• 제목/요약/키워드: uniform performance

검색결과 1,539건 처리시간 0.033초

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

정보보호 대책의 성능을 고려한 투자 포트폴리오의 게임 이론적 최적화 (Game Theoretic Optimization of Investment Portfolio Considering the Performance of Information Security Countermeasure)

  • 이상훈;김태성
    • 지능정보연구
    • /
    • 제26권3호
    • /
    • pp.37-50
    • /
    • 2020
  • 사물 인터넷, 빅데이터, 클라우드, 인공지능 등 다양한 정보통신기술이 발전하면서, 정보보호의 대상이 증가하고있다. 정보통신기술의 발전에 비례해서 정보보호의 필요성이 확대되고 있지만, 정보보호 투자에 대한 관심은 저조한 상황이다. 일반적으로 정보보호와 관련된 투자는 효과를 측정하기 어렵기 때문에 적절한 투자가 이루어지지 않고 있으며, 대부분의 조직은 투자 규모를 줄이고 있다. 또한 정보보호 대책의 종류와 특성이 다양하기 때문에 객관적인 비교와 평가가 힘들고, 객관적인 의사결정 방법이 부족한 실정이다. 하지만 조직의 발전을 위해서는 정보보호와 관련된 정책과 의사결정이 필수적이며 적정 수준의 투자와 이에 대한 투자 효과를 측정 할 필요가 있다. 이에 본 연구에서는 게임 이론을 이용하여 정보보호 대책 투자 포트폴리오를 구성하는 방법을 제안하고 선형계획법을 이용하여 최적 방어 확률을 도출한다. 2인 게임 모형을 이용하여 정보보호 담당자와 공격자를 게임의 경기자로 구성한 뒤, 정보보호 대책을 정보보호 담당자의 전략으로, 정보보호 위협을 공격자의 전략으로 각각 설정한다. 게임 모형은 경기자의 보수의 합이 0인 제로섬 게임을 가정하고, 여러개의 전략 사이에서 일정한 확률 분포에 따라 전략을 선택하는 혼합 전략 게임의 해를 도출한다. 여러 종류의 위협이 존재하는 현실에서는 한 개의 정보보호 대책만으로 일정 수준 이상의 방어가 힘들기 때문에, 다수의 정보보호 대책을 고려해야한다. 따라서 다수의 정보보호 위협에 따른 정보보호 대책이 배치된 환경에서 정보보호 대책의 방어 비율을 이용하여 정보보호 대책 투자 포트폴리오를 산출한다. 또한 최적화된 포트폴리오를 이용하여 방어 확률을 최대화하는 게임 값을 도출한다. 마지막으로 정보보호 대책의 실제 성능 데이터를 이용하여 수치 예제를 구성하고, 제안한 게임 모델을 적용하고 평가한다. 본 연구에서 제시한 최적화 모델을 이용하면 조직의 정보보호 담당자는 정보보호 대책의 방어 비율을 고려하여 정보보호 대책의 투자 가중치를 구할 수 있고, 효과적인 투자 포트폴리오를 구성하여 최적의 방어 확률을 도출 할 수 있을 것이다.

한국우주전파관측망(KVN)의 영상모의실험 (IMAGING SIMULATIONS FOR THE KOREAN VLBI NETWORK(KVN))

  • 정태현;이명현;노덕규;김현구;손봉원
    • Journal of Astronomy and Space Sciences
    • /
    • 제22권1호
    • /
    • pp.1-12
    • /
    • 2005
  • 한국우주전파관측망(Korean VLBI Network: KVN)은 우리나라 최초의 초장기선 전파간섭계로 새로운 천문우주 연구 분야 및 측지, 지구물리 등의 연구를 위하여 3기의 21m 최첨단 밀리미터파 전파 안테나를 이용하여 우주를 바라보는 새로운 영역을 개척할 예정이다. 전파간섭계의 성능은 안테나 배열 및 관측 대상 천체의 적위, 그리고 천체와 크기 및 형태에 따른 의존성이 매우 크다. 본 연구는 현재 설정되어있는 KVN관측소 및 시스템 자료를 근거로 단일 점광원, 다중 점광원, 원형광원 2개, Cygnus A의 5개 모델 영상에 대하여 가상관측을 수행하였다. 적위에 따른 KVN의 UV 궤적 분포로부터 가장 이상적이라고 여겨지는 적위 60도인 천체에 대하여 22GHz의 관측 파장으로 12시간 동안 가상관측을 수행하여 얻어진 UV데이터를 가지고 간섭계 표준 영상처리를 하였다. 그 결과 22GHz에서 예상되는 KVN의 빔 크기에 의해 분해가 되지 않는 모델들의 RMS 대비 최대밝기 강도(Jy/Beam)가 대략 점광원의 징우 l0000:1, 지름 6mas(milli arcsecond) 원형 광원의 경우 5000:1 정도로 매우 높은 반면, 빔 크기보다 큰 모델에서는 115:1 및 34:1정도로 현저하게 감소하였으며 영상의 복원 정도도 이와 같은 결과를 보였다. 이것은 KVN이 상대적으로 적은 기선의 개수로 인하여 UV평면을 충분히 채우지 못하며, 동시에 짧은 기선이 부족하여 넓은 분포를 가지는 천체들에 대한 영상화능력이 떨어지기 때문이다. 그러나 각 모델과 CLEAN 영상과의 픽셀 좌표비교에서는 12mas 원형광원을 제외하고는 정확하게 일치함을 보였다. 그러므로 KVN의 주요한 관측 대상은 콤팩트한 천체들이 적당할 것이며, 이러한 천체들에 대하여 KVN은 위치측정에 우수한 성능을 보였다.

상수, 공업용수, 및 하천수를 활용한 균일한 실리카 나노입자 합성 및 전기감응형 스마트유체로의 응용 (Synthesis of Uniform Silica Nanoparticles using Tap, Industrial, and Stream water and Their Application to Electro-responsive Smart Fluid System)

  • 김하영;제갈석;이능히;사민기;김동현;김민상;김지원;윤창민
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.47-56
    • /
    • 2023
  • 본 연구에서는 증류수를 사용하지 않고 상수, 공업용수 및 하천수를 활용하여 균일한 실리카 나노입자를 성공적으로 제조하는 방법에 대해 제시하였다. 또한, 제조된 실리카 나노입자들은 전기감응형 스마트유체의 분산 물질로 적용하였다. 상세히는, 다양한 종류의 물을 사용하여 500-700nm 사이즈의 실리카 나노입자를 한 번의 실험으로 대량 제조(약 12.0g) 하였으며 증류수를 활용하여 합성한 750nm 사이즈의 실리카 나노입자와 동일한 형태학적 화학적 특성을 가지고 있음을 확인하였다. 다양한 물을 사용하여 제조한 실리카 나노입자의 사이즈는 이온전도도에 따라 변화하였다. 이온전도도가 높으면 높을수록 제조된 실리카 나노입자의 크기가 작아짐을 확인할 수 있었고, 이는 이온들이 실리카 나노입자의 성장을 억제하기 때문이다. 또한, 제조한 실리카 나노입자들을 전기감응형 스마트유체로 응용하였다. 그 결과, 상수, 공업용수 및 하천수를 활용하여 제조한 실리카 나노입자가 증류수를 활용하여 합성한 실리카 나노입자 대비 높은 전단응력을 나타냄을 확인할 수 있었고, 이는 작은 사이즈의 실리카 나노입자가 전기장 하에서 더 강한 사슬 구조를 형성하기 때문이다. 결론적으로, 본 연구를 통해 다양한 물을 증류수와 같이 정제하지 않고 사용하여 실리카 나노입자를 성공적으로 제조할 수 있음을 확인하였고, 해당 입자들이 전기감응형 스마트유체 응용에서 우수한 성능을 나타냄을 확인할 수 있었다.

방향성매매를 위한 지능형 매매시스템의 투자성과분석 (Analysis of Trading Performance on Intelligent Trading System for Directional Trading)

  • 최흥식;김선웅;박성철
    • 지능정보연구
    • /
    • 제17권3호
    • /
    • pp.187-201
    • /
    • 2011
  • 방향성(Direction)과 변동성(Volatility)에 대한 분석은 증권투자를 위한 시장분석의 기초가 된다. 변동성분석이 옵션 투자에서 중요하다면 주식이나 주가지수선물투자는 방향성분석에 의하여 투자성과가 결정된다. 기존의 금융분석에서 기계학습을 이용한 방향성에 대한 연구는 주가나 투자위험의 예측을 중심으로 이루어졌으며, 최근에 와서야 실전투자를 위한 매매시스템(trading system) 개발에 대한 연구가 이루어지고 있다. 인공지능형 주가예측모형에서는 ANN(artificial neural networks), fuzzy system, SVM(Support Vector Machine) 등의 기법이 주로 활용되고 있다. 본 연구에서는 방향성매매를 위한 지능형 기계학습방법 중에서도 패턴인식에서 좋은 성과를 보이고 있는 은닉마코프 모형(Hidden Markov Model)을 이용한다. 실무적으로는 방향성 예측을 위해 주로 주가의 추세분석(Trend Analysis)을 활용한다. 다양한 기술적 지표를 이용한 추세분석에 기반한 시스템트레이딩(System Trading) 기법은 실전투자에서 점차 확대추세에 있다. 본 연구에서는 시스템트레이딩 기법 중 실무에서 많이 이용되는 이동평균교차전략(moving average cross)에 연속 은닉마코프모형을 적용한 지능형 매매시스템을 제안하고, 실제 주가자료를 이용한 시뮬레이션 결과를 제시한다. 세계적 선물시장으로 성장한 KOSPI200 선물시장에서 제안된 매매시스템의 장기간의 투자성과를 분석하기 위하여 지난 21년 동안의 KOSPI200 주가지수자료를 실증 분석하였다. 분석결과는 KOSPI200 주가지수선물의 방향성매매에서 제안된 CHMM기반 지능형 매매시스템이 실전에서 일반적으로 활용되는 시스템트레이딩 기법의 투자성과를 개선할 수 있음을 보여주었다.

3차원 코일 모델링을 통해 위상배열코일 성능을 평가하기 위한 프로그램 (A Tool Box to Evaluate the Phased Array Coil Performance Using Retrospective 3D Coil Modeling)

  • ;;;조민형;이수열
    • Investigative Magnetic Resonance Imaging
    • /
    • 제18권2호
    • /
    • pp.107-119
    • /
    • 2014
  • 목적: 실제 촬영 결과와 전자기 모의실험 결과를 시각적으로 비교함으로써 위상배열코일을 이루는 모든 코일 요소의 감도를 효과적으로 검증할 수 있는 소프트웨어를 개발하였다. 대상과 방법: 위상배열코일검증기(PACE)라 불리는 프로그램을 MATLAB과 C언어를 이용해 구현하였다. 위상배열 코일검증기는 코일 소자의 3차원 형상 모델 구축, FDTD 모의실험 결과의 수용, 보통의 직각좌표계 및 코일면에 기준하는 직각좌표계 상에서 각기 코일 소자 감도를 도시하는 기능을 가지고 있다. 위상배열코일의 3차원 형상 모델을 구축하기 위해 바늘침 모양의 3차원 전자기 위치추적기를 사용하였다. 3차원 형상 모델을 만든 뒤, 이 형상 모델 데이터를 FDTD 모의실험 장치에 보낼 수 있게 하였다. 결과: 3차원 전자기 위치추적기를 이용해 실제 실험에 사용된 위상배열코일과 FDTD 모의실험에 사용된 위상배열코일 모델을 정확하게 일치시킴으로써, 각기 코일 소자의 공간적 감도를 평가할 때 모의실험 결과와 촬영실험 결과 사이 정확한 비교가 가능하게 되었다. 모의실험과 실제 촬영실험에는 36 채널의 헬멧형 위상배열코일을 사용하였다. MRI 촬영 대상체로는 FDTD 모의실험의 모델과 같은 크기와 형상을 가진 원통형 팬텀을 사용하였다. 개발한 프로그램에서는 위상배열코일의 성능을 편리하게 평가하기 위해 관심 코일 소자를 쉽게 선택할 수 있게 하였다. 결론: 개발한 위상배열코일 성능 검증 프로그램은 위상배열코일의 개발 및 정기적인 유지보수에 사용될 수 있을 것으로 기대한다.

차세대 리튬 금속 전지 연구 및 개발을 위한 코인형 전지의 효율적 설계 (A Rational Design of Coin-type Lithium-metal Full Cell for Academic Research)

  • 이민규;이동현;한재웅;정진오;최현빈;이현태;임민홍;이홍경
    • 전기화학회지
    • /
    • 제24권3호
    • /
    • pp.65-75
    • /
    • 2021
  • 코인형 전지는 리튬 이차 전지 연구의 주요 평가 플랫폼으로써 새로운 소재 및 개념을 발굴하고 차세대 전지의 기초 연구에도 큰 기여를 하고 있다. 리튬 금속 전지는 500 Wh kg-1 이상의 에너지 밀도를 구현할 수 있어 유망한 차세대 리튬 이차 전지 후보군으로 고려되고 있으나, 덴드라이트 형태의 리튬 전착과 함께 극심한 부피 변화 및 표면적 증가라는 성능 열화에 매우 취약하다. 특히, 리튬 금속 전지의 수명은 전해질 양, 리튬 두께, 내부 압력 등과 같은 전지 설계 및 구조에 매우 의존하기 때문에 코인셀 수준에서의 성능 평가 및 신뢰성에 치명적이다. 따라서, 기존 코인셀 구조를 개선한 리튬 금속 음극 특화 전지 설계 및 규격화가 요구된다. 본 연구에서는 상용수준에서의 주요 전지 설계 인자인 극소량의 전해질과 높은 양극 로딩 레벨, 박막 리튬 사용 등의 환경에서 성능 및 재현성을 확보한 코인셀 구조를 제안한다. 양극과 음극의 면적비를 1에 근접하게 제어하여 비활성 공간을 최소화하고 용량 저하현상을 완화시켰다. 또한, 코인셀 내 압력을 정량화하여 압력의 균일성이 중요한 인자임을 규명하고 유연성 고분자 (PDMS) 필름 도입과 내부 부품의 변화를 통해 기존보다 높고 (0.6 MPa → 2.13 MPa) 균일한 압력(표준편차: 0.43 → 0.16)이 가하도록 개조하였다. 이를 통해 최적의 설계를 정립을 통해 기존보다 향상된 재현성을 확인하였다.

CPFD를 이용한 태양열 유동층 흡열기의 수력학적 특성 해석 (Analysis of Hydrodynamics in a Directly-Irradiated Fluidized Bed Solar Receiver Using CPFD Simulation)

  • 김수영;원근혜;이민지;김성원
    • Korean Chemical Engineering Research
    • /
    • 제60권4호
    • /
    • pp.535-543
    • /
    • 2022
  • 실리콘 카바이드 입자(평균 입도 123 ㎛)의 유동층 태양열 흡열기의 성능 및 효율에 영향을 미치는 입자 거동 해석을 위해 MP-PIC 모델을 이용하여 전산모사를 수행하였고, 기존 실험결과와의 비교를 통해 검증하였다. 특히, 본 연구에서는 실험적으로 접근하기 어려운 유동층 표면 부근에서의 거동을 모사함으로써 흡열 성능과 입자 거동과의 상호 영향을 분석하였다. CPFD 모사결과는 입자층 및 프리보드에서의 평균 고체체류량과 압력요동 등 수력학적 특성 실험결과를 잘 예측하였다. 입자 흡열기에서 1차적으로 태양열 에너지를 흡수하여 층 내부로 전달하는 층 표면 부근에서의 국부 고체체류량은 입자층 내 기포거동에 따라 중심부에서 상대적으로 낮은 값을 나타내는 불균일 분포를 나타내었다. 프리보드 영역에서 국부 고체체류량은 기체속도가 증가할수록 축방향과 각 높이에서의 횡방향에서 불균일성이 증가하였고, 이는 입자 흡열기의 프리보드 영역 내 비산된 입자에 의해 반사된 태양광 에너지 손실과 연관된 압력강하 상대표준편차 증가의 원인임을 나타내었다. 입자 흡열기 내 기체속도 증가에 따른 국부적인 기체 및 입자 속도의 변화에 대한 고찰을 통해, 유동층 내 국부적인 입자거동 특성은 Geldart B 입자 물성과 관련된 입자층 내 기포 거동과 밀접하게 연관됨을 확인하였다. 유동층 입자 흡열기의 성능 척도인 일사량 당 유동기체의 출입구 온도차(∆T/IDNI)는 입자 층 표면 및 표면 상부 프리보드 영역 내 압력요동 RSD와 상관관계가 매우 높음을 확인하였고, 이 결과는 흡열기 성능 개선에 활용할 수 있을 것으로 판단되었다.

On the Breeding of “CSR18${\times}$CSR19”- A Robust Bivoltine Hybrid of Silkworm, Bombyx mori L. for the Tropics

  • Kumar, N.Suresh;Basavaraja, H.K.;Kumar, C.M.Kishor;Reddy, N.Mal;Datta, R.K.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제5권2호
    • /
    • pp.153-162
    • /
    • 2002
  • Earlier breeding experiments undertaken at Central Sericultural Research and Training Institute, Mysore, India since a decade had resulted in the development of many productive and qualitatively superior bivoltine hybrids. However, the hot climatic conditions of tropics prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids. This has necessitated breeding of compatible bivoltine hybrids for year-round rearing. Accordingly, the Japanese hybrid, B2Ol ${\times}$ BCS12 which was found to be tolerant to high temperature was used as breeding resource material. Following hybridization and selection rearing of silkworms was taken up in SERICATRON (Environmental chamber with precise and automatic control facilities for uniform maintenance of temperature and humidity) at high temperature of $36{\times}1^{\circ}C$ and 85${\times}$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65{\times}$5% RH. Directional selection was resorted to the batches reared at 36$\pm$1$^{\circ}C$ till F$_{5}$ keeping pupation rate as important selection criteria. From $F_{2}% onwards the experiment was modified in such a way as to conduct normal rearing every alternate generation to regain the lost vitality due to continuous exposure to high temperature and high humidity stress. At $F_{2}$ , Oval and dumb-bell cocoons were separated out and designated as CSR18 and CSR19, respectively. By utilizing these lines at $F_{12}$, the hybrid CSR18$\times$CSR19 was prepared and studied for the thermotolerance by subjecting to stress condition at high temperature of 36$\pm$1$^{\circ}C$ and 85$\pm$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65${\times}$5% RH. The better performance of CSR18${\times}$CSR19 (survival > 88%) at $36{\times}1^{\circ}C$ clearly indicates the general superiority of CSR18${\times}$CSR19 with regard to high temperature tolerance over the productive hybrids and CSR18$\times$CSR19 can perform well in varied agro-climatic conditions of the tropics with optimum qualitative and quantitative characteristics.s.

손가락 정렬과 회전에 강인한 비 접촉식 손가락 정맥 인식 연구 (A Study on Touchless Finger Vein Recognition Robust to the Alignment and Rotation of Finger)

  • 박강령;장영균;강병준
    • 정보처리학회논문지B
    • /
    • 제15B권4호
    • /
    • pp.275-284
    • /
    • 2008
  • 최근 개인의 정보 보호에 대한 중요성이 증가함에 따라 생체 인식 기술이 출입 통제 시스템 또는 개인 인증, 인터넷 뱅킹, ATM 기기 등 여러 응용에서 사용되어지고 있다. 손가락 정맥 인식이란 사람마다 고유한 손가락 정맥 패턴 정보를 사용하는 고 신뢰도의 생체 인식 기술이다. 본 연구에서는 비 접촉식 손가락 정맥 인식을 위한 새로운 장치 및 방법을 제안한다. 본 연구는 기존의 연구에 비해 다음과 같은 다섯 가지의 장점을 나타내고 있다. 첫째, 본 논문에서 제안하는 장비는 사용자의 손가락 정맥영상 취득 시, 손가락의 뒷면과 손가락 끝, 옆을 지지할 수 있는 최소한의 지지대만을 사용함으로써 사용자의 불쾌감을 최소화할 수 있다. 둘째, 손가락 정맥 영상을 취득하기 위한 카메라 앞에 45도 기울어진 핫 미러(hot mirror)를 사용함으로써, 손가락 정맥 영상 취득 장치의 두께를 줄일 수 있었다. 이는 핸드폰과 같이 두께에 제한이 있는 여러 응용 분야에서 널리 사용될 수 있음을 의미한다. 셋째, 본 연구에서는 LBP(Local Binary Pattern) 방법을 기반으로 손가락 정맥의 특징 정보를 추출함으로써 부분적으로 심하게 어둡거나 밝은 영역을 포함하는 균일하지 않은 조명의 영향을 줄일 수 있었다. 넷째, 비 정맥 영역을 인식에 사용하지 않음으로써 인식 성능을 보다 향상 할 수 있었다. 다섯째, 추출된 손가락 정맥 코드를 기 등록된 코드와 매칭 시, 수평 및 수직방향 비트 이동 방법을 사용함으로써 영상 취득 시 손가락의 움직임과 회전에 의한 본인데이터의 변화도를 줄일 수 있었다. 실험 결과, 본 논문에서 제안하는 손가락 정맥 인식방법의 EER(Equal Error Rate)은 0.07423%였고 전체 처리 시간은 91.4ms였다.