• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.615-626
• /
• 2019

In this study, the applicability of PHC pile jointing method using rectangular steel tubular was studied. PHC pile joints are welded and bolt assembly. The bolt assembly method is a method that improves the various problems of welded joints. Numerical analysis and tests were conducted to analyze the applicability of the PHC pile jointing method using a rectangular steel tubular. The tests were carried out to test the material properties of the rectangular steel tubular material and the bending test of the pile joints. The numerical analysis was interpreted in the same conditons as the tests conditions. As a result, the material strength of each rectangular steel tubular could be used as a joint material. In the bending test, it was evaluated as a sTable material above the allowable stress of piles. In the numerical analysis results under the same conditions as the tests, it was possible to apply the pile joint material without exceeding the allowable stress of the material.

• 기술발표회
• /
• 통권2006호
• /
• pp.75-85
• /
• 2006

The project comprised the construction of the new oil pier and associated topside facilities and demolition of exiting south pier. The site is located approximately 33km south of Kuwait city at MAA refinery. The approach trestle and berth structures of the new oil pier were designed to be supported by steel tubular piles Total 2,480 numbers of piles(795 piles at Approach Trestle, 1187 piles at Berth 1 -4 and 498 piles at Berth 5-6) had to be driven through the calcareous silty sand In this study, the design procedures for offshore steel pipe piles, evaluation for the compression and tension capacities by static and dynamic load test and effective driving criteria by the final set values are discussed

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 말뚝의 항타시공성 및 동적해석
• /
• pp.71-90
• /
• 1994

• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.397-409
• /
• 2023

This study examines two traditional approaches (non-linear elastic and elasto-plastic) in association with 2D and 3D FEM analyses of a box-section pile embedded in sand. A particular emphasis is placed on stress singularities concerning both reentrant corners of the pile section and the resulting tension zones. From the experience gained in this study, non-linear elastic soil models are less restrictive when one considers stress singularities and their possible effects on convergence of the solution. At least for monotonic loading, when compared with field tests, non-linear elastic models yield better results than the plasticity ones. On the other hand, although elasto-plastic models are not limited to monotonic loading, they are much more sensitive to stress singularities. For this reason, a spherical elastic region is necessary at the pile tip to ensure convergence. Without this region, one must artificially impose an apparent cohesion to limit the tension stresses within a sand medium.

• 한국전산구조공학회논문집
• /
• 제13권3호
• /
• pp.285-294
• /
• 2000

계류돌핀의 강관말뚝식 하부구조에 대한 실용적 설계최적화 과정을 제시하고, 수치 예를 통하여 유용성을 평가하였다. 유한차원 최적설계 문제의 정식화에서, 말뚝들을 몇 개의 그룹으로 구분하여 이들의 기하학적 위상과 단면의 치수를 설계변수로 활용하였다. 설계목적함수는 말뚝의 총 중량이며, 설계제약조건은 응력과 근입 깊이, 설계변수의 상한과 하한 등이다. 설계변수의 연계와 고정을 통해 몇 가지의 실용적 설계 대안을 검토하였다. 최적화 프로그램으로는, 순차2차계획법(SQP)을 사용하고 또 쉽게 얻을 수 있는 PLBA 및 IMSL 라이브러리의 DNCONF서브루틴을 이용하였다. 수치예제의 돌핀은 20개의 강관말뚝으로 하부구조를 형성하며, 이중 4개는 연직말뚝이고 16개는 경사말뚝이다. 다양한 대안 설계에서 성공적으로 최적해를 얻었으며, 실용적인 최적 설계과정 임을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.44-57
• /
• 2010

The purpose of this paper is to introduce case studies on 2 projects for the construction of port facilities in Colombo, Sri lanka. In Queen Elizabeth quay development project in 2000, the damage at the bottom of steel tubular piles were occurred when piles were driven into subsoil for piled wharf structure in Stage 1. In order to prevent same incident in Stage 2 & 3, the pile driveability analysis were executed by dynamic formulas, analysis program, test driving and pile load tests. Through pile driveability analysis, prevention plans were proposed. In Colombo port expansion project in 2008, the mv method was applied to predict a primary consolidation settlement of a subsoil under a breakwater in the calculation stage. The $m_v$ was estimated from results of cone penetration tests and the final settlement by consolidation was calculated with it.