• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.9-18
• /
• 2001

대스팬 철골구조물의 지붕구조로서 강관트러스가 많이 사용되고 있다. 강관트러스는 타 단면(H, L형강 등)에 비하여 구조역학적인 측면에서 유리하다고 할 수 있다. 그러나 지관의 압축력에 의하여 격점부에는 국부좌굴이 발생하고 이로 인하여 구조체 전체의 내력이 격점부의 지배를 받게 된다. 또한 강관 격점부에서의 내력 및 변형 성상은 거동이 복잡하여 정확한 거동을 예측하기 어려울뿐만 아니라 해석적으로 정밀해를 구하기 어렵다. 이 연구에서는 T형 격점부를 대상으로 지관과 주관의 직경비(d/D) 주관경과 두께비(D/T)에 관한 변수를 설정하여 일련의 실험을 진행하고 기초하여 단순한 링해석법을 이용하여 항복하중에 관한 실용해를 제안하였다. 또한 부가적으로 각국에서 제안된 항복하중에 관한 기존의 연구결과와도 비교, 검토하였다.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.475-483
• /
• 2018

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

• Smart Structures and Systems
• /
• 제6권7호
• /
• pp.835-849
• /
• 2010

This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.617-631
• /
• 2022

To study the eccentric compressive performance of the basalt-fiber reinforced recycled aggregate concrete (BFRRAC)-filled circular steel tubular stub column, 8 specimens with different replacement ratios of recycled coarse aggregate (RCA), basalt fiber (BF) dosage, strength grade of recycled aggregate concrete (RAC) and eccentricity were tested under eccentric static loading. The failure mode of the specimens was observed, and the relationship curves during the entire loading process were obtained. Further, the load-lateral displacement curve was simulated and verified. The influence of the different parameters on the peak bearing capacity of the specimens was analyzed, and the finite element analysis model was established under eccentric compression. Further, the design-calculation method of the eccentric bearing capacity for the specimens was suggested. It was observed that the strength failure is the ultimate point during the eccentric compression of the BFRRAC-filled circular steel tubular stub column. The shape of the load-lateral deflection curves of all specimens was similar. After the peak load was reached, the lateral deflection in the column was rapidly increased. The peak bearing capacity decreased on enhancing the replacement ratio or eccentric distance, while the core RAC strength exhibited the opposite behavior. The ultimate bearing capacity of the BFRRAC-filled circular steel tubular stub column under eccentric compression calculated based on the limit analysis theory was in good agreement with the experimental values. Further, the finite element model of the eccentric compression of the BFRRAC-filled circular steel tubular stub column could effectively analyze the eccentric mechanical properties.

• 한국터널지하공간학회 논문집
• /
• 제5권4호
• /
• pp.401-409
• /
• 2003

최근 지속적으로 늘어나는 인구와 교통량의 증가로 인하여 도심지국토이용 및 차도가 포화상태가 되어 지하공간의 활용이 매우 절실하게 되었다. 이에 지하 운송수단 및 지하상가 등 지하구조물이 증가하게 되었으며, 공사로 인한 지상의 교통지연, 불량한 지반조건 등으로 인한 각종 안전사고, 주변환경의 훼손, 소음진동에 의한 수많은 민원 발생 등은 사회적인 문제점으로까지 비약되는 경우가 발생하고 있다. 따라서 본 연구에서는 이런 문제점등을 해결함과 동시에 기존 지히구조물 축조공법으로는 안정성을 확보할수 없는 열악한 지반조건에도 안전하고 경제적으로 지하 구조물을 시공할 수 있도록 N.T.R.공법을 수정 보완하였다. 기존의 터널굴착 공법에서 많은 문제점으로 나타난 천정 및 벽체부의 누수문제와 이로 인한 안전성감소, 그리고 장기적인 유지보수 문제 등 시공상의 여러 단점을 보완하여 국내실정에 적합한 N.T.R. (NEW TUBULAR ROOF)공법을 개발하게 되었다. 본 논문에서는 N.T.R.공법 적용 구조물에 대한 수치해석의 결과와 현장 계측자료를 토대로 N.T.R.공법의 특징, 시공방법 및 국내 지하공간개발 적용가능성에 대하여 정리하였다.

• Steel and Composite Structures
• /
• 제3권5호
• /
• pp.321-331
• /
• 2003

The paper presents the results of an experimental investigation conducted on welded tubular joints, that are employed in offshore platforms, to study the behaviour and strength of these joints under axial brace compression loading. The geometrical configuration of the joints tested were T and Y. The nominal diameter of the chord and brace members of the joint were 324 and 219 mm respectively. The chord thickness was 12 mm and the brace 8 mm. The tested joints are approximately quarter size when compared to the largest joints in the platforms built in a shallow water depth of 80 m in the Bombay High field. Some of the joints were actually fabricated by a leading offshore agency which firm is directly involved in the fabrication of prototype structures. Strength of the internally ring-stiffened joints was found to be almost twice that of the unstiffened joints of the same configuration and dimensions. Bending of the chord as a whole was observed to be the predominant mode of deformation of the internally ring-stiffened joints in contrast to ovaling and punching shear of the unstiffened joints. It was observed in this investigation that unstiffened joint was stiffer in ovaling mode than in bending and that midspan deflection of unstiffened joint was insignificant when compared to that of the internally ring stiffened joint. The measured midspan deflection of the unstiffened joint in this investigation and its relation with the applied axial load compares very well with that predicted for the brace axial displacement by energy method published in the literature. A comparison of the measured deflection and ovaling of the unstiffened joint was made with that published by the author elsewhere in which numerical prediction of both quantities have been made using ANSYS software package. The agreement was found to be quite good.

• 대한세포병리학회지
• /
• 제19권2호
• /
• pp.194-199
• /
• 2008

The recent WHO classification has recognized mucinous tubular and spindle cell carcinoma (MTSCC) as a distinct entity of renal cell carcinoma, exhibiting a mixed pattern of tubules and a surrounding spindle cell proliferation within a myxoid stroma, with low-grade nuclear features. A 51-year-old woman had an incidentally discovered renal mass. Radiologic examination revealed a large, well defined mass in the lower pole of the right kidney; a right radical nephrectomy was performed. Imprint cytologic smears from fresh surgical specimens showed cellular, cohesive clusters with thick, broad trabecular arrangements and branching structures. On high power fields, the tumor was composed of round-to-oval low-grade nuclei with vesicular chromatin and small nucleoli. The tumor cells had indistinct borders and pale, eosinophilic cytoplasm, In some areas, round-to-elongated tubular structures and spindle cell patterns were noted. Chronic inflammatory cell infiltration was noted, along with a mucinous back-ground and occasional psammoma bodies. Neither significant cytologic atypia nor mitosis was seen.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.223-230
• /
• 2009

본 연구는 다양한 직경-두께비와 콘크리트 강도를 고려한 콘크리트 충전강관의 휨 거동을 다루었다. 유한 요소 해석을 위하여 상용 프로그램 LUSAS를 사용하였으며, 충전 강관의 콘크리트와 강 사이의 부착면의 상세거동을 고려하기 위하여 조인트 요소를 적용하였다. 또한, 콘크리트와 강관의 비선형성을 고려하기 위하여 소성영역에서 증가된 응력을 사용한 콘크리트와 강의 응력-변형률 곡선을 사용하였다. 제안된 방법으로 구한 수치해석 결과는 등분포하중을 받는 강관의 하중-변위 곡선에 대한 실제 실험 결과와 잘 일치하였다. 몇 가지 매개변수 연구는 서로 다른 직경-두께비와 콘크리트 강도에 대하여 휨 영향을 받는 콘크리트 충전강관의 구조적 특성에 초점을 두었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.388-389
• /
• 2012

현재 해상풍력 발전 타워는 강구조로 제작되고 있으며, 발전용량의 증가에 따라 타워 구조체 또한 장대화 되는 추세이다. 강조조물의 특성상 좌굴에 취약하며, 장대화 됨에 따라 세장비가 증가하여, 좌굴 및 진동에 취약한 특성을 보이게 된다. 본 연구에서는 신형식 구조체인 이중관-콘크리트 합성 구조(DSCT; Double Skinned Composite Tubular)를 적용한 해상풍력 타워를 제시하고 요구 성능을 만족하는 최적 단면 설계를 제시하였다. 관은 섬유보강 합성수지 (FRP; Fiber Reinforce Polymer)와 강재를 적용한 경우를 고려하였으며, 모두 요구 성능을 만족하였다.

• 대한세포병리학회지
• /
• 제8권2호
• /
• pp.185-189
• /
• 1997

A sex cord tumor with annnular tubules is a relatively rare ovarian neoplasm. The cytologic findings from a fine needle aspiration biopsy of neck metastasis of a sex cord tumor with annnular tubules are described. The origin of the neck metastasis was the right ovary, and the tumor was diagnosed six years ago. The cytologic findings were characterized by tumor cells arranged in solid or follicular patterns. The tumor cells formed rosette-like or complex tubular structures with central rounded or coalesced hyaline materials. It was difficult to distinguish this tumor cytologically from granulosa cell tumor, thyroid follicular neoplasm, Sertoli-Leydig cell tumor, and Brenner tumor, but complex tubular structures were helpful in discriminating between these tumors.