• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.343-346
• /
• 1998

The generation of pretilt angle in nematic liquid crystal (NLC) and electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique P-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about 2.5$^{\circ}$with P-polarized UV light irradiation of 20$^{\circ}$on PI-3 surface at 20 min.; However pretilt angle of about 0.5$^{\circ}$are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with P-polarized UV light irradiation of 20$^{\circ}$on PI-1 surface at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau$$\sub$d/ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1261-1263
• /
• 1998

In this paper, we obtained that the monodomain alignment of nematic liquid crystal (NLC) increases with increasing irradiation time with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of NLC is obtained in a cell with normally LPUV light irradiated on PI surface at 30 min. and then oblique LPUV is secondly irradiated on PI surfaces rotated by $90^{\circ}$. The pretilt angle of NLC is generated about $2.5^{\circ}$ with oblique angle of $60^{\circ}$ and then decreased with increasing the oblique angle of IN light irradiation. It is considered that the pretilt angle of NLC is attributed to the photo-depolymerization of polymer with the oblique angle of UV light. The voltage-transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time of 60 min. were almost same in comparison with rubbing treated TN-LCD.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.162-167
• /
• 2010

We investigated the adsorption and desorption characteristics of benzene molecules on $Si(001)-2{\times}n$ surfaces using a variable-low temperature scanning tunneling microscopy. When benzene was adsorbed on a $Si(001)-2{\times}n$ surface at a low coverage, five distinct adsorption configurations were found: tight-binding (TB), standard-butterfly (SB), twisted-bridge, diagonal-bridge, and pedestal. The TB and SB configurations were the most dominant ones and could be reversibly interconverted, diffused, and desorbed by applying an electric field between the tip and the surface. The population ratios of the TB and SB configurations were affected by the benzene coverage: at high coverage, the population ratio of SB increased over that of TB, which was favored at low coverage. The desorption yield decreased with increasing benzene coverage and/or density of vacancy defect. These results suggest that the interaction between the benzene molecules is important at a high coverage, and that the vacancy defects modify the adsorption and desorption energies of the benzene molecules on Si(001) surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.178-181
• /
• 2001

The electro-optical (EO) characteristics for the twisted-nematic (TN)-liquid crystal display (LCD) photo-aligned with polarized UV exposure on various blending photopolymer surfaces were investigated. Excellent LC alignment and voltage-transmittance (V-T) characteristics for TN-LCD photo-aligned with polarized UV exposure of normal incidence on the blending Photopolymer (polyimide (PI) + PM4Ch (poly(4-methacryloyloxy chalcone))) surface containing chalcone group can be achieved. The EO performances of the TN-LCD photo-aligned on the blending photopolymer can be improved due to the photosensitivity by long side chain of the photopolymer.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.731-735
• /
• 2002

Electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure on the poly［4- (fluorocinnamate) phenylmaleimide](PFCPMI) surfaces using a new photodimerization method were investigated. For a new UVLPH (UV linearly polarized during heating) photodimerization method, the photopolymer layers were exposed by linearly polarized UV dichroic polarizer without a specific UV filter during heating at $150^{\circ}C$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN-LCD with UV exposure on the PFCPMI surface for 10 min using the UVLPH photodimerization method was observed. For response time measurement, the transmittance characteristics of the photoaligned TN-LCD using the UVLPH photodimerization method on the photopolymer surface was better than that of the photoaligned TN-LCD using the UVLP photodimerization method under a room temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1388-1390
• /
• 1998

In this paper, we investigated the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by transcription alignment method on polyimide(PI) surface with side chain. The LC alignment produced by the transcription alignment method is attributed to a memory effect of the NLC on PI surfaces. We observed that the pretilt angle of NLC is generated about $3.7^{\circ}$ with transcription alignment on PI surface. Also, we obtained the good electro-optical(EO) performance of twisted nematic(TN)-liquid crystal display(LCD) by transcription alignment method on PI surface.

• 대한기계학회논문집A
• /
• 제31권9호
• /
• pp.924-933
• /
• 2007

An impeller is a important part of turbo-machinery. It has a set of twisted surfaces because it consists of many blades. Five-axis machining is required to produce a impeller because of interference between tool and workpiece. It can obtain good surface integrity and high productivity. This paper proposes finish cutting method for machining impeller with 5-axis machining center and optimization of cutting condition by response surface method. Firstly, cutting methods are selected by consideration of operation characteristics. Secondly, response factors are determined as cutting time and cutting error for prediction of productivity. Experiments are projected by central composite design with axis point. Thirdly, regression linear models are estimated as single surface in the leading edge and as dual surface in the hub surface cutting. Finally, cutting conditions are optimized.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.73-77
• /
• 2005

In this study, we investigated response characteristics of liquid crystal display (LCD) with different operating mode of nematic liquid crystals (NLCs) such as 45 $^{circ} twisted nematic (TN), 67.3 $^{circ} TN and electrical controlled birefringence (ECB) on the rubbed polyimide (PI) surface with side chains. The pretilt angles generated on polyimide surfaces of the three kinds of LCD operating modes were about 12 $^{circ} that was higher than those of conventional TN-LCOs. Also, the Electro-optical (EO) performance of these LCOs showed stable condition. Low transmittance of the 45 $^{circ} TN and 67.3 $^{circ} TN cell on the rubbed PI surface were measured by using low cell gap d. The fast response time in ECB cell among the three kinds of LCD operating modes was achieved. Also, thermal ability of fast 90 $^{circ} TN-LCD was investigated. The threshold voltage and the response time of thermal stressed TN-LCOs showed the same performances on no thermal stressed TN-LCOs. There was little change of value in these TN cells. However, the transmittances of TN-LCOs on the rubbed PI surface decreased while increasing thermal stress time. Therefore, the thermal stability of TN-LCD was decreased by the high thermal stress for the long duration.

• 대한치과교정학회지
• /
• 제41권6호
• /
• pp.447-453
• /
• 2011

Objective: We compared the shear bond strength (SBS) of lingual retainers bonded to bovine enamel with three different resins using direct and indirect methods. Methods: Both ends of pre-fabricated twisted ligature wires were bonded to bovine enamel surfaces using Light-Core, Tetric N-Flow, or Transbond XT. Phosphoric acid-etched enamel surfaces were primed with One-Step prior to bonding with Light-Core or Tetric N-Flow. Transbond XT primer was used prior to bonding with Transbond XT. After 24 hours in water at $37^{\circ}C$, we performed SBS tests on the samples. We also assigned adhesive remnant index (ARI) scores after debonding and predicted the clinical performance of materials and bonding techniques from Weibull analyses. Results: Direct bonding produced significantly higher SBS values than indirect bonding for all materials. The SBS for Light-Core was significantly higher than that for Tetric N-Flow, and there was no significant difference between the direct bonding SBS of Transbond XT and that of Light-Core. Weibull analysis indicated Light-Core performed better than other indirectly bonded resins. Conclusions: When the SBS of a wire retainer is of primary concern, direct bonding methods are superior to indirect bonding methods. Light-Core may perform better than Transbond XT or Tetric N-Flow when bonded indirectly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1765-1767
• /
• 1999

We synthesised a photo-alignment material of PM4Ch (poly(4-methacryloylloxychalcone)). The electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-liquid crystal display (LCD) with linearly polarized ultraviolet (UV) light irradiation on PM4Ch surface were investigated. The uniform alignment of NLC with polarized UV light irradiation on PM4Ch surface was measured. Also, We had The excellent voltage-transmittance characteristics of photo-aligned TN-LCD. The low threshold voltage of photo-aligned TN-LCD was measured. Moreover, the fast response time of photo-aligned TN-LCD on PM4Ch was successfully achieved. Finally The reduction DC voltage of photo-aligned TN-LCD decreases with increasing the UV light irradiation time on photo-dimerized PM4Ch surface.