• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.397-406
• /
• 2002

The purpose of this study was to clarify the palatal arch length, width and volume in the primary and permanent dentition. Samples were consisted of normal occlusion in the primary dentition(50 males and 50 females) and permanent dentition(43 males and 43 females). Their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve, loft surface and fit and horizontal plane were made for measuring the palatal arch length, width and volume(Surfacer 10.0, Imageware, U.S.A.). Correlation coefficients were calculated separately for males and females in each group(SPSS 10.0). The results were as follows : 1. Average distance from the fit plane to the points(tooth-tooth-palate) was greater in the permanent dentition than those of primary dentition. 2. Palatal volume was greater more than 3 times in the permanent dentition, especially it was greater in male compared to female with significance(p<0.05). 3. Palatal width of male was greater in the primary and permanent dentition but palatal length, only in the permanent dentition than that of female(P<0.05). 4. Correlation coefficients were statistically most significant between the palatal volume and size of posterior palatal width and total palatal length(r=0.401, r=0.450, r=0.678, r=0.654).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.1-9
• /
• 2009

Impact of daylighting on the visual environment can improve occupant's well-being by providing visual comfort. Also, daylighting can save energy. However, glare from window can be a direct hazard to vision and can cause serious discomfort. Selecting glare source on a window plane is very important for evaluating discomfort glare from windows. But former glare indices can not identify the range of the glare source properly. In this study, difference in glare sensation with uniform and non-uniform glare sources are evaluated to identify the range of the glare source. The glare source was assumed as $120{\times}120[cm]$ window model. The window was divided into three parts with different luminance values. The experiment was conducted under 1[m], 1.5[m], 3[m] distance from the glare source. Two results were obtained from the experiments. First, the degree of discomfort glare increased as average window luminance increased. Second, the middle and lower part of the window plane can affect evaluation of discomfort glare as well as the upper part of the window plan. These results can be used for selecting the glare source in a window with non-uniform luminance.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.695-698
• /
• 2011

Purpose: Since spinal tuberculosis is increasing in prevalence, it appears that a repair of spinal soft tissue defect as a complication of spinal tuberculosis can be a meaningful work. We report this convenient and practical reconstructive surgery which use bilateral latissimus dorsi musculocutaneous advancement flap. Methods: Before the operation, $13{\times}9.5$ cm sized skin and soft tissue defect was located on the dorsal part of a patient from T11 to L3. And dura was exposed on L2. Under the general endotrachel anesthesia, the patient was placed in prone position. After massive saline irrigation, dissection of the bilateral latissimus dorsi musculocutaneous flaps was begun just upper to the paraspinous muscles (at T11 level) by seperating the paraspinous muscles from overlying latissimus dorsi muscles. The plane between the paraspinous muscles fascia and the posterior edge of the latissimus dorsi muscle was ill-defined in the area of deformity, but it could be identified to find attachment of thoracolumbar fascia. The seperation between latissimus dorsi and external oblique muscle was identified, and submuscular plane of dissection was developed between the two muscles. The detachment from thoracolumbar fascia was done. These dissections was facilitated to advance the flap. The posterior perforating vasculature of the latissimus dorsi muscle was divided when encountered approximately 6 cm lateral to midline. Seperating the origin of the latissimus dorsi muscle from rib was done. The dissection was continued on the deep surface of the latissimus dorsi muscle until bilateral latissimus dorsi musculocutaneous flaps were enough to advance for closure. Once this dissection was completely bilateraly, the bipedicled erector spinae muscle was advanced to the midline and was repaired 3-0 nylon to cover the exposed vertebrae. And two musculocutaneous units were advanced to the midline for closure. Three 400 cc hemovacs were inserted beneath bilateral latissimus dorsi musculocutaneous flaps and above exposed vertebra. The flap was sutured with 3-0 & 4-0 nylon & 4-0 vicryl. Results: The patient was kept in prone and lateral position. Suture site was stitched out on POD14 without wound dehiscence. According to observative findings, suture site was stable on POD55 without wound problem. Conclusion: Bilateral latissimus dorsi musculocutaneous advancement flap was one of the useful methods in repairing of large spinal soft tissue defect resulting from spinal tuberculosis.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.88-97
• /
• 2015

An omnidirectional optical system can be described as a special optical system that images in real time a panoramic image with an azimuthal angle of $360^{\circ}$ and the altitude angle corresponding to the upper and lower fields of view from the horizon line. In this paper, for easy fabrication and compact size, we designed and fabricated a catadioptric omnidirectional optical system consisting of the mirror part of a spherical mirror with a central hole (that is, obscuration), a plane mirror, the imaging lens part of 3 single spherical lenses, and a spherical doublet in the visible light spectrum. We evaluated its image performance by measuring the cut-off spatial frequency using automobile license plates, and the vertical field of view using an ISO 12233 chart. We achieved a catadioptric omnidirectional optical system with vertical field of view from $+53^{\circ}$ to $-17^{\circ}$ and an azimuthal angle of $360^{\circ}$. This optical system cleaniy imaged letters on a car's front license plate at the object distance of 3 meters, which corresponds to a cut-off spatial frequency of 135 lp/mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.7-21
• /
• 1979

This investigation was to analyse normal protrusive and lateral condylar pantographic records written on the sagittal plane and to study components of Fisher's angle and their interrelations. The purpose of this study was limited to (1) discussing the significance of sagittal pantographic record in diagnosis of occlusal disease and(2) basing for reasoning validity of measuring Fisher's angle which has been reported so far. As a result followings were concluded. 1. In each protrusive and lateral condylar movement path, five complicate factors such as initial straightness, distributed simple sigmoid type, simple curvature, initial tiny protruding convexity and tiny repeated sigmoid patterns were noted. Generally each condylar movement path was composed of two to three of these factors. 2. The distribution of positional interrelations of protrusive and lateral condylar paths could be divided into five categories; (a) protrusive-upper, (b) completely coinciding, (c) partially initial coinciding, (d) partially inverted crossing, and (e) completely inverting. Among these, protrusive path-upper positioned condyles were prevailed (79.2%). 3. The distribution of interrelations of protrusive and lateral condylar paths could be devided into five categories according to their distances in the course of movement. Among these, opening (95.8%) and paralleling (66.7%) were prevailing. 4. The involved number of characteristic heterogenous patterns of five categories in protrusive and lateral condylar movement recording relations at one simultaneous recordings was limited to three. However, in case of homogeneous patterns were repeated, usually three to four were included. 5. The maximum distance between protrusive and lateral condylar paths was 1.45mm at the location of 4mm advanced position from centric relation point and 3.90mm at the location of protrusive movement terminal. 6. It seemed to be that ,pantographic records should be consulted other clinical symptoms in order to make certain occlusion diagnosis. 7. At the present moment of investigation, expressing Fisher's angle as a degree revealed a lack due to inherent complexity of protrusive and lateral condylar movement paths. 8. The typical pattern of protrusive and lateral condylar paths written on a pantographic sagittal plate might be described as follows; (a) protrusive condylar path should be positioned upwardly, (b) both mainly be simple curvature, (c) interrelations mainly be opening or paralleling. 9. The mean amounts of separation between protrusive and lateral condylar movement path were $0.75{\pm}0.46$ at 4mm advanced location from centric relation and $1.74{\pm}0.64mm$ at the location of protrusive path terminal.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.775-790
• /
• 2008

This study shows possibility of active fault, throughout analyzing distributional features of tectonic and fluvial geomorphology and mineral composition of fault fracture clay, at Jinbu fault-line system in Pyeongchang-gun, Gangwon Province. Fault-line valley was formed remarkably in the upper reaches of Odae River and upper reaches of Yeongok River according along Jinbu fault-line. Landforms show rectilineal distribution at right shore slopes of Odae River in Ganpyeong-ri, southern zone of Jinbu fault-line system, related to the tectonic processes, such as triangular facet, kernbut, kerncol and alluvial fan. Fault fracture clay zones were developed at 5 outcrops($jbf1{\sim}5$), located in kerncol. Particularly, jbf1 fault outcrop, developed at granite saprolite, has obvious fault plane and fault clay composed of illite and laumontite. The Jinbu Fault-line along jbf4-2-3-5 may be formed by regional compressive stress, and jbf1 fault may be suggested a tributary fault of the Jinbu fault-line formed before the late Pleistocene. The vertical displacement of the east and west blocks of the Jinbu Fault-line is estimated in $0.024{\sim}0.027m/ka$.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.99-108
• /
• 2000

This study was performed to investigate the effect of suboccipital stretch on the head and neck posture and the electromyographic(EMG) activity of some cervical muscles. For this study, 39 patients with temporomandibular disorders(TMD) and 34 dental students without any signs and symptoms in the masticatory system were selected as the patients group and as the normal group, respectively. Head position by goniometer CROM$^{(R)}$(Performance attainment, St. Paul, USA), EMG activity by BioEMG$^{(R)}$(Bioresearch Inc., Milwaukee, USA), and craniocervical posture by cephaloradiography were observed in both natural head posture(NHP) and head posture with suboccipital stretch(tuck posture) abtained from slight posteroinferior finger pressure on the chin. Variables measured on the cephaloradiograph were SN angle, atlas angle, CVT angle, occiput-atlas and atlas-axis distance, and pharyngeal width. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In the sagittal plane, degree of anterior rotation of the head by suboccipital stretch was 6.3 in the patients group, and 6.2 in the normal group, respectively. So there was no significant difference between the two groups for degree of anterior rotation, but the position of the head in the patients group were more posteriorly extended than in the normal group in both NHP and tuck posture. 2. EMG activity of the stemocleidomastoideus in the patients group, and that of the upper trapezius and the sternocleidomastoideus in the normal group were increased by suboccipital stretch. The range of EMG activity, however, in these cervical muscles were 1.6 -2.3)u.V. 3. Cephalometric variables such as SN angle, atlas angle, CVT angle, occiput-atlas and atlas-axis distance except pharyngeal width were generally increased by suboccipital stretch. There was some difference, however, in results between the two groups. Atlas angle was not changed in the patients group whereas CVT angle was not changed in the normal group. 4. The distance from subocciput to spinous process of axis was significantly increased as much as 3.0mm in the patients group, and 3.7mm in the normal group by suboccipital stretch.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.455-474
• /
• 1993

Degenerative joint disease(DJD) has hun known as one of the diseases which affect the middleor old-aged people. But as orthodontists are getting interested in the adult orthodontics, it is not rare for them to meet the open-bite patients with the TMJ DJD in their clinics. The purpose of this article is to investigate the cephalometric characteristics of the open-bite cases with TMJ DJD. Twelve TMJ DJD patients($15.1\~39.5$ years old) were selected from the patients who visited Department of Orthodontics, Seoul National University Hospital. Cephalograms were taken and means from 60 measurements were compared by t-test with those of the fifty four healthy adults($20.0\~26.7$ years old) who have normal occlusion and TMJ. In this study male and female are compared respectively, for in the normal samples 26 measurements showed significant differences between the male and the female. The results and conclusions axe as follows: 1 In DJD group, ANB and Angle of convexity decreased, which means the retruding of the mandible. The interincisal angle was smaller than that of the normal group. The means of the overbite were -2.1mm in male and -3.0mm in female, and the means of the overjet were 5.6mm in male and 6.7mm in female. The profile was similar to that of Angle's Class II div.1 open-bite. 2. SN-GoMe and FMA increased in DJD but SN-PP and FH-PP did not show any significant difference. In TMJ DJD open-bite cases, the bony structure lower than the palatal plane seemed to play an important role in developing open-bite. 3. In DJD group, PH-ArGo, SArGo and Y-sxis angle increased significantly, but genial angle showed no significant difference. The means of hか were 50.1mm in male and 40.2mm in female, which were significantly smaller than those of the normal(56.5mm in male, 50.9mm in female). These findings seemed to indicate the posterior rotation of mandible resulted from the shortening of the ramus height. 4. Anterior faical height(AFH), upper anterior facial height(UAFH) and lower anterior facial height (LAEH) of DJD showed no significant increase as compared with those of the noraml group. There was no significant difference in the ratio of upper anterior facial height to lower anterior facial height(UAFH/LAFH). But, lower posterior facial height(LPFH) was significantly smaller than that of the normal group. 5. It was thought that the peculiar profile of the TMJ DJD open-bite was resulted from the posterior rotation of mandible as the ramus became short following the degerative destruction of of the condylar head and neck.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.420-432
• /
• 2005

Bolton analysis is widely used to predict tooth size discrepancy. but its accuracy has been challenged. The purpose of this study was to describe true anterior tooth size discrepancies among orthodontic patients and to evaluate the factors that affect true anterior tooth size discrepancies. The subjects consisted of 80 patients with varying malocclusions (Class I. Class II. Class III. and Class III surgery) who were treated orthodontically. Pre-treatment models. set-up models from post-treatment models. and lateral cephalometric radiographs were analyzed The results were as follows. The means. the standard deviations. and ranges of anterior Bolton ratio in the present study were somewhat higher than those of Bolton's samples and Korean normal samples. The number of patients showing maxillary deficiency was larger than that of patients showing maxillary excess in view of true anterior discrepancies. There was a significant difference between anterior Bolton discrepancy from pre-treatment models and true anterior discrepancy from set-up models (p < 0.05) There was no significant difference in true anterior discrepancies among malocclusion groups (p > 0.05). And there was also no significant difference between the male and female groups (p> 0.05). Overbite and the incisal edge thickness of maxillary anterior teeth have little relationship with true anterior discrepancies. Multiple regression analysis showed that true anterior discrepancy was mainly determined by anterior Bolton ratio, upper incisor to occlusal plane angle after treatment. interincisal angle after treatment. and upper right lateral incisor width.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.390-396
• /
• 2012

Infraocclusion is defined as tooth whose relative occlusal movement was blocked during the period of active eruption due to ankylosis and so on. Then infraoccluded tooth remains under the occlusal plane composed by adjacent structures showing normal eruption patterns. Untreated infraocclusion may cause: prolonged retention of infraoccluded teeth; extrusion of apposed teeth; destruction of periodontal tissues by occlusal force and food packing; increased sensitivity for dental caries; and disturbances on eruption pathway of succedaneous teeth. Therefore, periodic check-ups and proper treatments are required. There are many treatment options on infraoccluded deciduous molars such as periodic observation, conservative method, restoration and space regaining with extraction of the teeth. The choice of treatment may depend on the presence of succedaneous teeth, time of diagnosis and degree of infraocclusion. In this case report, three patients showing displacement of the second premolars due to infraocclusion of upper second primary molars, were treated by means of space regaining with removable orthodontic appliances and extraction of ankylosed primary molars. All malpositioned permanent premolars in the 3 cases showed ordinary eruption pathways after treatment.