• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.301-308
• /
• 2005

This study was carried out to investigate the effect of stem-cutting (SC) length and portion on the major agronomic characters related with dry matter production and accumulation, and to examine their relation­ships in cassava. When cassava was planted with longer SCs or with older portion SCs, major canopy or source characters like leaf number and leaf area index developed excessively, while tuber yields could be reduced due to the decrease of root/shoot ratio, relative growth rate, root dry weight, and harvest index, particularly in the bitter varieties (high cyanide-level varieties). It was considered that the sweet varieties (low cyanide-level varieties) be early­bulked with higher tuber yield when they are planted with the 25-30 cm long SCs or with the SCs from young type to semi-mature portions of mother stems, while the bitter varieties with the 15-20 cm long SCs or with the SCs from semi-mature to hardwood portions of mother stems, respectively. However, a significant interaction between length and portion of SC was not observed in all agronomic characters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.94-98
• /
• 2011

Proximate chemical components (protein, oil, carbohydrate, ash, fiber, and starch) were determined from tubers grown in upland and wetland conditions. The contents of crude protein, oil, carbohydrate, and starch were higher in upland condition than in wetland condition. Eight gibberellins were commonly identified and quantified in leaves and tuber of chufa grown in wetland and upland field during growing season. Gibberellin content was always higher specifically in the leaves and tubers grown in wetland condition than in those grown in upland condition. The current knowledge of gibberellin biosynthesis suggests that the two endogenous bio-active gibberellins both $GA_1$ and $GA_4$ are differently metabolized according to cultural conditions. Major gibberellin biosynthesis route is ascertained dominantly the non C-13 hydroxylation pathway leading $GA_4$ in chufa plants.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.181-181
• /
• 2017

Global warming and climate change have been one of the most important problems last 2 decades. Global warming is known to cause abnormal climate and influence ecology, food production and human health. According to climate change model global warming is causing expansion of drought and increase of evaporation. Therefore, securing water in agriculture has been an important issue for crop cultivation. As potato is susceptible to drought, water shortage generally results in decrease of yield and decrease of biomass. In this research, we investigated characteristics of inorganic nutrient absorption and growth of plants grown under drought condition. Plants were sampled in sites of Cheong-ju and Gangneung, where the severity of drought stress were different. During the growth period in Gangneung, total rainfall in 2016 decreased by 50% compared with those in last 5 years average. Especially, there was almost no rain in tuber enlargement period (from mid-May to mid-June). On the other hand, the total rainfall in of Cheong-ju was is similar to those in last 5 years average. Inorganic components including K, Ca and Mg and plant growth factors such as plant length, stem length, leaf area index and plant biomass were investigated. Tuber yields in both areas were investigated at harvest. Growth period of plants was is longer in Cheong-ju than that in Gangneung. Contents of all inorganic components were higher in plants grown in Cheong-ju than in Gangneung. The results were attributed to higher production of plant biomass in Cheong-ju. Considering the results, severe drought stress conditions in Gangneung accelerated plant aging and resulted in low plant growth. Although total yield was greatly reduced under drought stress the rate of commercial yield was is not significantly different with non-drought conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.135-139
• /
• 2002

The standard of quality was required to promote the consumption of potato and produce the high quality processing products. It will contribute the stability for processing products and the marketability of potato. The quality was determined based on size of tuber and content of dry matter. Even though the criteria of potato quality was involved many characters of tubers, the most important things were grading and packing of potato to create the consumption. For processing of raw materials, the standard of tubers had create between producer and processor according to size of tuber and content of dry matter. The evaluation of quality was performed over the standard to enhance the control of quality. In addition, the seed potato should be taken the evaluation to disease in the field during the period of cultivation and managed under the strict regulation in storage before release to farmer. Then, the producer of seed potato will make a good relationship to farmer with high quality tubers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.22-27
• /
• 1992

This study was conducted to select an excellent goods and to estabilish the plant density of Amorphohpallus konjac. K about 3 local varieties and 2 introduced varieties through each fertilizer level. 1. Plant height and leaf width were increased according to increasing fertilizer level, and tuber yield was the highest at N-P$_2$ $O_{5}$ -K$_2$ O (14-10-14kg) per 10a as 390kg in Geumsan. 2. The more tuber size was large, the more yields per plant due to increasing the plant height and leaf width at low densities, while yields per 10a was decreased. 3. Among 5 varieties used, Jechon cultivar was good as a propagating variety because of increasing number of tuber and bulblet and Japan cultivar was high tuber yield per 10a.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.12-12
• /
• 2017

Genetic improvement in potato can be carried out through several approaches, as sexual crosses, somatic hybridization, mutation and genetic engineering. Although the approach is different, but the goal is the same, to get a superior cultivar. Mutation and genetic engineering are very interesting methods for genetic improvement of potato plants. Mutation by gamma-ray irradiation have been performed to get some new potato cultivars which are more resistant to disease and have higher productivity. We have carried out a mutation of some potato cultivars and obtained some excellent clones to be potentially released as new superior cultivars. By the mutation method, we have released one potato cultivar for the French fries industry, and we registered one cultivar of potato for chips, and two cultivar for vegetable potatoes. Actually we are doing multi-location trial for three clones to be released as new cultivars. Through genetic engineering, several genes have been introduced into the potato plant, and we obtained several clones of transgenic potato plants. Transgenic potato plants containing FBPase gene encoding for fructose bisphosphatase, have a higher rate of photosynthesis and higher tuber productivity than non-transgenic plants. This result suggests that FBPase plays an important role in increasing the rate of photosynthesis and potato tuber productivity. Some transgenic potatoes containing the Hd3a gene are currently being evaluated for their productivity. Over expression of the Hd3a gene is expected to increase tuber productivity and induce flowering in potatoes. Transgenic potato plants containing MmPMA gene encoding for plasma membrane ATPse are more tolerant to low pH than non-transgenic plants, indicating that plasma membrane ATPase plays an important role in the potato plant tolerance to low pH stress. Transgenic potato plants containing c-lysozyme genes, are highly tolerant of bacterial wilt diseases caused by Ralstonia solanacearum and bacterial soft rot disease caused by Pectobacterium carotovorum. Expression of c-lyzozyme gene plays an important role in increasing the resistance of potato plants to bacterial diseases.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.109-114
• /
• 1993

This study was carried out to determine the optimum planting time for in vitromultiplied tuber of Pinellia ternata(Thunb.) Breit. The tubers were planted on April 20, May 20, June 20, July 20, August 20 and September 20 in 1990. Emergence ratios were 68 to 87% in any planting time except planting on July 20. The number of tubers per $m^2$ at harvest in plantings on May 20 and June 20 were significantly higher with 1,110 and 1,021, respectively, while in plantings after July 20, those were drastically decreased. As compared with fresh yield of planting on April 20(352kg /10a), that of May 20 was 109% and June 20 was 103%, while those of after July 20 were from 41% to 19%. There was a highly positive correlation between dry tuber yield and the number of tubers per $m^2(r=0.991^{**})$. Tuber yields for commercial use(diameter over 7.1mm) were high in planting on May 20(322kg /10a) and on June 20(299kg /10a). It was suggested that optimum field planting time for in vitro multiplied tuber of Pinellia ternata(Thunb.) Breit was from May 20 to June May 20.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.383-391
• /
• 2021

To develop a cultivation method for the mass production of sweetpotato cultivars, 'Juhwangmi' (orange tuber) and 'Sinjami' (puple tuber), the yield of tuber roots and content of various functional substances were analyzed according to planting intervals and growing periods. For 'Juhwangmi, the total yield of tubers was increased by respectively 36% and 54% and the yield of tubers over 300 g was increased by respectively 170% and 221% in the 140-day and 160-day cultivation plots compared with that in the 120-day cultivation plot at the 70×20 cm planting interval. Similarly, the total content of beta-carotene in the tubers increased as the cultivation period was extended. In particular, beta-carotene content at the 70×20 cm planting interval was the highest. For 'Sinjami', at the same planting interval, the total yield of tubers and yield of tubers over 300 g significantly increased as the growing period was extended. Within the same cultivation period, the yield of tubers over 300 g and the total anthocyanin content of 'Sinjami' were higher at the 70×30 and 70×35 cm planting intervals than at the 70×20 and 70×25 cm planting intervals in the 140-day and 160-day cultivation plots. Moreover, the total polyphenol and flavonoid content was significantly higher in 'Sinjami' than in 'Juhwangmi', and the values were the highest in the 160-day cultivation plots. In particular, the content of these two functional substances in tubers over 300 g was the highest at the 70×30 and 70×35 cm planting intervals.

• Korean Journal of Plant Resources
• /
• v.8 no.2
• /
• pp.201-207
• /
• 1995

Chinese yam (Dioscorea Opposita Thanb) has been cultivated as medicinal crop and food. The experiment was carried out to determine the effect of tuber head origin and fertilizer application method on its agronomic characters of shoot and root tuber to get some imformation on its cultivation. The tuber head cultivated were cut from normal or branched root tuber. 37-28-32-2000 : N-P-K-Humus(Kg/10a) by dispersal but 30% N reduction of Con(RN) or strip application on the two-side of hill(SRN), were applied but N and K were given by the above method with the rate of 40% in March, 30% in June and 30% in July. Agronomic characteristics related to shoot and root tuber were measured and their relationship was analyzed. Tuber head origin had no effect on emergence rate, vine length, branch and node of vine, while emergence date of the tuber head from the normal root which showed the greatest emergence rate, vine length and node in Con treatment was earlier than the others. The tuber head from the normal root, furthermore, had greater length and diameter of root tuber harvested from the field and fresh weight per plant of per 10a compared to the tuber head from the branched root, whereas in both the normal and the branched tuber head RN had the worst result in the characters related to tuber yield except tuber diameter. The tuber head from the normal root produced heavier root tuber than that from the branched tuber and SRN had the best economic yield among the application methods, which resulted from production of less branched root tubers and their rate. In both the normal and the branched tuber head, moreover, yield per plant and economic yield were positively correlated to tuber length but negatively done to number. of branch of vine.