• 지질공학
• /
• 제23권4호
• /
• pp.341-352
• /
• 2013

본 연구에서는 생성 당시의 퇴적환경이 상이한 것으로 알려진 대구지역의 적색 셰일과 흑색 셰일의 물리적 및 역학적 특성을 확인하기 위하여 단위중량, 흡수율, 공극률, 초음파속도, 일축압축강도, 점하중강도, 슬레이크 내구성 및 열화특성 시험 등을 실시하였고, XRD 및 XRF 분석과 SEM 영상 분석을 수행하였다. 시험결과 두 셰일의 단위중량은 유사하였으나 흡수율과 공극률은 적색 셰일이 흑색 셰일보다 더 높았다. 특이하게도 공극률이 높은 적색 셰일의 초음파속도, 일축압축강도, 점하중강도지수 가 흑색보다 더 높은 값을 보였는데 이는 흑색 셰일 내에 발달된 엽층리의 영향인 것으로 판단된다. 열화시험에서는 용액의 산성도가 증가할수록 또 수침시간이 길어질수록 시료의 점하중강도지수와 슬레이크 내구성지수의 저감정도가 심하였으며, 흑색 셰일보다는 공극률이 큰 적색 셰일에서 더 크게 영향을 받는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제34권4호
• /
• pp.1117-1123
• /
• 2014

물은 인류와 동식물의 필요조건으로, 물 부족 상태 즉 가뭄은 전 세계적으로 가장 두려워하는 재해 중 하나이다. 본 연구는 지역적인 특성을 고려하여 가뭄을 판단하고 대응하기 위해 목표재현기간을 설정하고 한반도 전역을 대상으로 시 군 구 단위의 지역별 목표 표준강수지수를 산정하였다. 먼저 한반도에 위치한 30년 이상의 자료기간을 보유한 88개 기상관측소의 강우자료에서 월별강우자료를 추출하고 SPI (3)가뭄지수를 산정하였다. 산정된 SPI (3)에서 연도별 최저치를 추출하여 매개변수적 빈도해석과 경계핵밀도 함수를 이용한 비매개변수적 빈도해석을 실시하였다. 또한, 목표재현기간을 30년으로 설정하고 비매개변수적 빈도해석 결과에 티센비 적용하여 시 군 구 단위로 목표 표준강수지수를 산정하였다. 분석결과 가뭄의 심도와 빈도가 지역별로 크게 다르게 나타남을 확인 할 수 있었으며, 이는 한반도 가뭄의 판단과 대응을 위한 기초자료로 국가적인 수자원계획과 방재대책에 기여하고자 한다.

• 응용통계연구
• /
• 제33권5호
• /
• pp.639-653
• /
• 2020

COVID-19 대유행, 미·중 무역분쟁, 글로벌 금융위기 등 대내외 환경변화에 따른 경제불확실성이 증가하고 있다. 경제불확실성은 경제 전반의 성장을 지연·제약하고 있어 정책 수행과 경제분석에서 경제불확실성을 측정하는 것이 중요하다. Baker 등 (2016) 등은 주요 언론사의 기사의 키워드를 분석하여 우리나라를 포함한 주요국의 경제불확실성(economic policy uncertainty) 지수를 산출하여 공개하고 있다. 그런데 Baker 등의 우리나라 경제불확실성 지수는 키워드 선정, 기사 수집 방법, 대상 언론사의 선정 등에 있어 우리나라 상황을 충분히 반영하지 못하고 있다. 이 논문에서는 우리나라 상황에 맞게 우리나라 경제불확실성 지수를 수정·보완하여 작성하고, 그 유용성을 거시경제 통계와의 관련성, 예측력과 경제분석 측면에서 비교·검증하였다.

• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.855-862
• /
• 2017

대한민국은 지난 반세기간 성장위주의 정책을 통하여서 경제적, 문화적, 사회적으로 급속한 발전을 이루었다. 하지만 거점개발방식으로 인하여서 비대한 도시와 낙후된 지역이 생겼다. 이에 따라서 국가에서는 많은 낙후지역 개발정책들을 펼쳐왔으나 많은 문제점들을 가졌다. 그 이유는 소관 부처가 많고 사업의 종류가 다양함으로 인해 나타난다. 또한 개발 우선순위가 객관적인 지표에 근거하지 않고 각 지자체에 분배 식으로 사업이 수행되는 형태이기 때문이다. 기존의 연구된 지역에 대한 지표연구는 도 또는 시, 군등 대단위에서만 분석되어있고 소단위 지역의 사업의 순서를 선정하는데 어려움을 가진다. 이에 따라서 지역에 대한 지표선정을 통해 소규모 낙후지역의 효율적인 개발을 위한 의사결정 지원 시스템로 사용하고자 한다.

• 환경영향평가
• /
• 제20권3호
• /
• pp.367-379
• /
• 2011

This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

• 대한원격탐사학회지
• /
• 제20권3호
• /
• pp.175-188
• /
• 2004

The objectives of this study were to estimate leaf area index (LAI) as a function of image-derived vegetation indices, and to compare measured and estimated LAI to the results of crop model simulation. Soil moisture, crop phenology, and LAI data were obtained several times during the 2001 growing season at monitoring sites established in two central Missouri experimental fields, one planted to com (Zea mays L.) and the other planted to soybean (Glycine max L.). Hyper- and multi-spectral images at varying spatial. and spectral resolutions were acquired from both airborne and satellite platforms, and data were extracted to calculate standard vegetative indices (normalized difference vegetative index, NDVI; ratio vegetative index, RVI; and soil-adjusted vegetative index, SAVI). When comparing these three indices, regressions for measured LAI were of similar quality $(r^2$ =0.59 to 0.61 for com; $r^2$ =0.66 to 0.68 for soybean) in this single-year dataset. CERES(Crop Environment Resource Synthesis)-Maize and CROPGRO-Soybean models were calibrated to measured soil moisture and yield data and used to simulate LAI over the growing season. The CERES-Maize model over-predicted LAI at all corn monitoring sites. Simulated LAI from CROPGRO-Soybean was similar to observed and image-estimated LA! for most soybean monitoring sites. These results suggest crop growth model predictions might be improved by incorporating image-estimated LAI. Greater improvements might be expected with com than with soybean.

• 한국병원경영학회지
• /
• 제26권4호
• /
• pp.51-58
• /
• 2021

Purpose: This study is based on the results of previous studies that falls, which is a frequent social problem, causes physical, mental and social health problems in the elderly. In order to identify risk factors for falls in the elderly, this study derives a relationship with oral health and proposes the necessity of oral health care as part of countermeasures to prevent falls in the elderly. Methodology: The final 6,936 people were analysed using the 2018 Korean Longitudinal Study of Ageing(KLoSA) survey data, and the analysis was conducted using the multiple logistic and multiple regression analysis to investigate the relationship between Geriatric Oral Health Assessment Index (GOHAI) and falls experience. Findings: As a result of the analysis in this study, the number of falls experiences and whether or not falls were higher in the elderly female group than in the male group. The likelihood of falls experience has been statistically reduced as Geriatric Oral Health Assessment Index increases by one unit.(OR : 0.991) The number of falls has also been statistically reduced as Geriatric Oral Health Assessment Index increase by one unit.(B : -0.001) Practical Implications: The results of this study, which showed that higher Geriatric Oral Health Assessment Index was lower risk of falls, explained by the connection that oral health may affect nutritional intake, which leads to sarcopenia and physical loss, which in turn increases the risk of falls. As a way to solve the fall problem, efforts should be made to improve the oral health of the elderly, and furthermore, the importance of nutrition management thorugh oral health care of the elderly is increasd.

• 통상정보연구
• /
• 제12권4호
• /
• pp.171-192
• /
• 2010

In general, a stock index and its individual stocks are assumed to follow a random walk. A stock index is an important source of information and one that is seen by people everyday, regardless of their investment intentions. This paper examines the correlation between the KOSPI-the index that best reflects the Korean stock market and the macro - economic variables that have been found to influence the index by previous studies. The sample period considers the years after 2000 when the Korean stock market matured as restrictions on foreign investors were removed. For this purpose, a Vector Error Correction Model (VECM) and KOSPI equation with a general pacific approach were used. This paper aims at verifying the factors that determined the KOSPI after 2000 and at examining whether there was structural change in the investment environment. It also investigates changes in the factors determining the KOSPI's performance as a result of structural changes in the investment environment. The V AR (Vector Autoregressive) model including the nine variables was selected as a baseline model whose stability was tested using the unit root test. The results from the VECM and the structural changes in the investment environment can be summarized by the following Inner story points.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.96-100
• /
• 2014

Purpose: The objective of this study was to develop a classification index and the grade levels for a five-grade energy efficiency classification of agricultural dryers in Korea. Methods: The classification index and the grade levels were determined by using the performance test data published by the FACT over the last eight years to reflect a state of the art technology for agricultural dryers in Korea. The five grades were designed to have the classified dryers distributed normally over the grades with 15% for the $1^{st}$ grade, 20% for the $2^{nd}$ grade, 30% for the $3^{rd}$ grade, 20% for the $4^{th}$ grade and 15% for the $5^{th}$ grade. Results: The classification index was defined as the total amount of fuel and electrical energy consumed per 1% of the wet basis moisture content evaporated from a unit mass of grain or agricultural crops during the drying process: 1 MT of paddy rice for grain dryers and 1 kg of red pepper for agricultural crop dryers as the standard mass. Conclusions: The grade levels for the five-grade energy efficiency classification of grain dryers, kerosene dryers, and electric dryers were proposed in terms of the classification index value.

• 한국정밀공학회지
• /
• 제32권2호
• /
• pp.179-184
• /
• 2015

In the recent field of Machining, with the improving efficiency of processing, the index table is a key unit according to the increase of parts in available processing when working with the three axes at the same time. As an essential product of MCT, the index tables effect an influence on product quality of machined parts. Therefore, it is necessary to design the shape of index table with stability, high stiffness, lightweight structure. In this study, the optimal shape of index table was proposed using by design of experiment. The maximum displacement and stress analysis were carried out by using FEM software. The optimized shape was verified by using the statistical software. The results of shape optimization were confirmed that both displacement and stress were reduced in comparison with initial model.