• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.1-7
• /
• 2015

Most of chloride diffusion models based on finite difference method (FDM) could not express the diffusion in horizontal direction at each elevation. To overcome these weakness, two dimensional chloride ion penetration model based on finite element method (FEM) to be able to combine various multi-physics simultaneously was suggested by introducing moving mesh technique. To avoid the generation of mesh being able to be distorted depending on the relative movement of water level to static concrete, a rectangular type of mesh was intentionally adopted and the total number of meshes was empirically selected. The simulated results showed that the contents of surface chloride decreased following to the increase of elevation in the top part of low sea level, whereas there were no changes in the bottom part of low level. In the DuraCrete model, the diffusion coefficient of splashed zone is generally smaller than submerged zone, whereas the trend of Life365 model is reverse. Therefore, it could be understood that the developed model using moving mesh technique effectively reflects $DuraCrete^{TM}$ model rather than $Life365^{TM}$ model. In the future, the model will be easily expanded to be combined with various multi-physics models considering water evaporation, heat of hydration, irradiation effect of sun and so on because it is based on FEM.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1902-1912
• /
• 2024

This paper presents results from system-level modeling of a water-based reactor cavity cooling system using RELAP5-3D. The computational model is benchmarked with experimental data from a half-scale RCCS test facility at Argonne National Laboratory. The model prediction is first compared with a two-phase oscillatory baseline experimental case where mixed accuracy is obtained. The model shows reasonable prediction of mass flow rate, pressure, and temperature but significant overprediction of void fraction. The model prediction is then compared with a fault case where the inlet of the risers is gradually reduced using a throttling valve. As the valve is closed, the model is able to predict some major flow phenomena observed in the experiment such as the dampening of oscillations, the reintroduction of oscillations, as well as boiling, flashing, and geysering in the risers. However, the timeline of these events are not well captured by the model. The model is also used to investigate the evolution of flow regime in the chimney. This work highlights that the semi-empirical constitutive relations used in RELAP-3D could have a strong influence on the accuracy of the model in two-phase oscillatory flows.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.17-22
• /
• 2008

Construction project have extremely high risk in the process of construction owing to unexpected event, like as design amendment. As a result, owner have to endure enormous extra-cost to control the risk and continue to the project having more higher uncertainty. Also, if the structure is completed, it is needed that the structure is protected and maintained continuously during life cycle time to satisfying original aim of structure itself. LCC analysis to calculate cost of structure alternatives divides into two stage, one is design_LCC and the other is maintenace_LCC. But two stages all is needed in the transition deterioration model to calculate more reasonable LCC analysis. This paper developed the model using analysis of FMS contents and survey from professional about Prestressed concrete beam girder bridge(PC Beam bridge)in railway. The model is focused in project level of PC beam because any condition state information for element level analysis can not get up. This paper is intended to use the developed model in LCC analysis of PC Beam bridge in railway and constitute the foundation to perform more deep study in the near future.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.574-579
• /
• 2000

In this study. an off-design performance prediction program for centrifugal pumps is developed. To estimate the losses in an impeller flow passage, two-zone model and two-element in series(TEIS) model are used. At impeller exit. the mixing process occurs with an increase in entropy. In two-zone model. there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller was calculated by using TEIS model. While internal losses in an impeller an automatically estimated by using the above models, some empirical correlations far estimating external losses. far example, disk friction loss, recirculation loss and leakage loss are used. In order to analyze the vaneless diffuser flow. the momentum equations for the radial and tangential directions are used and solved together with continuity and energy equations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.301-304
• /
• 1997

Two options arising during implementation of an advanced model-based control system on a process with low-level loops are discussed. Strengths and deficiencies of the options are examined and methods to overcome the deficiencies are proposed. Simulation results of a CSTR and distillation column are presented to demonstrate the performance improvements.

• 영어어문교육
• /
• 제16권4호
• /
• pp.153-184
• /
• 2010

On the bases of the 5 principles and the 4 criteria for designing and developing of the listening and the reading test of National English Ability Test (NEAT), this study presents Item-Types Decision-Making Model as a blueprint for designing and constructing the two tests. It sets up the criteria for validating item types, designs a modular type of test specifications, constructs an item-types bank, and specifies a complementary type of test specifications of the two tests. To gather all these threads up, it constructs Item-Types Decision-Making Model which consists of such components as the item-type pool, the validity criteria and the procedures of testing item types, the item-types bank, the modular and the complementary type test specification. Thus, it shows how the Model works in developing and constructing the two level-differentiated listening and reading tests (the 2nd and the 3rd rank) of NEAT. Finally, it discusses some implications and applications of the Model to the two level-differentiated tests (the A and the B type) of 2014 CSAT (College Scholastic Ability Test) systems, National Assessment of Educational Achievement (NAEA), and classroom testing. In conclusion, Item-Types Decision-Making Model functions as a testing template in an item development system and as a matrix in an item-types bank system.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.803-812
• /
• 2000

In this paper we introduce a model based centralized hierarchical controller for cooperative team of soccerplaying multiple mobile robots. The hierarchical controller is composed of high-level and low-level controllers. Using the coordinates information of objects from the vision are simple models of multiple mobile tobots on the playground. Subsequently, the high level controller selects and action model corresponding to the perceived state transition model and generates subgoal and goal-velocity, from which the low level controller generates trajectory of each wheel velocity of the robot. This two layered simplicity. The feasubility of the control strategy has been demonstrated in an implementation for real soccer games at a MiroSot league.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.107-120
• /
• 2019

Reservoir water level data identify the current water storage of the reservoir, and they are utilized as primary data for management and research of agricultural water. For the reservoir storage management, Korea Rural Community Corporation (KRC) installed water level stations at around 1,600 agricultural reservoirs and has been collecting the water level data every 10 minutes. However, various kinds of outliers due to noise and erroneous problems are frequently appearing because of environmental and physical causes. Therefore, it is necessary to detect outlier and improve the quality of reservoir water level data to utilize the water level data in purpose. This study was conducted to detect and classify outlier and normal data using two different models including the threshold model and the artificial neural network (ANN) model. The results were compared to evaluate the performance of the models. The threshold model identifies the outlier by setting the upper/lower bound of water level data and variation data and by setting bandwidth of water level data as a threshold of regarding erroneous water level. The ANN model was trained with prepared training dataset as normal data (T) and outlier (F), and the ANN model operated for identifying the outlier. The models are evaluated with reference data which were collected reservoir water level data in daily by KRC. The outlier detection performance of the threshold model was better than the ANN model, but ANN model showed better detection performance for not classifying normal data as outlier.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.237-240
• /
• 2008

Numerical Analysis for exchanging seawater experiment is carried out in Do-Jang fish port. The change of tidal velocity and water level is derived by the two-dimensional nonlinear shallow-water numerical model. To calculate exchange rate of seawater with the change of tidal velocity and water level, a two-dimensional numerical model is employed which governing equations are Fokker-Plank equations. The calculated exchange rates of each time are described in tables and figures.

• 한국광학회지
• /
• 제17권4호
• /
• pp.305-311
• /
• 2006

우리는 포화흡수 분광에서 이광자 결맞음 효과를 고려한 7준위 원자 모델을 제안하고 이를 이용하여 Nakayama이론으로 설명할 수 없었던 레이저의 세기에 따른 스펙트럼의 변화와 일부 교차공진선에서 Nakayama이론과의 불일치 현상을 설명하였다. 우리는 Zeeman 부준위에서 펌프광과 조사광의 편광이 $\pi-\pi$일 때를 모두 고려하여 상준위 2개 하준위 5개로 구성된 7준위의 모델을 만들었고, $^{85}$Rb원자의 5S$_{1/2}$ - 5P$_{1/2}$ 전이선에 대하여 4준위 Nakayama이론과 7준위 원자 모델을 비교하였다. 또한 레이저의 세기에 따른 포화흡수 분광 스펙트럼과 7준위 원자모델로 계산한 이론결과가 잘 일치함을 보였다.