods to recover the private key were proposed, the performance of each algorithm is acceptable for the different cases. For example, Wiener's attack is extremely efficient when the private key is very small. On the other hand, Fermat's factoring can quickly break RSA when the difference between two large prime factors of the modulus is relatively small. In general, if all private parameters are not disclosed, attackers will be able to confirm that the private key is unquestionably inside the scope [3, n - 2], where n is the modulus. However, this scope has already been reduced by increasing the greatest lower bound to [d_il, n - 2], where d_il ≥ 3. The aim of this paper is to decrease the least upper bound to narrow the scope that the private key will remain within this boundary. After finishing the proposed method, the new scope of the private key can be allocated as [d_il, d_ir], where d_ir ≤ n - 2. In fact, if the private key is extremely close to the new greatest lower bound, it can be retrieved quickly by performing a brute force attack, in which d_ir is decreased until it is equal to the private key. The experimental results indicate that the proposed method is extremely effective when the difference between prime factors is close to each other and one of two following requirement holds: the first condition is that the multiplier of Euler totient function is very close to the public key's small value whereas the second condition is that the public key should be large whenever the multiplier is far enough.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.85-94
• /
• 1992

This paper, discribes analysis of theree - dimensional extrusion with the use of dual stream functions, By this method admissible velocity fields for the extrusion of three- dimensional flow was newly derived kinematically. For square section the extrusion pressure was calculated by numerical solution program which was based on the upper bound analysis. The relationship between relative extrusion pressure and reduction of area, relative die length and constant friction factors were successfully calculated which was newly developed in this study. The results could be applied to design extrusion die.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.44.1-44
• /
• 2002

This paper is concerned with the problem of designing a guaranteed cost state feedback controller for singular systems with time-varying delays. The sufficient condition for the existence of a guaranteed cost controller, the controller design method, and the optimization problem to get the upper bound of guaranteed cost function are proposed by LMI(linear matrix inequality), singular value decomposition, Schur complements, and change of variables. Since the obtained sufficient conditions can be changed to LMI form, all solutions including controller gain and upper bound of guaranteed cost function can be obtained simultaneously.