• 한국의류학회지
• /
• 제28권2호
• /
• pp.262-269
• /
• 2004

The purpose of this study is to identify the effect of perceptions of somatotype on the satisfaction of somatotype and the clothing behavior. The respondents included 201 female student volunteers, aged 19 to 27, who were enrolled at university in Busan. The questionnaire was composed of three sections; perceived somatotype-self, satisfaction of somatotype and clothing behavior. Data were analyzed by frequency, factor analysis, and regression analysis. This study established the factors(the lower half the body, the upper half of the body, height, body-shape)as the perception of somatotype. In the clothing behavior, this study drew the 3 factor(aesthetics, fit, utility). The result of regression analysis reveals that the perceptions of somatotype-self are major determinant to influence on the satisfaction of somatotype. But the perceptions of somatotype-self are major determinant to influence on the aesthetic factor among three factors.

• 대한인간공학회지
• /
• 제15권1호
• /
• pp.119-132
• /
• 1996

The objectives of this study are to investigate the measurements of clothing for the handicapped compared to that of the normal, and to present the basic data to make clothing for the handicapped who has specific needs. Questionnaires were administered to 927 Cerebral Palsies on height, weight, chest circumference, sitting height, and to 70 handicapped people using a supporting parasite on 18 measurement items. The results show that height, weight , and sitting height of the handicapped are smaller than those of the normal of equal age except for chest circumference. And, the values of the items for the lower half are smaller than the normal of equal age and those for the upper half, especially the items for the shoulder and arm, are greater. Compared to the values of the normal in the three standad size charts, the size charts using height and chest circumference are unsuitable to the handicapped, and the size chart using hip circumference is approximately suitable.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.775-783
• /
• 2019

The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. In this context, Finite Element Method (FEM) based software called ANSYS and ABAQUS are used. It is assumed that the elastic layers have different elastic constants and heights and the external load is applied to the upper elastic layer by means of a rigid stamp. The problem is solved under the assumptions that the contact between two elastic layers, and between the rigid stamp are frictionless, the effect of gravity force is neglected. To validate the constructed model and obtained results a comparison is performed with the analytical results in literature. The numerical results for normal stresses and shear stresses are obtained for various parameters of load, material and geometry and are tabulated and illustrated.

• Animal Systematics, Evolution and Diversity
• /
• 제40권1호
• /
• pp.112-114
• /
• 2024

We report one newly recorded species Warreniplema fumicosta (Warren) for the first time in Korea. In July, a single female specimen of Warreniplema fumicosta was collected at a high altitude on Mount Jirisan. This species can be distinguished by the light blackish forewing with the largely undulating ante- and postmedial lines, and the bicolorous hindwing with yellowish upper half dark brown lower half, and dark brown ante- and postmedial lines. So far, there have been 13 species belonging to seven genera of the Epipleminae subfamily that have been documented, and this includes W. fumicosta.

• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.199-204
• /
• 2017

A compact dual-band half-ring-shaped (HRS) bent slot antenna fed by a coplanar waveguide for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is presented. The antenna consists of two HRS slots with different lengths and widths. The two HRS slots are connected through an arc-shaped slit, and the upper HRS slot is bent in order to reduce the size of the antenna. The optimized dual-band HRS bent slot antenna operating in the 2.45 GHz WLAN and 3.5 GHz WiMAX bands is fabricated on an FR4 substrate with dimensions of 30 mm by 30 mm. The slot length of the proposed dual-band slot antenna is reduced by 35%, compared to a conventional dual-band rectangular slot antenna. Experimental results show that the proposed antenna operates in the frequency bands of 2.40-2.49 GHz and 3.39-3.72 GHz for a voltage standing wave ratio of less than 2, and measured gain is larger than 1.4 dBi in the two bands.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.473-486
• /
• 2023

A through-railway bridge with an inclined girder has recently been applied to optimize the cross-section of a slender bridge structure in railway bridges. To achieve the additional cross-section optimization effect by the bolted end-plate connection, it is necessary to investigate the application of the bolted end-plate tension connection between the inclined girder and the crossbeam. This basic study was conducted on the application of the bolted end-plate moment connection of crossbeams to half-through girders with inclined webs. The combined behavior of vertical deflection and rotational behavior was observed due to the effect of the web inclination in the inclined girder where the steel crossbeam was connected to the girder by the bolted end-plate moment connection. Therefore, in the experiment, the deflection of the inclined girder was 1.77-2.93 times greater than that of the vertical girder but the lateral deflection of the inclined girder was 0.4 times less than that of the vertical girder. Moreover, the tensile stress of the upper bolts in the inclined girder with low crossbeams was clearly 0.81 times lower than that of the vertical girder. According to the results, the design formula for vertical girders does not reflect the influence of the web inclination. Therefore, this study proposed the design procedures for the inclined girder to apply the bolted end-plate moment connection of the crossbeam to the inclined girder by reflecting the design change factors according to the effect of the web inclination.

• 대한수학회지
• /
• 제55권5호
• /
• pp.1019-1030
• /
• 2018

In [12,13] the researchers introduced universally convex, universally starlike and universally prestarlike functions in the slit domain ${\mathbb{C}}{\backslash}[1,{\infty})$. These papers extended the corresponding notions from the unit disc to other discs and half-planes containing the origin. In this paper, we introduce universally prestarlike generalized functions of order ${\alpha}$ with ${\alpha}{\leq}1$ and we obtain upper bounds of the second Hankel determinant ${\mid}a_2a_4-a^2_3{\mid}$ for such functions.

• Fisheries and Aquatic Sciences
• /
• 제18권3호
• /
• pp.297-300
• /
• 2015

This is the first report of Champsodon longipinnis (Champsodontidae) collected from Korea. The specimen (100.9 mm in standard length) was caught by a bottom trawl in the coastal waters off Busan, Korea. This species is characterized by the following morphological traits: body with small denticulate scales except abdomen around pelvic fin base; posterior end of maxilla extending beyond margin of eye; dark pigmentation on most of the first dorsal fin, upper half of the first to the fourth soft ray of the second dorsal fin, and partial upper lobe of caudal fin. We add C. longipinnis to the Korean fish fauna and suggest a new Korean name, "Jeom-ak-eo-chi," for the species.

• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.142-148
• /
• 1997

In this paper, forging of internal triangular and involute serrations are analyzed by upper bound method. Kinematically admissible velocity fields for half pitch of the serration were proposed. It was assumed that the shape flow surface during forging is a straight line perpendicular to plane of symmetry. Using the suggested velocity fields, forging loads and relative pressures were calculated by numerical method. Experiments were carride out with commercial AI 2024 aluminium alloy. As a result, the calculated solutions are good agreement with experimental results, so it is useful to predict the loads for forging of internal serrations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권5호
• /
• pp.412-417
• /
• 2016

A fin of finite width with infinitely small thickness is assumed to be placed horizontally between two horizontal parallel plates of infinite extension in the exactly central position. The lower plate and the half of the upper plate are kept at a constant lower temperature, and the remaining upper plate is kept at a constant higher temperature. The fin is also kept at a constant temperature (variable). Steady-state two-dimensional laminar natural convection is analyzed as a problem of boundary value under a boundary-fitted conformal mapping system, using a spectral finite difference scheme, with a condition of doubly-connectedness. The steady-state solution is obtained as a limit of the transient solution.