• Journal of Technologic Dentistry
• /
• v.39 no.2
• /
• pp.75-82
• /
• 2017

Purpose: This study provided the basic data for selection the zirconia block and CAM by means of marginal fitness observations, flexural strength test and hardness test. Methods: Three dental zirconia blocks(ABCera, NaturaZ, ST98) and two dental milling machines(CAD/CAM MS, DWX-50) were used in this study. Metal abutment(diameter 10 mm, height 5 mm, inclined angle $3^{\circ}$ taper, 1 mm chamfer margin) was fabricated by Ti customized abutment, and then zirconia copings were fabricated for each ten specimens. Silicone replica technique was used to observe the marginal fitness of cross-sections with a stereomicroscope at ${\times}50$ magnification. The dental zirconia blocks was cut into 10 pieces each having a size of $25mm{\times}5mm{\times}1mm$, and fabricated according to the manufacturer's instructions, and flexural strength was measured using a universal testing machine. For hardness test, a micro Vickers hardness tester was used as it was in the flexural strength test. Statistical analysis was performed by one way ANOVA and post-test was performed by Scheffe test. Results: For marginal fitness of bucco-lingual axial, ZU group($59.7{\pm}10.3{\mu}m$) was the lowest, followed by RA, ZA, ZD, RD, RU. For marginal fitness of mesio-distal axial, ZU group($59.3{\pm}10.2{\mu}m$) was the lowest, followed by RA, ZA, RD, ZD, RU. One-way ANOVA showed statistically significant difference between groups(p<0.05). For flexural strength, ABCera block($718.0{\pm}57.2MPa$) was the highest, followed by NaturaZ, ST98. For hardness, ABCera block($1550.3{\pm}19.8Hv$) was the highest, followed by ST98, NaturaZ. There was no significant difference in flexural strength and hardness between blocks(p>0.05). Conclusion: Based on the results of this study, the type of dental zirconia block did influence the marginal fitness, and all dental zirconia blocks are expected to be suitable for clinical application. The highest flexural strength and hardness were ABCera block, and no statistically significant difference was observed.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.2
• /
• pp.178-187
• /
• 2020

Objective : The extensive vasa vasorum network functions as a conduit for the entry of inflammatory cells or factors that promote the progression of angiogenesis and plaque formation. Therefore, we investigated the correlation between the carotid vasa vasorum activities and carotid plaque vulnerability using indocyanine green video angiography (ICG-VA) during carotid endarterectomy (CEA). Methods : Sixty-nine patients who underwent CEA were enrolled prospectively from September 2015 to December 2017. During CEA, a bolus of ICG was injected intravenously before and after resecting the atheroma. Additionally, we performed immunohistochemistry using CD68 (a surface marker of macrophages), CD117 (a surface marker of mast cells), and CD4 and CD8 (surface markers of T-cells) antibodies to analyze the resected plaque specimens. Results : The density of active vasa vasorum was observed in all patients using ICG-VA. The vasa vasorum externa (VVE) and interna (VVI) were seen in 11 (16%) and 57 patients (82.6%), respectively. Macroscopically, the VVE-type patterns were strongly associated with preoperative angiographic instability (81.8%, p=0.005) and carotid plaque vulnerability (90.9%, p=0.017). In contrast, the VVI-type patterns were weakly associated with angiographic instability (31.6%) and plaque vulnerability (49.1%). CD68-stained macrophages and CD117-stained mast cells were observed more frequently in unstable plaques than in stable plaques (p<0.0001, p=0.002, respectively). Conclusion : The early appearance of VVE, along with the presence of many microvessel channels that provided nutrients to the developing and expanding atheroma during ICG-VA, was strongly associated with unstable carotid plaques. The degree of infiltration of macrophages and mast cells is possibly related to the formation of unstable plaques.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.703-709
• /
• 2013

The aim of this study was to investigate the prevalence of Extended-spectrum ${\beta}$-lactamase (ESBL) gene and quinolone resistance determinant (qnr) and the pattern of antibiotic resistance in the ESBL-producing Escherichia coli clinical isolates. The 42 ESBL-producing strains from total 274 isolates were detected using a double disk synergy test. They were isolated from various specimens, such as urine (28 strains), sputum (6 strains), pus (3 strains), wound (2 strains), blood (2 strains), and tissue (1 strain). Using the PCR with the specific primers ESBL, ESBL and qnr gene types were determined. Thirty-five strains possessed one or two ESBL genes. CTX-M-1 type was the most abundant followed by CTX-M-9 type and TEM, but SHV, CTX-M-2, and CTX-M-8 gene types were not detected. qnr gene types were detected from ten isolates in the order of qnrB4, qnrB1, and qnrS. Coexistence of ESBL and qnr genes was found. ESBL-producing isolates showed high resistance against some antibiotics, such as cefotaxmie (80.0%), levofloxacin (82.9%), and ampicillin (100%). Neither a synergy effect from the coexistence of ESBL and qnr genes on antibiotic resistance nor a correlation between the production of qnr gene and quinolone resistance were found.

• Korean Journal of Microbiology
• /
• v.44 no.4
• /
• pp.305-310
• /
• 2008

Staphylococcus aureus is one of the most significant pathogens and a causative agents of nosocomial infections. The emergence of methicillin resistant S. aureus (MRSA), in particular, has become a major clinical and epidemiological problems worldwide. In this study, we analyzed the toxin genes and investigated molecular epidemiological characteristics of S. aureus isolated from stools of diarrheal patients at the hospitals in Incheon. Of the 609 strains from 2,281 specimens, 173 strains retained enterotoxin; 68 isolates (39.30%), 100 isolates (57.80%) were classified to A and C type, respectively. In the antibiotic susceptibility, all of enterotoxin positive isolates were resistant to oxacillin. Eighty eight strains (50.86%) of 173 MRSA isolate possessed tsst gene, but eta and eth genes were not detected at all. In the detection of MRSA associated genes by PCR method, mecA genes were detected in 167 strains (96.53%). From the result of PFGE analysis, we classified tsst-positive MRSA to 10 types and 24 subtypes. Type A, H and F were the major strains comprised of 57.95% (51 strains), 10.22% (9 strains) and 9.09% (8 strains) respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.3
• /
• pp.277-291
• /
• 2023

This study aimed to compare the effects of applying different types of dentin bonding agents (DBAs) on tooth and on the sealing ability of CSC in regenerative endodontic procedures (REPs). Specimens were made from 120 human first premolars and categorized into the following groups based on the presence and the type of DBA: Group I, no bonding; Group II, One-Step; Group III, Clearfil SE Bond; and Group IV, Single Bond Universal. Subsequently, the groups were categorized into Subgroup a and Subgroup b, in which Endocem MTA^® Premixed Regular and Biodentine were used, respectively. The CIE L^*a^*b^* on the photos taken prior to TAP placement (S0), 1 week after TAP placement (S1), 2 weeks after TAP placement (S2), 4 weeks after TAP placement (S3) and 2 weeks after CSC placement (S4) was used to assess discoloration. The samples were submerged in a 2% methylene blue solution and magnified by 30 times under a stereomicroscope to assess microleakage. The application of DBA during REP reduced crown discoloration, while Biodentine showed minimal discoloration with or without DBA and regardless of the DBA type. Additionally, the application of DBA did not increase microleakage.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.633-644
• /
• 2008

The structural framework design uses high-strength bolts and welding in column splices. However, for the column under high compression, the number of the required high-strength bolts can be excessive and the increase of welding results in difficulty of quality inspection, the transformation of the structural steels, and the increase of erection time. According to the AISC criteria, when columns have bearing plates, or they are finished to bear at splices, there shall be sufficient connections to hold all parts securely in place. The Korean standard sets the maximum 25% of the load as criteria. Using direct contact makes it possible to transfer all compressive force through it. The objective of this study is to examine the generally applied stress path mechanism of welded or bolted columns and to verify the bending moment and compression transfer mechanism of the column splice according to metal touch precision. For this study,22 specimens of various geometric shapes were constructed according to the change in the variables for each column splice type, which includes the splice method, gap width, gap axis, presence or absence of splice material, and connector type. The results show that the application of each splice can be improved through the examination of the stress path mechanism upon metal contact. Moreover, the revision of the relative local code on direct contact needs to be reviewed properly for the economics and efficiency of the splices.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.525-534
• /
• 2006

Column-to-beam pinned connections can cause local moment to the web of a steel tube due to the distance of eccentricity between the row of bolts and the column flange, which possibility deteriorates the load capacity of column. In this study, a square hollow section tubular used finite element analysis of a square hollow section tubular column was carried out, and the column width and thickness, existence and non-existence of internal reinforcement, and existence and non-existence of compressive force were taken as variables to examine the load capacity deterioration of a square column caused by moment. To guarantee the reliability of the finite element results, some specimens were fabricated and tested. The yield line method was applied to suggest the strength formulas of the square tubular column to the beam pinned connections. Based on the study results, the column strength the moment of the square hollow section tubular column to the beam pined connections improved with the increase in the w to strength limitations, a no-reinforcement type of square hollow section tubular column was proposed, and if the limitation values were not satisfied, the reinforcement of the internal column was made mandatory. Therefore, the horizontal -reinforcement type considered the strength increase, and the fabrication of the square hollow section tubular column was ar column that considered its load capacity with the moment for the no-reinforcement and the horizontal-reinforcement types.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.9027-9031
• /
• 2014

Background: Helicobacter pylori (H. pylori) infection is an established cause of peptic ulcers and gastric cancer. The aim of this study was to identify H. pylori genotypes and to examine their associations with geographical regions and gastritis, peptic ulcers and gastric cancer in Laos. Materials and Methods: A total of 329 Lao dyspeptic patients who underwent gastroscopy at Mahosot Hospital, Vientiane, Laos during December 2010 - March 2012 were enrolled. Two biopsy specimens (one each from the antrum and corpus) were obtained for CLO testing and only CLO test-positive gastric tissue were used to extract DNA. PCR and sequencing were identified for variants of the cagA and vacA genotypes. Results: Some 119 Laos patients (36.2%) were found to be infected with H. pylori including 83 with gastritis, 13 with gastric ulcers (GU), 20 with duodenal ulcers (DU) and 3 with gastric cancer. cagA was detected in 99.2%. East-Asian-type cagA (62%) and vacA s1c (64.7%) were predominant genotypes in Laos. vacA s1c-m1b was significantly higher in GU than gastritis (53.8% vs. 24.1%; P-value=0.04) whereas vacA s1a-m2 was significantly higher in DU than gastritis (40.0% vs. 16.9%; P-value=0.03). East-Asian-type cagA and vacA s1c were significantly higher in highland than lowland Lao (100% vs. 55.8%; P-value=0.001 and 88.2% vs. 61.5%, P-value=0.03 respectively). Conclusions: H. pylori is a common infection in Laos, as in other countries in Southeast Asia. The cagA gene was demonstrated in nearly all Laos patients, cagA and vacA genotypes being possible important factors in explaining H. pylori infection and disease outcomes in Laos.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.97-104
• /
• 2023

The aim of this study was to produce polymer cement composites (PCCs) composed of polymer dispersion and cement as crack repair materials for RC structures, and to investigate their fundamental properties. The test mixtures for the study were based on EVA and SAE polymer dispersions, and the water-cement ratio was determined while varying the polymer-cement ratio(P/C) in four different levels (20%, 60%, 80%, and 100%) to achieve the desired viscosity of PCCs considering their fillability as crack repair materials. Additionally, silica fume was incorporated into P/C 80% and 100% specimens to enhance their stiffness. The basic properties of PCCs as crack repair materials, such as viscosity, flowability, fillability, tensile strength, elongation, and modulus of elasticity, were examined. The results showed that P/C depending on the type of polymer significantly affected the viscosity and flowability, and appropriate w/c ratios were needed to achieve the desired viscosity for the mixture design with consideration of fillability as crack repair materials for RC structures. All designed mixtures in this study exhibited excellent fillability. The tensile strength and elongation of PCCs satisfied the KS regulation for cement- polymer modified waterproofing coatings. The incorporation of silica fume improved the tensile strength and modulus of elasticity of PCCs. Depending on the type of polymer, mixtures using SAE showed better fundamental properties as crack repair materials for RC structures compared to those using EVA. In conclusion, SAE-based P/C 80% or 100% with the addition of up to 30% silica fume can be recommended as suitable mixtures for crack repair of RC structures.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.391-398
• /
• 2012

This paper presents the shear capacities of biaxial hollow slab with donut type hollow sphere. Recently, various types of slab systems which can reduce self-weight of slabs have been studied for increasing constructions of taller and larger building structures. A biaxial hollow slab system is widely known as one of the effective slab system, which can reduce self-weight of slab. According to previous studies, the hollow slab has low shear strength, compared to solid slab. Also, the shear capacities of biaxial hollow slab are influenced by the shapes and materials of hollow spheres. However, the current code does not provide a clear computation method for the shear strength of hollow slab. To verify the shear capacities of this hollow slab, one-way shear tests were performed. Four test specimens were used for test parameters. One was conventional RC slab and others were hollow slabs. The test parameters included two different shapes and materials of plastic balls. The shape parameters were donut and non-donut forms and the material parameters were general plastic and glass fiber plastic. The results showed that the shear strengths varied depending on hollow shapes and materials used in the slab.