• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.6
• /
• pp.114-126
• /
• 2001

The purpose of this study is to establish the databases of pollutant sources and water quality measurement data by utilizing GIS, and making the user interface for the management of pollutant sources. Yeongsan Estuarine Lake was formed of a huge levee of 4.35 km constructed by an agricultural reclamation project. Water quality of the reservoir has been degraded gradually, which mainly attributes to increase of point and non-point source pollutant loads from the lake's watershed of 33,374.3 $\textrm{km}^2$ into it. Application of GIS to establishment of the database was researched of pint source such as domestic sewage, industrial wastewater, farm wastes, and fishery wastes, and non-pont source such as residence, rice and upland field, and forest runoffs of the watershed of the lake. NT Acr/Info and ArcView were mainly utilized for the database formation. Land use of the watershed using LANDSAT image data was analyzed for non-point source pollutant load estimation. Pollutant loads from the watershed into the reservoir were calculated using the GIS database and BOD, TN, TP load units of point and non-point sources. Total BOD, TN, TP loads into it reached approximately to 141, 715, 2,094 and 4,743 kg/day respectively. The loads can be used as input parameters for water quality predicting model of it. A user-friendly interface program was developed using Dialog Designer and Avenue Script of AcrView, which can perform spatial analysis of point and non-point sources, calculate pollutant inputs from the sources, update attribute data of them, delete and add point sources, identify locations and volumes of water treatment facilities, and examine water quality data of water sampling points.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.1
• /
• pp.54-67
• /
• 1997

Korean societies have been experiencing the wholesale structural changes in the rapid currents of recent openness, globalization and democratization, which effect much more heavily in rural areas than in urban areas, so rural recomposition works being an important national concern. In order to systematically reconstruct the rural structure, the decision makers, with a four step hierarchy of rural resident-residents group-community-region, should be endowed with the objective judgement on basic elements of resource potentialities under their control. In this process. rational resource evaluation works would be firstly necessiated from expert groups. Based on the view mentioned above, this study principally aimed at developing a rational evaluation framework for rural resources. For that objective, the first step of the study pigeonholed the total resources items identifiable in rural areas from the existing study results, spatial planning and field surveying data. After then, using the formalized classification criteria of resources items, a tentative goal system for rural resources evaluation was proposed and the final one determined through expert-group checking. The results obtained during the study are summarized as follows ; 1. Using the existing examples of resources identification/classification and the basic data list for county-level development planning as the principal reference ones, total rural resources elements were classified into 3 constituent units : land, natural environment and human resources, which correspond to places to work, to play and to live, respectively, as 3 constituent ones of life-supporting space. 2. Three characteristic areal types were adopted to represent the total rural areas : lowland, upland and seashore areas, and also 3 practical use types to represent the objectives of resources evaluation systems : for land use planning, natural conservation policy and village improvement planning. Thus 9 different types of goal system for resources evaluation were developed(each system by 3 areal typesX3 practical use types) 3. Each goal system has 3-tier classification steps from the higher, middle and lower one. The higher and middle steps should contain equally applicable components to all the rural areas, of which allowable number being around 3 and 4 respectively. However the lower step would contain detailed sub-components changeable to areal characteristics of which allowable number being around 7.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.219-224
• /
• 2010

This study was carried out to develop the breeding and cultivation of Allium grayi by investigating its natural habitats in Korea. The number of sunny, half-shady, and shady natural habitats were 194 (64.0%), 96 (31.7%), and 13 (4.3%), respectively. Natural habitats included upland (51.2%), Buddhist temple (18.8%), mountain (11.6%), roadside (7.9%), river (5.9%), paddy field (2.3%), and seashore (2.3%). Natural habitats ranged widely in all areas between $33^{\circ}N{\sim}38^{\circ}N$ and $126^{\circ}E{\sim}130^{\circ}E$. Self-generation patterns included growing spontaneously with a 1~10m distance between plants, and there were 3~5 bulbils around each bulb. The sprout stage began in September and continued until March of next year in natural habitats. The bolting period was May, with the following three patterns: tuber (59.2%), flower and tuber (24.7%), and flower (16.1%).

• The Plant Pathology Journal
• /
• v.21 no.1
• /
• pp.77-82
• /
• 2005

A summer annual weed of monochoria (Monochoria vaginalis) grows in the edges of rice paddies, ditches, and moist upland throughout Korea. It is very difficult to control with herbicide because of its sulfonylurea resistance. It is very competitive with fast growing pattern, that can cause reducing yields of rice. Brown leaf blight of monochoria (Monochoria vaginalis) occurred naturally in rice paddy, is first reported in Korea. The fungal isolate BWC01-54 was successfully isolated from the diseased leaves of monochoria. The fungus BWC 01-54 was grown well at $25-28^{\circ}C$, conidia of the greysh black brown mycelia were abundant produced on PDA at 15 days. The fungus was grown well in potato dextrose broth at $28^{\circ}C$ and fully grown within 10 days in 250 ml of flask. In host and pathogenicity test, conidia suspension of BWC01-54 was the most effective to control of monochoria compare to others isolates. Typical symptoms having pin point brown lesions were formed on stem and leaf and which severely affected the whole plants ware blighted within two weeks, respectively. Under paddies field condition, conidial suspension of the fungus BWC01-54 gave around 90% control. Therefore, we conclude that the fungus may have a potential as a biological control agent against sulfonylurea resistance weed in rice paddy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.73-78
• /
• 2005

Demand for the domestic hairy vetch seed production will be increased with the increasing interest of environment-friendly agriculture in Korea. This study was conducted during from 2000 fall to 2003 spring at upland field of National Institute of Crop Science in Suwon, Korea to compare wheat and triticale (TC) as stake crop of hairy vetch (HV), and to know proper seeding rates and ratios between TC and HV for the maximum HV seed production. As supporting crop of HV, TC was superior to wheat at the points of higher HV seed yield, stronger TC stalk for supporting, consistence of ripening stage of two seeds. In seeding method, row seeding was superior to broadcast seeding at the points of less lodging and higher HV seed yield. HV seed yield decreased with the increase of TC seeding rate in mixture cropping (row seeding), particularly at TC seeding rates over 5kg/10a. HV seed yield increased with the increase of HV seeding rate at the condition of TC seeding rates under 5kg/10a in spite of higher lodging of mixed crops at higher HV seeding rate due to higher HV aboveground dry matter. Maximum HV seed yield was obtained at TC seeding rate of $1\~1.5kg/10a$ as indicating HV seed yield 176kg/l0a (CV. Madison) at seeding rate of TC 1kg/10a + HV 2 kg/10a in 2001, and HV seed yield 96kg/10a (CV. Common) at seeding rate of TC 1.5kg/10a + HV 4.5kg/10a in 2003. Use of all-purpose combine harvester for harvesting and appliance for separation of mixed seeds using centrifugal force, which are prerequisite for HV seed production, was excellent in the simultaneous seeds production system of HV and TC.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.153-160
• /
• 2016

Purpose: This study was conducted to experimentally investigate the structural safety of and identify critical locations in a front-end loader under impact loads. Methods: Impact and static tests were conducted on a commonly used front-end loader mounted on a tractor. In the impact test, the bucket of the front-end loader with maximum live load was raised to its maximum lift height and was allowed to free fall to a height of 500 mm above the ground where it was stopped abruptly. For the static test, the bucket with maximum live load was raised and held at the maximum lift height, median height, and a height of 500 mm from the ground. Strain gages were attached at twenty-three main locations on the front-end loader, and the maximum stresses and strains were measured during respective impact and static tests. Results: Stresses and strains at the same location on the loader were higher in the impact test than in the static test, for most of measurement locations. This indicated that the front-end loader was put under a severe environment during impact loading. The safety factors for stresses were higher than 1.0 at all locations during impact and static tests. Conclusions: Since the lowest safety factor was higher than 1.0, the front-end loader was considered as structurally safe under impact loads. However, caution must be exercised at the locations having relatively low safety factors because failure may occur at these locations under high impact loads. These important design locations were identified to be the bucket link elements and the connection elements between the tractor frame and front-end loader. A robust design is required for these elements because of their high failure probability caused by excessive impact stress.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.749-758
• /
• 2004

Nitrous oxide ($N_2$O) has been known as an important trace gas due to the greenhouse gas and the major source of stratospheric oxide of nitrogen (NO). Soil is the major source of $N_2$O in nature. The physicochemical characteristics of soils affect the emission of $N_2$O from soil. These physicochemical parameters are soil moisture, soil temperature, and soil N content. Since these parameters are correlated to the flux of $N_2$O from soil individually and compositely, there still remain many unknowns in the mechanism to produce $N_2$O in soil and the roles of such physicochemical parameters which affect the soil $N_2$O emission. Soil $N_2$O fluxes were measured at different levels in water filled pore space (WFPS), soil temperature and soil N contents from the same amounts of soils which were sampled from agriculturally managed upland field in a depth of ～30 cm at Kunsan. The soil $N_2$O flux measurements were conducted in a laboratory with a closed flux chamber system. The optimum soil moisture and soil temperature were observed at 60% of WFPS and ～13$^{\circ}C$. The soil $N_2$O flux increased as soil N contents increases during the whole experimental hours (up to 48 hours). However, average $N_2$O flux decreased after ～30 hours when organic carbon was mixed with nitrogen in the sample soils. It is suggested that organic carbon could be important for the emission of $N_2$O, and that the ratio of N to C needs to be identified in the process of $N_2$O soil emission.

• Plant Disease and Agriculture
• /
• v.5 no.2
• /
• pp.77-83
• /
• 1999

In 1997 surveys 82 out of 180 crucifer fields were infected with clubroot disease in a range of 1-100% of diseased plants and among crucifier crops Chinese cabbage was the most severe, In cropping systems Chinese cabbage-monocropping of Chinese cabbage-radish were found to be most common in major Chinese cabbage production areas. Welsh onion squash or paddy rice were also planted between cropping of Chinese cabbage. Paddy fields converted to upland were lowered in incidence of clubroot disease and fields with loam to silty loam soil were more severe in disease than those with sandy soil. Soil pH and organic contents were nor related to clubroot disease severity. Soil fauua such as total fungi bacteria actinomyces Pseudomonads and Bascillus were not correlated with severity of the disease. Root rall development on Chinese cabbage seedlings was initifially observed under a microscope 13 days after inoculation with Plasmodiophora brassicae but 18 days by naked eyes after inoculation. Root galls were formed mostly around collar roots and gradually spread to main root lateral roots and secondary root branches. Root galls started to enlarge greatly in size and weight from 23 days after inoculation. Chinese cabbage plants at mid-growth stage with root gall development were reduced to 1/2 of that of healthy plants in number of leaves 1/4-1/5 in above ground fresh weight 1/6 in root length but increased to 3 times in diameter of collar root. Diseased plants had little root hairs. Diseased Chinese cabbage plants at harvest were reduced by 9,1-11.8% in head weight compared to healthy plants a positive correlation was observed between root and head weight but those relationships were rot found in the diseased plants.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.3-12
• /
• 2004

The need to predict the rate of soil erosion, both under existing conditions and those expected to occur following soil conservation practice, has been led to the development of various models. In this study Morgan model especially developed for field-sized areas on hill slopes was applied to assess the rate of soil erosion using RS/GIS environment in the Dukchun river basin, one of two tributaries flowing into Jinyang lake. In order to run the model, land cover mapping was made by the supervised classification method with Landsat TM satellite image data, the digital soil map was generated from scanning and screen digitizing from the hard copy of soil maps, digital elevation map (DEM) in order to generate the slope map was made by the digital map (DM) produced by National Geographic Information Institute (NGII). Almost all model parameters were generated to the multiple raster data layers, and the map calculation was made by the raster based GIS software, IL WIS which was developed by ITC, the Netherlands. Model results show that the annual soil loss rates are 5.2, 18.4, 30.3, 58.2 and 60.2 ton/ha/year in forest, paddy fields, built-up area, bare soil, and upland fields respectively. The estimated rates seemed to be high under the normal climatic conditions because of exaggerated land slopes due to DEM generation using 100 m contour interval. However, the results were worthwhile to estimate soil loss in hilly areas and the more precise result could be expected when the more accurate slope data is available.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.482-490
• /
• 2015

In this study, considering the factors that affects sediment trapping efficiency of Vegetative Filter Strips (VFS), the scenarios were designed to develop a regression equation to estimate sediment trapping efficiency of VFS for agricultural fields in South-Korea. For this, general conditions of agricultural fields in South-Korea were investigated. Then, based on these results, total 53,460 scenarios were set and simulated by Vegetative Filter Strip MODel (VFSMOD-w). Two variables were determined from the results of 53,460 scenarios. These two variables were applied to CurveExpert for development of a equation, which can estimate sediment trapping efficiency of VFS. The equation developed in this study can be used in SWAT model for estimation of sediment reduction efficiency of VFS to upland field in Korea. Moreover, it is expected that VFS will be effectively applied to agricultural fields in South-Korea.