유사한 문서를 비교하는 방법으로는 지문법과 서열 정렬법이 널리 알려져 있다. 지문법은 계산속도가 빠른 대신 정확도가 떨어지며, 서열정렬법은 계산속도가 느린 대신 정확도가 높다. 다단계 정렬은 두 방법의 비중을 조절하여 문서 유사도를 비교할 수 있는 새로운 방법의 문서 유사도 측정 방법으로, 각 방법의 장점을 얻으면서 동시에 단점을 보완하도록 고안되었다. 특히 두 비교 방법의 비중을 "블록크기"라는 단일 변수를 이용하여 조절할 수 있도록 한 것이 제안 시스템의 핵심이다. 다단계 정렬은 문서를 일정한 길이의 블록으로 나누어 지문을 추출하고 블록간의 유사도를 계산한 다음 그 결과를 서열정렬법으로 다시 한 번 탐색하는 과정을 거친다. 이때 문서가 분할되는 과정에서 유사구간이 두 개 이상의 블록으로 나누어지는 현상이 발생하기도 한다. 이 논문에서는 다단계 정렬방법에 대해 설명하고, 유사도 비교 성능 개선을 위한 단편화 제거 기법과 휴리스틱 비교법에 대해 설명하고 실험적으로 그 결과를 보인다.
지문인식은 융선과 골로 이루어진 지문 정보를 이용하여 개인의 신원을 식별하는 바이오인식 기술이다. 대부분의 지문인식 시스템들은 접촉식 센서를 이용하여 지문 영상을 획득한 후, 지문의 특징점을 검출하여 인식을 수행한다. 접촉식 지문 인식은 센서와 지문과의 접촉으러 인해 동일한 표기의 선명한 영상을 얻을 수 있는 장점을 지닌다. 하지만, 사용자의 손가락과 센서의 접촉 입력 차이에 의해 상당히 건조한 지문이나 습한 지문의 경우 지문 영상의 품질이 떨어질 수 있는 가능성이 있고, 센서에 남아있는 잔존 지문 정보로부터 사용자의 지문이 유출될 수 있는 문제점이 있다. 이를 해결하기 위해 비접촉식 지문인식 장비들이 제안되고 있지만 비접촉식으로 지문 영상을 취득할 경우, 조명 변화에 의해 영상의 품질이 훼손되어 지문 특징점 오검출 증가와 함께 인식률 감소의 문제가 발생된다. 따라서 본 논문에서는 조명 변화에 강인한 LDP(Local Derivative Pattern) 기반의 비접촉식 지문인식 방법을 제안한다. LDP 방법을 기반으로 지문의 융선과 골이 반복되는 특정 패턴을 효율적으로 추출하였으며, 추출된 특정코드에 대한 히스토그램을 구성한 후 카이 제곱 거리를 측정하여 최종적으로 개인의 신원을 식별하였다. 실험 결과, 제안하는 LDP 기반의 비접촉식 지문인식 방법은 기존의 LBP 기반의 방법보다 EER(Equal Error Rate)이 0.521% 만큼 감소하였다.
본 연구는 미세유체 장치를 통해 제조가 이루어진 펙틴 하이드로겔 입자의 수거 방법을 다르게 하였을 때 각 방법에 따른 하이드로겔의 물리적 특성을 비교한 것이다. 펙틴 하이드로겔 입자는 미세유체 채널 내에서 미네랄 오일에 분산된 칼슘 이온에 의해 겔화되고 이후 각각 파이펫팅법, 튜브법, 침전법을 통해 수거하였다. 각 방법으로 수거된 펙틴 하이드로겔 입자의 단분산성을 분석한 결과 침전법의 변동 계수(Coefficient of variation)는 3.46으로 파이펫팅법(18.60)과 튜브법(14.76)의 변동 계수보다 월등히 낮아 가장 우수한 단분산성 하이드로겔 입자를 만들 수 있었다. 상기 침전법을 이용한 조건에서 분산상과 연속상의 부피유속 및 펙틴 용액의 점도를 조절함으로써 $30{\mu}m$에서 $180{\mu}m$까지의 다양한 크기를 갖는 단분산성 펙틴 하이드로겔을 제조할 수 있었다. 본 논문에서 제시한 펙틴 하이드로겔 입자는 생체 물질을 손쉽게 함입할 수 있으므로 이는 향후 약물전달, 식품, 그리고 생체적합성 재료 등으로 활용 가능할 것으로 기대된다.
우리는 수피를 사용 후 폐기되는 닥나무 목질부를 표고재배의 원료로 사용함으로써 실제 사용 가치를 높이기 위해 이 연구를 수행하였다. 닥나무 톱밥과 참나무 톱밥의 혼합 비율에 따라 1.2 kg의 기둥형 배지를 5가지 조건으로 제작하였다. 두 가지 균주(NIFoS 2462, 2778)를 접종하여 암배양 90일, 명배양 40일을 실시하였다. 배양이 끝난 뒤, $18^{\circ}C$, 습도 85% 이상의 조건에서 발생작업을 실시하였다. 각 발생 기간 사이에는 2주간의 휴양기간을 두었다. 1차 발생과정에서 버섯발생의 밀도가 높아, 개체의 크기가 작은 버섯들이 수확되었다. 닥나무 톱밥과 참나무 톱밥(상수리나무 1:신갈나무 1) 혼합비가 3:1일 때 가장 높은 생산성을 나타내었다. 특히, NIFoS 2462는 닥나무 톱밥의 혼합비율이 높을수록 생산성이 높다는 것을 보여 주었다. NIFoS 2778은 닥나무가 혼합된 배지에서 버섯의 크기가 유사하였다. 반면에 NIFoS 2462는 닥나무 톱밥과 참나무 톱밥이 혼합된 배지에서 중량이 감소하였으나, 다른 특성에서는 큰 차이가 나타나지는 않았다. 닥나무 톱밥은 표고 버섯 재배에 사용될 수 있으며 참나무 톱밥을 일부 대체할 수 있는 가능성을 보여 주었다. 그리고 폐기 된 부산물의 이용 가치를 높이는 결과라고 생각되며 연구를 계속할 가치가 있다고 생각된다.
본 연구에서는 대청댐 하류 구간에서 증가방류에 의한 유사의 이송 및 하상토의 변화 특성을 분석하였다. 증가방류에 의해 하상토의 평균입경은 증가하고, 표준편차는 작아지며, 입경분포는 균등하게 변하였다. 혼합사로 구성된 하상토의 표층은 굵은 자갈로 형성되었고, 저층은 모래로 구성되었으며, 유사의 수직분급이 발생하였다. 유사의 거동은 소류사 형태로 이동하였다. 혼합사의 거동을 파악하기 위해서 유사 채집상자에 포착된 유사의 통과중량 백분율에 대한 상대입경비(D$_i$/D$_{50}$)를 분석한 결과, 현도지점에서 상대입경비는 D$_{50}$ 보다 큰 경우에 약 1.0으로 거의 일정하게 유지되고 있으며, 부강 지점에서 상대입경비는 증가방류 전과 후의 중간에 있었다. 현도수위표에서 하상토의 입경에 대하여 개별입자에 대한 작용력과 저항력의 비($\tau_i^*$)는 D$_{50}$ 보다 큰 경우에 일정하게 유지되었으며, 부강수위표에서는 크게 감소하였다. 이것은 댐 직하류에서 장갑화 현상이 부강수위표보다 크게 되었다는 것을 의미하며, 증가방류에 의해 입경이 균일하게 이송하는 것을 알 수 있다.
본 연구에서는 다양한 생리활성을 가지고 있는 클로렐라의 기능성식품소재로의 산업적 이용 증대를 위해 추출조건에 따른 항산화 활성 및 총 엽록소 함량을 조사하였고 엽록소의 안정성 향상을 위해 분무건조 분말을 제조하여 물리화학적 특성을 확인하였다. 추출조건에 따른 DPPH 및 superoxide radicle 소거활성은 50% 에탄올 추출물에서 각각 29.19% 및 48.91%로 가장 높은 활성을 나타내었으며, ORAC은 50% 에탄올 추출물에서 g당 $150.44{\mu}M$로 가장 높은 값을 나타내었다. 총 엽록소 함량은 50% 에탄올 추출물에서 100 g당 542.89 mg으로 가장 높은 함량을 나타내었다. 입자크기는 분무건조 분말에서 $24.15{\sim}32.49{\mu}m$로 동결건조 분말의 $454.47{\mu}m$ 보다 작았으며, 표면구조는 전반적으로 구형을 나타내었으나, 말토덱스트린이 첨가량이 증가함에 따라 표면 굴곡이 증가함을 확인하였다. 수분흡수지수는 분무건조 분말에서 0.31~0.45로 동결건조 분말 0.85에 비해 낮은 흡수지수를 나타내었으며, 수분용해지수는 분무건조 분말에서 96.96~98.28%로 동결건조 분말의 80.03%보다 높게 나타났다. 분무건조 분말의 저장 안정성은 총 엽록소 함량의 감소율로 확인하였는데, 15.67~20.31% 감소하여 동결건조 분말보다 우수하였다. 따라서 클로렐라 추출물 제조에 50% 에탄올을 용매로 사용하였을 때, 항산화 활성 및 엽록소 함량이 우수하였으며 클로렐라 추출물에 말토덱스트린을 첨가한 분무건조 분말에서 엽록소의 안정성이 증가하였다. 특히 총 엽록소 함량 및 가공비용 등을 고려하였을 때 말토덱스트린 10% 첨가량이 산업적으로 적용가능하다 판단된다.
천연색소를 함유한 유색식물체 분말(울금, 복분자, 백련초, 홍피망, 녹차, 단호박, 뽕잎)과 찹쌀분말에 1, 3, 5% 첨가하여 호화시켜 L. lactis 젖산균으로 배양한 약초부각용 발효 찹쌀풀의 품질특성을 조사하였다. 총당과 환원당은 젖산균으로 발효시킨 발효찹쌀풀이 대조구인 생찹쌀풀에 비하여 높은 경향이었다. 총산도는 유색식물체 분말농도를 증가시킨 젖산균 발효풀에서 점진적으로 증가되었는데, 단호박($1.02{\sim}1.56%$), 홍피망($0.96{\sim}1.87%$)에서 $3{\sim}4$배 크게 나타났다. 점도는 젖산균으로 발효시킨 찹쌀풀에서 모든 비발효 찹쌀풀에 비하여 아주 낮은 값을 나타내었는데, 울금과 백년초의 분말을 이용한 비발효풀의 점도는 $100{\sim}160{\times}10^4mPa{\cdot}s$ 범위로 매우 높은 값을 나타내었으나, 복분자와 녹차는 $40{\times}10^4mPa{\cdot}s$ 이하로 낮은 값을 나타내었다. 색차계 색도의 명도(L)는 대조구인 비발효 찹쌀풀에 비하여 발효찹쌀풀은 약간씩 감소되었고, 황색도(b)는 울금과 단호박이 가장 높았으며 젖산균 발효에 따라서 대부분의 색소분말은 황색도가 약간씩 증가하였다. 그리고 복분자 분말을 첨가하여 발효시킨 찹쌀풀은 대조구에 비하여 기공의 형태가 일정하며 기공의 수가 많았다. 발효약초부각은 시판되는 해조류 부각보다 부드럽고 형태와 색상이 개선된 잠재적 기능성부각으로 판단된다.
한국정보디스플레이학회 2008년도 International Meeting on Information Display
/
pp.1261-1262
/
2008
Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.
Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.
Floating zone법에 의한 $SrTiO_{3}$ 단결정 성장에 있어서 원료봉의 미세구조가 원료봉과 융액간의 고액계면의 형상 및 용융대의 안정성에 미치는 영향을 광학현미경 및 전자현미경을 이용하여 조사하였다. $1400,\;1500,\;1600^{\circ}C$로 소결온도를 변화시키면서 소결한 $SrTiO_{3}$ 및 $Fe_{2}O_{3}$를 0.2 wt% 첨가한 $SrTiO_{3}$ 원료봉을 실험시편으로 사용하였다. 저온($1400^{\circ}C$)에서 소결한 경우는 치밀화가 덜 진행되어 존재하는 기공들이 균일한 용융대 형성을 저해하였고, 고온($1600^{\circ}C$)의 경우는 미세구조는 치밀하나 이상입자성장 현상으로 안정된 용융대 형성에 어려움을 주었음을 실험적으로 확인하였다. 따라서 이상입자성장을 하지 않은 즉, 균일한 결정입 크기 분포를 갖는 원료봉을 사용하여 결정성장을 하였을때 원료봉의 균일한 용융양상을 유도할 수 있었고 안정한 용융대 유지가 가능하여 결정성장에 가장 적합함을 알게 되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.