• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.63-72
• /
• 2013

Recent trends in rail industry can be characterized by the multifunctionality and very high-speed modes of operations. In particular, the adoption of the unmaned or operatorless operations has been getting increased attention in which case ensuring systems safety is crucial. On the other hand, according to the result of analyzing rail accidents, the human/operator errors have turned out to be one of the key causes of the accidents. Therefore, the effort of improving the work environment of locomotive cabs is quite necessary in order to decrease the accidents. The objective of this paper is studying on how to incorporate the factors related to the train operators in the design of the locomotive cabs and also on how to evaluate the design results obtained, which is subsequently reflected in the generation of the test and evaluation procedure. The approach taken is based on systems engineering, yielding the procedure document as a result. The results obtained in the paper can be useful in confirming the design of locomotive cabs utilizing the domestic human/operator measure. Also, the way of achieving the objectives can be utilized to cover the expanded rail systems development with appropriate design activities added.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.76-81
• /
• 2019

It becomes easy to acquire operating qualification of remote control tower crane and illegal retrofits is increased, remote control tower crane models are increasingly being used in smaller construction sites. However, as the problems caused by tower crane operators who have shortages of operating experience grow, safety accidents is increasing and worker is exposed to risk of accident. In this study, the cause of the accident was derived by analyzing the cause of the remote control tower crane accident. And then, the significance of accident causes was analyzed by AHP technique. The result of this study is that tower crane operators and construction workers do not comply with work rules.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.862-870
• /
• 2016

AIS and V-PASS, which are used for safe navigation and automatic vessel arrival and departure, are mandatory standard equipment installed on all ships. If an aircraft is equipped with a ship identification system using AIS and V-PASS, and then ship identification information is received by a vessel such as a large fishery inspection boat or a patrol ship or a ground control system, we can quickly perform maritime surveillance and disaster response. This paper describes the development of a ship identification and display system using a ship identification device for aircraft. Flight test results and a future application plan are also included.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.418-421
• /
• 2007

It is important to maintain information by application or 3D modeling through the satellite and UAV image which is a real world. The prevention business has recognized the need for accurate 3-D geospatial information around the disaster region to identify objects to 3D modeling. In this paper, we presented an approach to create 3D model and loading, processing the image using GIS techniques, and the digital topographic maps were used for the DEM and the features of the area. The result is a implementation of the simple application that illustrates the objects in 3-D. The presented approach will be used for identifying objects and assisting in regional planning around the airfields.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1315-1318
• /
• 2003

Wastewater treatment processes are usually located in the outskirts of cities. But these processes should be dealt with continuous maintenance by expert operators. Therefore, in this paper, unmaned and automated control system is designed for the SBR(Sequencing Batch Reactor) plant. This plant is constructed in Gimhae city. Networks and wireless modules are employed for the data transmission. A local controller is in the SBR plant as a client and a monitoring system is located in the other place as a server. Remote control and monitoring system are constructed at the laboratory of ours. Measured data from plant sensors are translated to the remote site using communication modules, and then the data could be displayed and analyzed by means of remote monitoring and control systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.861-866
• /
• 2015

This study was aimed to detect area of Submaine Groundwater Discharged(: SGD) around Jeju island using by remote sensing. Sea Surface Temperature(SST) was identified using IR camera on Unmaned Aerial Vehicle(UAV) at Gimnyeong port in study area. Then SGD location was detected by comparing range of SGD temperature. Generally, range of SGD temperature is distributed 15 to 17 like underground water. The result, SGD location was detected by SST distribution of Gimnyeong port recorded by IR camera in the southwest of study area.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.56-59
• /
• 2001

In this paper, unmaned fully automation systems are applied for the CSTR(Continuously Stirred Tank Reactor) and, SBR (Sequencing Batch Reactor) wastewater treatment pilot plant. This plant is constructed in the country side which is little far from a main city. So networks and wireless modules are employed for the data transmission. The SBR plant has a local control and monitoring system which is contained communication parts which consist of one ADSL (Asymmetric Digital Subscriber Line) network and one CDMA (Code Division Multiple Access) module. Remote control and monitoring systems are constructed at a laboratory in a metropolis.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1179-1184
• /
• 2007

An unmaned surveillance robot consists of rifle, laser receiver, thermal imager, color CCD camera, and laser illuminator. A human guard can be replaced with such a robot to take care dangerous surveillance tasks. Currently most of surveillance robots are mounded at a fixed post to take care of surveillance tasks. In order to watch blind areas, it is necessary to modify such a surveillance robot to become a mobile robot. In this paper, simulation based design procedure of mobile surveillance robot has been introduced. 3D CAD geometry model has been produced using Pro-Engineer. Required pen and tilt motor capacities have been analyzed using ADAMS inverse dynamics analysis. A target tracking and stabilization control algorithm of the mobile surveillance robot has been developed in order to stabilize the system from the motion of the vehicle which experiences the rough terrain. ADAMS-Matlab co-simulation has been also carried out to validate the proposed target tracking and stabilization algorithm.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2015

Unmaned Aerial Vehical(UAV) is a flight which is automatically flying by remote control on th ground. However UAV has an advantage of control that is easy, but has an disadvantage of not hovering. By comparison, quadcopter which is one of the UAV is easily operated. Also quadcopter has hovering function and high stability. In this paper, we propose stable flight algorithm associated PID(proportional-integral-derivative) control with fuzzy contorl to implement stable quadcopter system. After getting a positioning information of the drone, This proposed system is implemented for stable flight through flight attitude control using gyro and acceleration sensor. We also propose the flight mode system to hover drone with GPS sensor.