• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.34-40
• /
• 2007

In this study, focusing on reducing a load in forming helical gears, the extrusion using two-step processes for manufacturing helical gear is proposed. The process is composed of the extrusion step in which spur gear to be used as a preform in next step is formed, and the torsion step in which the preform of spur gear is formed to helical gear. Upper-bound theory for the two-step process is applied and compared with the results of experiment. The result of upper-bound solution has a good agreement with that of the experiment and the FE analysis. The newly proposed method can be used as an advanced forming technique to remarkably reduce a forming load, to prolong a tool life, and to replace the conventional forming process of helical gears. Results obtained from the extrusion using two-step processes enable the designer and manufacturer of helical gear to be more efficient in this field.

• 한국멀티미디어학회논문지
• /
• 제25권8호
• /
• pp.983-990
• /
• 2022

In this paper, we implemented a hierarchical encryption system using two-step phase-shifting digital holography(PSDH) technology based on XOR and scramble operations. The proposed encryption system is a system that authenticates access through the issuance of an encryption key for access to individual laboratories, department offices, and universities. In the encryption process, we proposed a double encryption method using XOR and scramble operation with digital technology and two-step phase-shifting digital holography with optical technology. In the two-step PSDH process, an new method of determining the reference wave intensity without measuring it by using random common object image gererated from digital encryption process was also proposed. In the decryption process, the process is performed in the reverse order of encryption process. And only when the various key information used in the encryption process is correct, the encrypted information can be decrypted, so that the user can access the desired place. That is, there is a feature that can hierarchically control the space that can be accessed according to the type of key issued in the proposed encryption system. Through the computer simulation, the feasibility of the proposed hierarchical encryption system was confirmed.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.689-696
• /
• 2012

A small integral reactor SMART (System Integrated Modular Advanced ReacTor), being developed in Korea since late 1990s and targeted to obtaining a standard design approval by the end of 2011, is introduced. The design scope and level for design certification (DC) is well described in the U.S. NRC SECY documents published the early 1990s. However, the documents are valid for a one-step licensing process called a combined operating license (COL) by the U.S. NRC, while Korea still uses a two-step licensing process. Thus, referencing the concept of the SECY documents, we have established the design scope and level for the SMART DC using the contexts of the standard review plan (SRP). Some examples of the results and issues raised during our review are briefly presented in this paper. The same methodology will be applied to other types of reactor under development in Korea, such as future VHTR reactors.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제7회 단조 심포지엄
• /
• pp.85-91
• /
• 2002

Of all the many types of machine elements which exist today, gears are among the most commonly used. Many researches have been done to manufacture helical gears by cold forging and extrusion. Although cold forging and extrusion were applied to some bevel, spur, and helical gears, problems in connection with reducing forming load and tool life still make it difficult for the related methods to be commercialized. In this study, focusing on reducing load in forming helical gears, extrusion of helical gears by a two-step process is proposed. The process is composed of an extrusion step of spur gears used as preform and a torsion step of the preform to make helical gears. Upper-bound analysis for the two-step process is performed and compared with results of experiments. The newly proposed method can be used as an advanced forming technique to remarkably reduce the forming load and replace the conventional forming process of helical gears.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.824-828
• /
• 2002

Of all the many types of machine elements which exist today, gears are among the most commonly used. Many researches have been done to manufacture helical gears by cold forging and extrusion. Although cold forging and extrusion were applied to some bevel, spur, and helical gears, problems in connection with reducing forming load and tool life still make it difficult for the related methods to be commercialized. In this study, focusing on reducing load in forming helical gears, extrusion of helical gears by a two-step process is proposed. The process is composed of an extrusion step of spur gears used as preform and a torsion step of the preform to make helical gears. Upper-bound analysis for the two-step process is performed and compared with results of experiments. The newly proposed method can be used as an advanced forming technique to remarkably reduce the forming load and replace the conventional forming process of helical gears.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.432-435
• /
• 1996

The performance of one-column isothermal PSA process is assessed by dynamic simulator, gPROMS. The four-step and five-step processes are compared. A five-step process is employed in order to show the effect of the addtional cocurrent depressurization step on the four-step PSA process. Two processes parameters, purity and recovery of SO$_{2}$ are used for the performance comparison. The results of dynamic simulation show that four-step process is superior to five-step process in recovery, but not in purity.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.868-873
• /
• 2011

In this study, the fabrication of ultra fine grained Mo bulk was conducted. $MoO_3$ nanopowders were prepared by a high energy ball-milling process and then reduced at the temperature of $800^{\circ}C$ without holding time in $H_2$ atmosphere. The particle size of Mo nanopowder was ~150 nm and grain size was ~40 nm. The two-step process was employed for the sintering of Mo nanopowder to obtain fine grain size. The densification over 90% could be obtained by the two-step sintering with a grain size of less than 660 nm. For higher density, modified two-step sintering was designed. 95% of theoretical density with the grain size of 730 nm was obtained by the modified two-step sintering.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.555-556
• /
• 2006

In this paper, we have proposed a novel process using two-step electron beam lithography to fabricate 20 nm T-gates for high performance MODFETs. Two-step lithography reduces electron forward scattering by defining the foot on a thin (100 nm) bottom-layer of polymethyl methacrylate (PMMA) at the second step, the T-gate head having been developed at the first step. Adopting a low temperature development technique for the second step reduces the detrimental effect of head exposure on foot definition. We have shown that 20 nm T-gate can be patterned with this process.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.83-87
• /
• 2017

A multi-step warm forging process for subminiature screws is investigated. Due to the low formability of Titanium alloys, bit forming of Titanium screws is difficult by cold forging. In order to overcome this low formability of Titanium alloys, two candidate processes, i.e., multi-step forging and warm forging are introduced. First, a multi-step (two-step) forging process is investigated. The punch shape and stroke of forging during the first step is designed via various analyses. Finally, the bit formability is investigated at different forging temperatures. Analyses are carried out for two-step forging at various temperatures and the formability under these thermal conditions is compared.