• 한국진공학회지
• /
• 제5권4호
• /
• pp.348-353
• /
• 1996

CdS/ITO/glass 기판위에 다결정 CdTe 박막을 진공증착법으로 제조한 후 급속열처리하여 열처리 온도와 가스분위기가 CdTe의 박막의 물성과 전지특성에 미치는 효과를 연구하였다. $450^{\circ}C$에서 $550^{\circ}C$까지 공기중 급속열처리한 경우 박막은 EDX 조성분석결과 화학양론비를 유지하였고 표면성분비는 Cd-rich 상태였으나 전처리후 저저항 contact 제조에 유리한 Te-rich 상태로 변화되었다. TEM과 micro-EDX 결과 급속열처리 전후 모두 CdTe는 주상정구조가 관찰되었고 열처리동안 CdTe내로 확산된 S의 양이 로열처리와 비교하여 매우 적음을 알 수 있었다. 급속열처리 온도가 가스분위기 조건 중 공기 중에서 $550^{\circ}C$ 열처리하였을 때 가장 우수한 태양전지효율을 나타내었다.

• 한국융합학회논문지
• /
• 제9권2호
• /
• pp.295-302
• /
• 2018

본 연구는 국내 프로야구단의 CSR활동에 대한 팬들의 지각이 구단평판, 구단동일시 및 모기업이미지와 어떠한 관계를 형성하고 있는지를 실증적으로 규명하는데 목적이 있다. 이를 위해 수도권지역 프로야구단인 LG트윈스, 두산 베어스, SK 와이번스 및 KT 위즈의 홈팀 팬 277명을 대상으로 설문조사를 실시하여 다음과 같은 결과를 얻었다. 첫째, 프로야구단의 CSR활동은 구단평판에 긍정적인 영향을 미치고 있는 것으로 나타났다. 둘째, 프로야구단의 CSR활동은 구단동일시에 긍정적인 영향을 미치고 있는 것으로 나타났다. 셋째, 구단평판은 프로야구단 모기업이미지에 긍정적인 영향을 미치고 있는 것으로 나타났다. 넷째, 구단동일시는 프로야구단 모기업이미지에 긍정적인 영향을 미치고 있는 것으로 나타났다.

• 한국결정학회지
• /
• 제6권1호
• /
• pp.14-26
• /
• 1995

Hot Filament CVD법에 의해 증착된 다이아몬드 박막의 기판온도와 증착시간 변화에 따르는 표면형상 변화를 관찰함으로써 그 증착기구를 규명하고자 하였다. 기판온도가 낮을 경우에는 비정질 탄소 및 DLC(diamond like carbon)가 증착되고 기판온도가 증가함에 따라 사가형의 (100)명으로 구성된 입자를 가지는 다이아몬드 박막이 증착되었으며 매우 높은 기판온도에서는 (100)명과 (111)명으로 이루어진 결정외형을 가지는 입자들로 구성되는 다이아몬드 박막이 증착되었다. 다이아몬드 박막의 (100) 우선배향성은 증착시의 비교적 높은 과포화도에 기인하는 것으로 생각되며, 이러한 (100) 우선배향성을 가지는 박막은 결정면내에 twin을 함유하지 않으므로 단결정박막으로의 성장가능성이 크다. 기판온도가 증가해도 다이아몬드 박막의 입자크기는 증가하지 않았으며 시간에 따른 증가양상도 온도에 관계없이 비슷한 경향을 보였다. 그러나 필라멘트 온도가 일정할 때 다이아몬드 박막의 핵 밀도는 기판온도가 높을수록 증가하였으며 시간에 따른 증가폭도 기판온도가 높을수록 더 크게 나타났다.

• Clinical and Experimental Reproductive Medicine
• /
• 제38권1호
• /
• pp.53-60
• /
• 2011

Objective: This study was carried out to compare the clinical outcome of elective single cleavage-embryo transfer (eSCET) to that of elective single blastocyst-embryo transfer (eSBET) in human IVF-ET. Methods: This study was a retrospective study which analyzed for 614 women who visited the Daegu Maria Clinic from August 2008 to December 2009. All were under 37 years old and had more than 8 mm of endometrial thickness on the day of hCG administration and at least one good quality embryo on day 3. The eSCETs were performed on day 3 (n=450) and the eSBETs were conducted on day 5 (n=164). Results: The numbers of retrieved oocytes, fertilized oocytes, and day 3 good quality embryos were significantly lower in the eSCET group (12.1${\pm}$6.0, 8.2${\pm}$4.6, and 4.2${\pm}$3.1, respectively) compared to the eSBET group (16.7${\pm}$7.2, 12.1${\pm}$5.0, and 8.5${\pm}$4.5, respectively; p<0.001). However, the clinical pregnancy, implantation, on-going pregnancy, and live birth rates of the eSCET group (46.7, 46.9, 40.0, and 36.7%, respectively) were not statistically different from those of the eSBET group (51.2, 51.8, 45.1, and 43.9%, respectively; p=0.318, 0.278, 0.254, and 0.103, respectively). Conclusion: These results suggested that elective single embryo transfer should be performed regardless of the developmental stage to women less than 37 years old who had more than 8 mm of endometrial thickness on the hCG administration day and at least one good quality embryo on day 3 in order to reduce the twin pregnancy rate without reducing the whole pregnancy rate.

• Clinics in Shoulder and Elbow
• /
• 제19권1호
• /
• pp.15-19
• /
• 2016

Background: To investigate how many rookie pitchers suffered from injuries while playing in the amateur league without guidelines for prevention of excessive pitching, we analyzed their amateur pitching patterns based on the pitch count, use of breaking balls, and pitches during winter camp. Methods: Forty-one rookie pitchers who graduated from high school or university in 2013 and joined professional baseball teams. Participants were interviewed by a trainer using our questionnaire. Injury inclusion criteria were 1) history of shoulder surgery, 2) history of elbow surgery, 3) shoulder pain requiring treatment, and 4) elbow pain requiring treatment. Results: Mean number of pitches per game and warm-up pitches for practice was 84.5 pitches (range, 15 to 130 pitches) and 16.4 pitches (range, 2 to 210 pitches), respectively. Mean number of pitches during the last year was 906.9 (range, 80 to 2,000). Mean number of maximal pitches was 127 pitches (range, 50 to 210 pitches). Fourteen pitchers had pitched over 150 pitches. Twenty-seven pitchers (65.9%) had pitched in spite of enduring pain. During winter training (mean 1.8 months), mean number of pitches per day was 162.5 pitches, and 20 pitchers (48.8%) had practiced pitching excessively despite the cold weather. Twenty-six rookies (63.4%) had shoulder pain or history of shoulder surgery, and 31 pitchers (75.6%) had elbow pain or history of elbow surgery. Only four participants (9.8%) did not have pain and history of surgery. Conclusions: For young baseball pitchers, guidelines for prevention of excessive pitching and for regulating the winter training program may be needed.

• 대한치과교정학회지
• /
• 제51권6호
• /
• pp.407-418
• /
• 2021

Objective: To investigate differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and Class II malocclusions. Methods: Forty Korean adult twin pairs were divided into Class I (C-I) group (0° ≤ angle between point A, nasion, and point B [ANB]) ≤ 4°; mean age, 40.7 years) and Class II (C-II) group (ANB > 4°; mean age, 43.0 years). Each group comprised 14 monozygotic and 6 dizygotic twin pairs. Thirty-three cephalometric variables were measured using lateral cephalograms and were categorized as the anteroposterior, vertical, dental, mandible, and cranial base characteristics. The ACE model was used to calculate heritability (A > 0.7, high heritability). Thereafter, principal component analysis (PCA) was performed. Results: Twin pairs in C-I group exhibited high heritability values in the facial anteroposterior characteristics, inclination of the maxillary and mandibular incisors, mandibular body length, and cranial base angles. Twin pairs in C-II group showed high heritability values in vertical facial height, ramus height, effective mandibular length, and cranial base length. PCA extracted eight components with 88.3% in the C-I group and seven components with 91.0% cumulative explanation in the C-II group. Conclusions: Differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and II malocclusions might provide valuable information for growth prediction and treatment planning.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.112-120
• /
• 2011

The out-of-phase thermo-mechanical fatigue (OP TMF) in a <001> oriented single crystal nickel-based superalloy CMSX-4 has been studied. OP TMF life was less than a half of low cycle fatigue(LCF) life in spite of a small hysteresis loop area of OP TMF compared to that of LCF. The failure was caused by the initiation of a crack at the oxide-layered surface followed by its planar growth along the <100> ${\gamma}$ channel in both LCF and OP TMF. However, deformation twins appeared near the major crack of OP TMF. The multiple groups of parallel twin plates on {111} planes provided a preferential path for crack propagation, which caused a significant decrease in OP TMF life. Additionally, the analysis on the surface crack morphology revealed that the tensile strain at the minimum temperature of OP TMF was found to accelerate the crack propagation.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.931-937
• /
• 2012

The microstructure of Cu-15 wt%Ag composites fabricated by equal channel angular pressing (ECAP) with intermediate heat treatment at $320^{\circ}C$ was investigated by transmission electron microscopy (TEM) observations. Ag precipitates with a thickness of 20-40 nm were observed in the eutectic region of the Cu-15 wt%Ag composite solution treated at $700^{\circ}C$ before ECAP. The Cu matrix and Ag precipitates had a cube on cube orientation relationship. ECAPed composites exhibited ultrafine-grained microstructures with the shape and distribution dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the Cu and Ag grains were elongated along the shear direction and many micro-twins were observed in elongated Cu grains as well as in Ag filaments. The steps were observed on coherent twin boundaries in Cu grains. For route Bc in which the sample was rotated by 90 degrees after each pass, a subgrain structure with misorientation of 2-4 degree by fragmentation of the large Cu grains were observed. For route C in which the sample was rotated by 180 degrees after each pass, the microstructure was similar to that of the route A sample. However, the thickness of the elongated grains along the shear direction was wider than that of the route A sample and the twin density was lower than the route A sample. It was found that more microtwins were formed in ECAPed Cu-15 wt%Ag than in the drawn sample. Grain boundaries were observed in relatively thick and long Ag filaments in Cu-15 wt%Ag ECAPed by route C, indicating the multi-crystalline nature of Ag filaments.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.995-1000
• /
• 2011

The microstructure of Cu-24 wt.%Ag filamentary nanocomposite fabricated by a thermo-mechanical process has been investigated by transmission electron microscopy (TEM) observations. This study is focused on the stability of Ag filaments formed by cold drawing; the effects of thermal treatment on the precipitation behavior and distribution of Ag-rich precipitates were also investigated. The Ag filaments elongated along the <111> orientation were observed in Cu-rich ${\alpha}$ phase of the as-drawn specimen and the copper matrix and the silver filament have a cube on cube orientation relationship. Annealing at temperatures lower than $200^{\circ}C$ for the as-drawn specimen caused insignificant change of the fibrous morphology but squiggly interfaces or local breaking of the elongated Ag filaments were easily observed with annealing at $300^{\circ}C$. When samples were annealed at $400^{\circ}C$, discontinuous precipitation was observed in supersaturated Cu solid solution. Ag precipitates with a thickness of 7-20 nm were observed along the <112> direction and the orientation relationship between the copper matrix and the Ag precipitates maintained the same orientation relationship in the as-drawn specimen. The interface between the copper matrix and the Ag precipitates is parallel to {111} and micro-twins were observed in the Ag precipitates.

• 한국BIM학회 논문집
• /
• 제9권4호
• /
• pp.51-61
• /
• 2019

In the general manufacturing sector, prototyping used to reduce the risks that can arise with new conceptual products. However, in AEC area, it does not mass-produce a building, so the prototype itself becomes a building. Therefore, it is challenging to have prototyping of the same scale as the real thing, and the prototyping process in architecture is very inefficient. The prototyping process in the design stage typically assumes making a scaled model, partial model, or digital model. However, it is difficult for these models to correspond to the actual building and the environment of time and space such as scale, material, environment, load, physical properties and deformation, corrosion, etc., unlike the actual building. When using the digital twin concept in the prototyping process, it is possible to measure performance from the design stage to the operation stage. The digital twin was found by a method for monitoring based on physical twins and real-time linkage in the operation stage. Therefore, if the digital twin concept is applied at the design stage, it is possible to predict performance using not only current performance but also history information using real-time information. In order to apply the digital twin concept to the prototyping design process, we analyze the theoretical considerations and the prototyping design process of the digital twin, analyze the cases and research results where the prototyping design was applied, Provide an applied prototyping design process. The proposed process is tested through a pilot project and analyzed for potential use.