• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.130-131
• /
• 2005

In the era of submicron devices, super ultra thin gate oxide characteristics are required. Titanium silicide process has studied gate oxide reliability and dielectric strength characteristics as the composition of gate electrode. In this study the author observed process characteristics on MOS structure. In view point of the process characteristics of MOS capacitor, the oxygen & Ti, Si2 was analyzed by SIMS analysis on before and after annealing with 1,2 step silicidation, the Ti contents[Count/sec]of $9.5{\times}1018$ & $6.5{\times}1018$ on before and after 2'nd anneal. The oxygen contents[Count/sec] of $4.3{\times}104$ & $3.65{\times}104$, the Si contents[Count/sec] of $4.2{\times}104$ & $3.7{\times}104$ on before and after 2'nd anneal. The rms value[A] was 4.98, & 4.03 on before and after 2'nd anneal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.212-212
• /
• 2013

We fabricate and characterize top gate Graphene transistor using aluminum oxide as a gate insulator by atomic layer deposition (ALD). It is found that due to absence of functional group and dangling bonds, ALD of metal oxide is difficult on Graphene. Here we used 4-mercaptopheneol as a functionalization layer on Graphene to facilitate uniform oxide coverage. Contact angle measurement and Atomic force microscopy were used to confirm uniform oxide coverage on Graphene. Raman spectroscopy revealed that functionalization with 4-mercaptopheneol does not induce any defect peak on Graphene. Our device shows mobility values of 4,000 $cm^2/Vs$ at room temperature which also suggest top gate stack does not significantly increase scattering. The noncovalent functionalization method is non-destructive and can be used to grow ultra-thin dielectric for future Graphene applications.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.187-189
• /
• 2015

A charge-trap flash (CTF) thin film transistor (TFT) memory is proposed at a low-temperature process (≤ 450℃). The memory cell consists of a sputtered oxide-nitride-oxide (ONO) gate dielectric and Schottky barrier (SB) source/drain (S/D) junctions using nickel silicide. These components enable the ultra-low-temperature process to be successfully achieved with the ONO gate stacks that have a substrate temperature of room temperature and S/D junctions that have an annealing temperature of 200℃. The silicidation process was optimized by measuring the electrical characteristics of the Ni-silicided Schottky diodes. As a result, the Ion/Ioff current ratio is about 1.4×10⁵ and the subthreshold swing and field effect mobility are 0.42 V/dec and 14 cm²/V·s at a drain voltage of −1 V, respectively.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.996-1000
• /
• 2005

Experimental results are presented for the degradation of 3 nm-thick gate oxide $(SiO_2)$ under both Negative-bias Temperature Instability (NBTI) and Hot-carrier-induced (HCI) stresses using P and NMOSFETS, The devices are annealed with hydrogen or deuterium gas at high-pressure $(1\~5\;atm.)$ to introduce higher concentration in the gate oxide. Both interface trap and oxide bulk trap are found to dominate the reliability of gate oxide during electrical stress. The degradation mechanism depends on the condition of electrical stress that could change the location of damage area in the gate oxide. It was found the trap generation in the gate oxide film is mainly related to the breakage of Si-H bonds in the interface or the bulk area. We suggest that deuterium bonds in $SiO_2$ film are effective in suppressing the generation of traps related to the energetic hot carriers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.29-30
• /
• 2005

Experimental results are presented for the degradation of 3 nm-thick gate oxide ($SiO_2$) under both Negative-bias Temperature Instability(NBTI) and Hot-carrier-induced(HCI) stresses using P and NMOSFETs that are annealed with hydrogen or deuterium gas at high-pressure (1~5 atm.). Statistical parameter variations depend on the stress conditions. We suggest that deuterium bonds in $SiO_2$ film is effective in suppressing the generation of traps related to the energetic hot electrons.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.71-74
• /
• 1998

In this Paper, we investigate the electrical properties of ultra-thin(70${\AA}$) nitrided(NO) and reoxidized nitrided oxide(ONO) film that ale considered to be premising candidates for replacing conventional silicon dioxide film in ULSI level integration. we studied I$\sub$g/-V$\sub$g/ characteristics to know the effect of nitridation and reoxidation on the current conduction, leakage current time-dependent dielectric breakdown(TDDB) to evaluate charge-to-breakdown(Q$\sub$bd/), and the effect of stress temperature(25, 50, 75, 100$^{\circ}C$) and compared to those with thermal gate oxide(SiO$_2$) of identical thickness. From the measurement results, we find that reoxidized nitrided oxide(ONO) film shows superior dielectric characteristics, leakage current, and breakdown-to-charge(Qbd) performance over the NO film, while maintaining a similar electric field dependence compared to NO layer. Besides, ONO film has strong resistance against variation in temperature.

• 한국정보통신학회논문지
• /
• 제18권1호
• /
• pp.135-141
• /
• 2014

본 연구에서는 무접합 MuGFET의 핀 폭에 따른 문턱전압의 변화를 줄이기 위한 소자 설계 가이드라인을 제시하였다. 제작된 무접합 MuGFET으로부터 핀 폭이 증가할수록 문턱전압의 변화가 증가하는 것을 알 수 있었다. 무접합 MuGFET의 핀 폭에 따른 문턱전압의 변화를 줄이기 위한 소자 설계가이드라인으로 게이트 유전체, 실리콘박막의 두께, 핀 수를 최적화 하는 연구를 3차원 소자 시뮬레이션을 통해 수행하였다. 고 유전율을 갖는 $La_2O_3$ 유전체를 게이트 절연층으로 사용하거나 실리콘 박막을 최대한 얇게 하므로 핀 폭이 증가해도 문턱전압의 변화율을 줄일 수 있음을 알 수 있었다. 특히 유효 채널 폭을 같게 하면서 핀 수를 많게 하므로 문턱전압 변화율과 문턱전압 아래 기울기를 작게 하는 것이 무접합 MuGFET의 최적의 소자 설계 가이드라인임을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.202-208
• /
• 2001

In Recent results suggested that doping $Ta_2O_5$ with a small amount of $TiO_2$ using standard ceramic processing techniques can increase the dielectric constant of $Ta_2O_5$ significantly. In this paper, this concept is studied using RTCVD (Rapid Thermal Chemical Vapor Deposition). Ti-doped $Ta_2O_5$ films are deposited using $TaC_{12}H_{30}O_5N$, $C_8H_{24}N_4Ti$, and $O_2$ on both Si and $NH_3$-nitrided Si substrates. An $NH_3$-based interface layer at the Si surface is used to prevent interfacial oxidation during the CVD process and post deposition annealing is performed in $H_2/O_2$ ambient to improve film quality and reduce leakage current. A sputtered TiN layer is used as a diffusion barrier between the Al gate electrode and the $TaTi_xO_y$ dielectric. XPS analyses confirm the formation of a ($Ta_2O_5)_{1-x}(TiO_2)_x$ composite oxide. A high quality $TaTi_xO_y$ gate stack with EOT (Equivalent Oxide Thickness) of $7{\AA}$ and leakage current $Jg=O.5A/textrm{cm}^2$ @ Vg=-1.0V has been achieved. We have also succeeded in forming a $TaTi_x/O_y$ composite oxide by rapid thermal oxidation of the as-deposited CVD TaTi films. The electrical properties and Jg-EOT characteristics of these composite oxides are remarkably similar to that of RTCVD $Ta_2O_5, suggesting that the dielectric constant of $Ta_2O_5$ is not affected by the addition of $TiO_2$.

• 한국정보통신학회논문지
• /
• 제2권3호
• /
• pp.431-437
• /
• 1998

본 논문에서는, ULSI에서 기존의 실리콘 절연막을 대체할 것으로 여겨지는 질화 산화막(NO)과 재산화 질화 산화막(ONO)의 전기적 특성을 조사하였다. 특히, 질화 및 재산화 시간에 따른 NO와 ONO막의 전류전압 특성, 게이트 전압이동, 시간종속 절연항복 특성(TDDB) 변화를 측정하였고, 외부 온도 변화에 따른 최적화 된NO와 ONO막의 누설 전류와 절연체가 항복에 이르게 하는 전하량(Q$\_bd$)변화를 측정하였다. 그런 다음 기존의SIO$\_2$와 비교하였다. 측정 결과로부터, NO와 ONO막은 공정시간에 상당히 의존적이었으며, 최적화된 ONO막은 같은 전계를 유지하는 동안 절연 특성 및 Q$\_bd$특성에서 NO막과 SIO$\_2$에 비하여 우수한 성능을 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.198-201
• /
• 2006

The optimization of poly-Si TFT process on metal foil for UTL AMOLED was systematically investigated. The improvement in device performance of poly-Si TFT on metal foil was achieved by optimizing the dopant activation condition and gate dielectric structure. Hence, the world first flexible full color 5.6-inch AMOLED with top emission mode on poly-Si TFT stainless steel foil is demonstrated.