• 공업화학
• /
• 제35권3호
• /
• pp.248-254
• /
• 2024

본 연구에서는 전나무와 잣나무 잎으로부터 항균특성을 갖는 기능성 물질을 추출한 후 반응표면분석법 중 중심합성 계획법(CCD-RSM)을 이용하여 최적화하였다. 최적 추출 조건은 전나무의 경우 추출온도(59.5 ℃)와 주정/초순수 부피비(69.5 vol.%)이었으며, 이때 반응치는 추출수율(13.5%), 대장균 억제직경(11.6 mm), 황색포도상구균 억제직경(9.3 mm)로 산출되었다. 또한 잣나무의 경우에는 최적 추출조건인 추출온도(59.2 ℃)와 주정/초순수 부피비(67.8 vol.%)에 서 추출수율(4.8%), 대장균 억제직경(7.9 mm), 황색포도상구균 억제직경(12.5 mm)로 산출되었다. 각 천연물의 최적조건에서 실제 실험 결과 전나무 잎의 추출수율은 13.0%, 대장균 억제직경은 11.7 mm, 황색포도상구균 억제직경은 9.2 mm로 약 ± 2.30% 오차율을 나타내며, 잣나무 잎의 추출수율은 5.1%, 대장균 억제직경은 7.5 mm, 황색포도상구균 억제직경은 12.3 mm로 ± 4.23% 오차율을 나타내었다.

• 한국대기환경학회지
• /
• 제13권6호
• /
• pp.475-486
• /
• 1997

The characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The atmospheric aerosols were sampled with classifying into 12 size ranges by the use of Andersen low-pressure impactor. Collected aerosol particles were extracted by ultrapure water and filtered to be separated into water-soluble and insoluble components. The concentrations 12 elements in both components were determined by PIXE analysis. And the concentrations of 8 ions in the soluble component were analyzed by ion chromatography. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The mass size distributions of S$(SO_4^{2-}), K(K^+), Zn and NH_4^+$ skewed to the smaller size range and those of Si, Ca$(Ca^{2+}), Fe, Na^+ and Mg^{2+}$ skewed to the larger size range. They had roughly one peak in the fine and coarse particle region,respectively. On the other hand, the mass size distribution of Ti, Mn, Ni, Cu, $Cl^- and NO_3^-$ were represented as the bimodal distribution. Fe and Si in the aerosol particles extracted into pure water are existing in high insoluble state. Conversely, almost the whole of S is dissolved in water.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.65-75
• /
• 2015

In this study, cation and anion exchange process for performance evaluation was conducted. A pilot plant for the ultrpure water production was installed with the capacity of $25m^3/d$. The various production rate and regeneration of ion exchange rate were tested to investigate the design parameters. The test resulst was applied to calculate the operating costs. Changing the flow rate of the ion exchange capacity of the reproduction reviewed the cation exchange process as opposed to the design value is 120 to 164% efficiency, whereas both anion exchange process is 82 to 124% efficiency, respectively. This results can be applied for more large scale plant if the scale up parameters are consdiered. The ion exchange capacity of the application in accordance with the design value characteristic upon application equipment is expected to be needed. In this study, the performance of cation and anion exchange resin process was evaluated with pilot plant($25m^3/d$). The ion exchange capacity along with space velocity and regeneration volume was evaluated. In results, the operation results was compared with design parameters.

• 멤브레인
• /
• 제16권3호
• /
• pp.167-181
• /
• 2006

전기탈이온 시스템은 전기투석과 이온교환수지법의 혼합 공정으로서 외부전기장 하에서의 이온교환매개체를 통해 이온이 제거되어 고순수를 제조할 수 있도록 고안된 장치이다. 전기탈이온 장치는 이온의 제거 메커니즘과 이온교환 매개체의 전기적 재생 메커니즘으로 설명되며 이를 이용하여 희석조의 성능을 최적화하는 것이 시스템의 효과적인 사용을 위해서 필요하다. 또한 전기탈이온 장치의 다양한 분야에서의 적용을 위해서는 스택구성을 다양하게 변경하여 적용가능성을 판단하는 것이 필요하다. 이를 효과적으로 달성하기 위해서는 기존에 제시되었던 다양한 시스템 특성분석법과 이동현상 관련 수식들을 이해하여 전기탈이온 스택구성에 적용하는 것이 무엇보다 중요하다. 본 총설에서는 전기탈이온 장치의 최적화를 위해 필요한 기초 이론들과 방법들에 대해서 살펴보고 현재의 연구동향에 대해서 고찰하여 분리공정으로서의 이해를 높이고자 하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 제4회 하계분리막 Workshop (초순수 제조와 막분리 공정)
• /
• pp.149-153
• /
• 1996

반도체 소자 제조 공정이 고 집적화 됨에 따라 습식 세정방법에 의한 세정공정의 중요성이 더욱 증가 되어지고 있으며, 특히 그 중에서 전체 세정공정의 약 절반을 차지하고 있는 Deionised water에 의한 rinsing 공정의 경우 ultrapure water의 quality가 최근 지속적으로 향상이 되어짐에 따라 많은 발전을 자져 왔다. 일반적으로 Deionised water에 함유하고 있는 TOC(total oxidisable components), bacteria, metallic impurity, desolved oxygen cencentration, colloidal material impurity (예를 들면 Silica, oraganic substrate)등은 ultra pure water의 quality를 결정하는데 매우 중요한 factor로 작용하고 있으며, 이러한 불순물들이 반도체 제조공정중 wafer surface에 흡착되어 졌을때 여러형태의 defect들을 유발한다고 알려져 있다. 그러나 pseudommonas, flavobacterlum, alcaligene등의 기 얄려진 bacteria들의 경우 Deionised water를 supply해주는 배관의 Inner surface에 잘 흡착 되지만 고온의 water 혹은 과산화수소수($H_{2}O_{2}$) 를 이용하여 주기적으로 처리 해줌으로 인하여 이에 대한 문제점을 어느정도 최소화 시킬수 있다. 위의 두가지 방법중 전자의 경우 chemical을 사용하지 않고, 유지 및 관리가 간편하며, 용존산소량을 줄일수 있다는 점에서 장점이 있으나, 전 ultra pure water의 system이 열적으로 안정해야 하고 경제적인 문제가 수반하는 단점을 가지고 있다. 후자의 경우, 미량의 과산화수소수 (1~10,000 ppm)를 이용해 처리 해주는 방법의 경우 경제적으로 큰 장점이 있고, 처리가 단순하다는 장점이 있으나 과산화수소수 자체에 포함하고 있는 높은 impurit level, 그리고 처리후 장시간의 flushing time을 가져야 한다는 단점등이 존재 하고 있다.

• Membrane and Water Treatment
• /
• 제5권3호
• /
• pp.207-219
• /
• 2014

Fouling is one of the critical factors associated with the application of membrane technology in treating palm oil mill effluent (POME), due to the presence of high concentration of solid organic matter, oil, and grease. In order to overcome this, chemical cleaning is needed to enhance the effectiveness of membranes for filtration. The potential use of sodium hydroxide (NaOH), sodium chloride (NaCl), hydrochloric acid (HCl), ethylenediaminetetraacetic acid (EDTA), and ultrapure water (UPW) as cleaning agents have been investigated in this study. It was found that sodium hydroxide is the most powerful cleaning agent, the optimum conditions that apply are as follows: 3% for the concentration of NaOH, $45^{\circ}C$ for temperature solution, 5 bar operating pressure, and solution pH 11.64. Overall, flux recovery reached 99.5%. SEM images demonstrated that the membrane surface after cleaning demonstrated similar performance to fresh membranes. This is indicative of the fact that NaOH solution is capable of removing almost all of the foulants from PES membranes.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.6-13
• /
• 2022

The electrostatic phenomenon seriously issued in extreme ultraviolet semiconductor cleaning was studied in junction with molecular dynamic aspect. It was understood that two lone pairs of electrons in water molecule were subtly different each other in molecular orbital symmetry, existed as two states of large energy difference, and became basis for water clustering through hydron bonds. It was deduced that when hydrogen bond formed by lone pair of higher energy state was broken, two types of [H₂O]⁺ and [H₂O]^- ions would be instantaneously generated, or that lone pair of higher energy state experiencing reactions such as friction with Teflon surface could cause electrostatic generation. It was specifically observed that, in case of electrolyzed cathode water, negative electrostatic charges by electrons were overlapped with negative oxidation reduction potentials without mutual reaction. Therefore, it seemed that negative electrostatic development could be minimized in cathode water by mutual repulsion of electrons and [OH]^- ions, which would be providing excellences on extreme ultraviolet cleaning and electrostatic control as well.

• 공업화학
• /
• 제28권4호
• /
• pp.410-419
• /
• 2017

지구온난화, 환경오염, 가뭄 등의 재해현상으로 인한 물 부족 현상이 진행됨에 따라 수자원의 활용성을 증가시키기 위한 원천기술의 개발과 연구들이 진행되고 있다. 그중 수처리 분리막 기술은 기존 물리화학적 및 생물학적 공정보다 수질 개선 효과가 우수하고 약품 사용이 배제된 환경친화적인 공정이다. 수처리 분리막은 오폐수처리, 정수처리, 해수담수처리, 이온교환 공정, 초순수 제조, 유기용매 분리 등 다양한 분야에 적용되며 분리막을 이용한 수처리 기술은 점차 응용 범위가 넓어지고 있는 추세이다. 수처리 분리막의 핵심 기술은 분리성능을 조절하기 위한 기공 사이즈를 조절하는 것으로써 더 나은 성능을 나타내는 분리막을 개발하기 위한 연구가 활발히 진행되고 있다. 본 총설에서는 수처리용 분리막의 특허 및 논문의 기술경쟁력 평가를 통하여 국가별, 기관별 발표 빈도수를 정리하였으며, 오폐수처리용 분리막, 정수처리용 분리막, 해수담수화용 분리막, 그리고 이온교환공정용 분리막에 대한 평가를 진행하고, 향후 연구 방향에 대하여 제시해 보고자 한다.

• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.117-126
• /
• 2006

The purpose of this study is to develop a badge-type passive sampler for the measurement of short-term nitrogen dioxide and to evaluate its performance. The principle of the method is a colorimetric reaction of nitrogen dioxide with sulfanilic acid, N-1-naphthylethylendiamine, and phosphoric acid. First, it has been shown that the filter paper should be rinsed with ultrapure water and ultrasound, and then dried in a vacuumed desiccator. The concentration and volume of absorption reagent (triethanolamine) were $20\%$ and 100 ${\mu}L$, respectively. The extraction time was determined as 60 min. Second, duplicate measurements (n= 116) were carried out for evaluating the precision of the passive sampler. The relative error and the correlation coefficient between duplicates are $3.4\pm 3.0\%$ and 0.994, respectively. In addition, the $95\%$ confidence interval of intraclass correlation coefficient and the estimated value are 0.992$\sim$0.996 and 0.994, respectively. Third, a paired t-test was carried out for evaluating the accuracy of the passive sampler (n=40). In the result of the test, the $95\%$ confidence interval of the difference was -1.710 ppb <$\gamma$< 0.788 ppb. Finally, the average concentration of blanks, measurement detection limit, limit of detection, and limit of quantification are $2.4\pm 0.4$ ppb, 104 ppb, 3.8 ppb, and 7.0 ppb, respectively.

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.249-257
• /
• 2006

In this work, the adsorptive and desorptive behavior of reduced sulfur compounds (RSC) was investigated using the combination of the Peltier cooling (PC)/thermal desorption (TD) unit with the gas chromatographic (GC) detection technique. To examine the adsorptive characteristics of RSC on clothing materials, a total of nine experiments were conducted in a stepwise manner. Once small towel pieces are exposed to significant quantities of RSC standards with high concentrations (10 ppm), the desoprtion stage was then induced by deloading RSC with ultrapure $N_2$ at three different flow rates (FR) of 20, 40, and 60 mL/min. At each FR, the total deloading volume of 400, 800, and 1,600 mL were maintained. These results were then compared in terms of odoring efficiency by dividing the total amount of desorption with the total amount used for exposition or RSC loading. The results indicated that desorption reaction of certain compounds ($CH_3SH$ and DMS) can be influenced significantly with the reducing FR, while they are not affected directly by the total deloading volume. In addition, when the extent of adsorption was compared for most S compounds by the odoring efficiency term, the extent of absorption generally occurred at approximately 1/1000 level of original exposition.