• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.330-332
• /
• 2006

In this paper, sun tracking system using Sun position sensor is proposed, the sun tracking system designed as which raises the efficiency of solar power generation. It design the structure being simple and it develops the system which is economical efficiency. It develops the hazard technique such as location tracking method of the sun which uses the sensor and to use the motor solar cell module movement. The Sun tracking system makes the drive in order to do with one axis and to use the sensor and to know in order to put out, the location of the sun and it makes. To make the solar location tracking sensor where the structure is simple it used two solar cells.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.317-319
• /
• 2006

This paper proposes a fault location algorithm for two-parallel transmission line in the case of single line-to-ground fault Proposed algorithm is using voltage and current measured in the sending-end. The fault distance is simply determined by solving a second order polynomial equation due to the direct circuit analysis. The simulations by PSCAD/EMTDC have demonstrated the accuracy and effectiveness of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.21-23
• /
• 2006

As a general rule for evaluating dependability of a system, reliability is commonly considered which barely rays attention to the system behavior, however the estimation is based on the assumption of a fault-frost system, which may be impracticable and inaccurate especially for complicated system. This paper introduces a security and dependability integrated approach to analyze the availability of a fault-active system both from dependability and security points of view. Two fault modes involved are discussed about the impairment to the system reliance. The approach can be well applied to estimate and quantify the attribute of system robustness with the help of Markov chain process, which is good at solving status related problem. The comparison result between dual system and IEC61850-based almighty backup system is shown to sup-port the suggested approach.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.77-86
• /
• 2006

A new method in robot path generation is presented using an analysis of the characteristics of multi-robot collision avoidance. The research is based on the concept of the collision map, where the collision between two robots is presented by a collision region and a crossing curve TLVSTC (traveled length versus servo time curve). Analytic collision avoidance is considered by translating the collision region in the collision map. The 4 different translations of collision regions correspond to the 4 parallel movements of the actual original robot path in the real world. This analysis is applied to path modifications where the analysis of collision characteristics is crucial and the resultant path for collision avoidance is generated. Also, the correlations between the translations of the collision region and robot paths are clarified by analyzing the collision/non-collision areas. The influence of the changes of robot velocity is investigated analytically in view of collision avoidance as an example.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2311-2318
• /
• 2005

Progress in the LCD industries has been very rapid. Therefore, their manufacturing lines require larger LCD glass-handling robots and more precise path control of the robots. In this paper, we present two practical advanced algorithms for high-precision path generation of an LCD glass-handling robot. One is high-precision path interpolation for continuous motion, which connects several single motions and is a reliable solution for a short robot cycle time. We demonstrate that the proposed algorithm can reduce path error by approximately 91% compared with existing algorithms without increasing cycle time. The second is real-time static deflection compensation, which can optimally compensate the static deflection of the handling robot without any additional sensors, measurement instruments or mechanical axes. This reduces vertical path error to approximately 60% of the existing system error. All of these algorithms have been commercialized and applied to a seventh-generation LCD glass-handling robot.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.502-507
• /
• 2010

Event driven service (EDS) is one of such services administrating different functions of multiple service providers according to the user situation. This paper first describes the service model of EDS, a User-centric Service for multiple service provider environments over the next generation networks. The multiple provider environments stimulates the unified identifier management, namely unified identification (U-ID), to enable users to be provided network services without awareness of multiple providers. Combining these two concepts, i.e., EDS and U-ID, the designed structure of EDS with U-ID and related procedures are given. Finally, the implementation results tested on Korea Advanced Research Network (KOREN) are described.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.533-535
• /
• 2002

In Korea, power requirement has been increasing. But the large generation unit is hardly installed because of economic and environment problem. Therefore, the concern of dispersed generation system(DGS) is growing. The power distribution system is generally operated with radial type. The protection system is composed of one directive source. But power distribution system inserted DGS changes it to two directive source system. Therefore, the insertion of DGS has the problem of protection coordination. In this paper, we argue fault current affected by interconnected DGS. We analyze fault current flow affected by DGS placement. Then, we find protective coordination problem. Consequently, we study advance point for protection scheme of power system interconnected DGS.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1149-1152
• /
• 2003

Now a days, many different kinds of display technologies such as Liquid Crystal Display (LCD), Organic Light Emitting Diode (OLED), and Liquid Crystal On Silicon (LCOS) are designed. And these display technologies will be used in many application products like High Definition Televisions (HDTVs) or mobile devices. In this paper, pattern generation circuit for display test is proposed. The proposed circuit will be embedded in the control circuit of display chip. Two differenct kinds of patterns is generated by the circuit. One is block pattern for color test, and the other is line pattern for pixel test. The shape of test pattern is determined by the values of registers in pattern generation circuit. The circuit is designed using Verilog HDL RTL code.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.100-106
• /
• 1992

In this pape, we designed and implemented a hardware accelerator for the generation of bit map font from Hangul outline font description for LBP (Laser Beam Printer) and screen applications Whole system was implemented as a double size PC/AT application board which consists of processing bolck and display block. The processing block has a master processor (MC68000)and two slave processors which are MC56001 and KAFOG chip responsible for the short vector generation. In the display block, TMS34061 was used for monitor display and GP425 was used for LBP print out. The resolution of the monitor is 640$\times$480 and that of LBP is 2385$\times$3390. The current system called KHGB90-B generates about 100 characters per second where each character consists of 32$\times$32 bits

• International Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.89-103
• /
• 2012

Using a life course framework, we compare and contrast the processes of acculturation for first- and second-generation Korean immigrant fathers in the United States. In-depth life history interviews were conducted with 20 first-generation and 15 second-generation fathers in the Midwest. With a modified grounded theory approach of constant comparison, we first explored how these fathers developed their identities in the midst of cultural and social transitions. These men's identity construction was shaped by socio-economic statuses and accessibility to cultural resources, with a marked shift over time toward integration of Korean and American identities. We then examined how these identities informed the men's socialization of their children, and the children's socialization of their parents.