• 산업공학
• /
• 제13권4호
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.672-681
• /
• 2004

Direct numerical simulation was carried out to study the vortical structures of the flow around a wall-mounted cube in a channel at Re=1,000 and Re=3,500 based on cubic height and bulk mean velocity. The cubic obstacle is situated in the entrance region of the channel flow where the boundary layers are developing. Upstream of the obstacle, steady and unsteady laminar horseshoe vortex systems are observed at Re=1,000 and Re=3,500, respectively; the near-wake flow is turbulent in both cases. The flow separates at each leading sharp edge of the cube, and subsequent vortex roll-up is noticed in the corresponding free-shear layer. The vortex shedding from the upper leading edge (upper vortices) and that from the two lateral leading edges (lateral vortices) are both quasi-periodic and their frequencies are computed. The upper and lateral vortices further develop into hairpin and Λ vortices, respectively. A series of instantaneous contours of the second invariant of velocity gradient tensor helps us identify spatial and temporal behaviors of the vortices in detail. The results indicate that the length and time scales of the vortical structures at Re=3,500 are much shorter than those at Re:1,000. Correlations between the upper and lateral vortices are also reported.

• Journal of applied mathematics & informatics
• /
• 제34권3_4호
• /
• pp.319-330
• /
• 2016

The hyper-Zagreb index HM(G) of a simple graph G is defined as the sum of the terms (d_u+d_v)² over all edges uv of G, where d_u denotes the degree of the vertex u of G. In this paper, we present several upper and lower bounds on the hyper-Zagreb index in terms of some molecular structural parameters and relate this index to various well-known molecular descriptors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.623-628
• /
• 2000

In this paper, the behavior for transfer girder of the upper-wall and lower-frame structures was studied by the nonlinear finite element analysis. It was analyzed and compared with the experimental results. Analysis results showed that failure modes were progressed by a initial diagonal crack in the shear span between the edges of the load and intermediate support plate. The nonlinear finite element analysis could predict deformation, principal stress, ultimate load and concrete crack. Also analysis results showed good agreement the test results.

• 한국경영과학회지
• /
• 제26권3호
• /
• pp.65-77
• /
• 2001

Survivability of a network is one of the most important issues in designing present-day communication networks. the k-edge survivability of a given network is defined as the percentage of total traffic surviving the worst case failure of k edges. Although several researches calculated k-edge survivability on small networks by enumeration, prior research has considered how to calculate k-edge survivability on large networks. In this paper, we develop an efficient procedure to obtain lower and upper bounds on the k-edge survivability of a network.

• 대한치과교정학회지
• /
• 제32권3호
• /
• pp.165-174
• /
• 2002

본 연구의 목적은 상하악 제 1소구치를 발거하고, 6전치 일괄(en masse)견인과, 견치 견인 후 4전치 견인 시, 구치부의 고정원 소실과 전치부의 후방이동량, 치축변화량, 전치부와 구치부의 수직적변화에 대해 비교하는 것이다. 만 17세 이상의 성인 여자이며, 1급 구치 관계이고, 상하악 밀생(crowding)이 각각 4mm이하인 전돌(protrusion) 환자이며, 상하악 제 1소구치를 발거하고 .022" straight wire appliance로 치료하였으며, TPA를 사용하지 않았고, head gear와 같은 구외고정원을 사용하지 않은 총 30명의 환자를 대상으로 하였다. 그중 6전치 일괄(on masse) 견인을 시행한 제 1군 15명과 견치 견인 후4전치 견인을 시행한 제 2군 15명에 대해, 치료전후의 두부방사선 계측사진을 투사하여 비교 분석하였다. 각 군에 대한 치료 전 후의 변화를 independent samples t-test를 이용하여 통계처리 하였으며, 다음과 같은 결론을 얻었다. 1. 두 군에서 구치부의 고정원 소실량에는 차이가 없었다. 2. 두 군에서 전치부의 후방이동량에는 차이가 없었다. 3. 두 군에서 전치부의 치축변화량은 제 2군에서 다소 컸다. 4. 두 군에서 전치부 절단연의 수직적 변화는, 제 2군에서 약 1mm 정도의 정출이 더 나타났다. 5. 두 군에서 전치부 치근첨과 구치부의 수직적 변화에는 차이가 없었다.

• 대한수학회보
• /
• 제59권1호
• /
• pp.167-177
• /
• 2022

A vertex v of a graph G = (V, E) is said to ve-dominate every edge incident to v, as well as every edge adjacent to these incident edges. A set S ⊆ V is called a double vertex-edge dominating set if every edge of E is ve-dominated by at least two vertices of S. The minimum cardinality of a double vertex-edge dominating set of G is the double vertex-edge domination number γ_dve(G). In this paper, we provide an upper bound on the double vertex-edge domination number of trees in terms of the order n, the number of leaves and support vertices, and we characterize the trees attaining the upper bound. Finally, we design a polynomial time algorithm for computing the value of γ_dve(T) for any trees. This gives an answer of an open problem posed in [4].

• 한국강구조학회 논문집
• /
• 제10권3호통권36호
• /
• pp.393-406
• /
• 1998

본 연구는 수평보강된 직교이방성판의 좌굴거동에 관한 것으로서 면내 선형분포하중을 받는 수평보강된 직교이방성판의 좌굴해석식을 Rayleigh-Ritz법을 사용하여 유도하였으며 보강재의 위치에 따른 좌굴응력의 상한치를 Lagrangian multiplier법을 사용하여 결정하였다. 판의 네 변은 단순지지되어 있다고 가정하였으며, 보강재는 보요소로 간주하였다. 유도된 식을 사용하여 보강재와 판의 폭비와 보강재의 위치를 변화시켜가며 좌굴해석을 수행한 결과 면내 선형분포하중을 받는 네 변이 단순지지된 수평보강된 직교이방성판의 효과적인 보강재의 설치 위치는 판의 좌굴응력의 상한치가 최대가 되는 위치임을 알 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.646-660
• /
• 2017

This study provides basic data to develop a brassiere pattern that can cover the big breast of breast enlargement patients. In this study, we also showed areas of the brassiere cup pattern and the body surface of the breast on a breast enlargement patient. The results of the study are as follows. Correlation analysis was obtained between volume and body surface area and breast detail dimensions. After the correction process, we proposed a research bra pattern for breast augmentation patients. The cup-boundary in bra patterns of breast enlargement surgery patients is longer than the bra patterns of the general breast; therefore, the height of the inner and outer edges of the upper cups is higher. Also, it is necessary to set the new breast upper point when measuring the upper length in patients with breast augmentation surgery because the points of circumference of the breast are marked higher than chest circumference.