• Journal of Oriental Neuropsychiatry
• /
• v.7 no.1
• /
• pp.65-75
• /
• 1996

This paper is for studying stress condition of apprentice doctors who were in Oriental Medical Hospital. This study was done on 35 apprentice doctors who were in Kyungsang University Oriental Medical Hospital and Bulgy Oriental Medical Hospital. The Seven-Minute Stress Test of Thomas E. Sttats and 10 questions which were made by the present writer shows the following results.1. The Body stress scale was the highest point. In order of high percent, this shows Whole scale, Mind scale, Situation scale. 2. In comparison of the stress scale of men and women doctors, all the stress scale of women doctors were higher than men doctors. 3. In comparison of the stress scale of Interne and Resident doctors, Whole and Situation stress scale of Resident doctors were higher than Interne doctors, Body and Mind stress scale of Interne doctors were higher than Resident doctors. 4. The personal relation with other people was harmonious, the worst relation of the other colleague was the administrative staff, the next were nurses, senior apprentice doctors orderly. 5. In order of high percent of stressors, this shows personal relation, many works and troubles of care, the lack of private life, unsatisfactory administration system and equipment, the class system and overbearing atmospheres, education and continuous stress, bad conditions and fatigue, economic problems. 6. In order of high percent of systemic stress diseases, this shows musculo- skeletal disease, nervous disease, digestive disease, neurosis, urinary and genital disorder, opthalomo-otolaryngo disease, immunity disorder and vascular disease. In order of high percent of stress symptom, this show headache, fatigue, shoulder pain, back and leg pain, pantalgia and abdominal pain, diarrhea and dismenorrhea, stiffness of neck dizziness indigestion languor after a meal insomnia, neurasthenia lacking interest constipation menorrhalgia bloodshot eyes otitis media allergy thirst flushing edema. 7. In order of the seven mode of emotions in relation to stress, this shows anger, anxiety, isolation, melancholy, fright, sorrow, terror, overjoy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.95-103
• /
• 2004

Recently, many troubles about the right of light have been arising ceaselessly as taller and more dense the buildings have been in the urban. The present time, the right of light is not stipulated legally. For solving above problems, there spend so too much lawsuit expenses and time on the damages about construction stopped and delayed, according to subjective decisions instead of scientific and rational solutions. The past studies of the right of light weren't based on the analytic data and depend on the simple view of point. So, those of studies gave trust to people hardly, only were treated as the ways on the decision about construction among non-engineers. Therefore, this paper studies the efficient solution of problems about the right of light through analysis about mass of sunlight according to season and the hour using a simulation technique on the civil construction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3702-3711
• /
• 1975

This study was originated to investigate the imparired parts of the mist and dust blowers and intended to analyze the causes of their failures by the use of the Weibull probability paper. By the use of the paper, the parts which were needed to change the design, the force of the urgency, the mean time between failures of the parts and the basic causes of the troubles could be predicted. The survey showed that the following parts got out of order: (A) flexible rubber hose, (B) blowing fan, (C) lead valve, (D) piston ring. (E) crank main bearing, (F) coil in magneto and (G) needle valve in carburettor. The analysis of the survey indicated that the parts G, C, E and D were belonged to "wear-out failure", and that the mean time between failures became shorter in order as indicated above. To insure longer lives of those parts, it would be necessary to change the design and the material and to upgrade operators mechanical technique of the mist and dust blower. The failure of the parts A, B and F was classified as "randomfailure", and they did not seem to be the "wear-out" at that time. The parts B and F was evaluated as "initial failure". Quality controls and operating tests by the producer. and the operational training for users should be strengthened so as to eliminate these failures. Were the failures only in the parts A, C, D, E, F and G, it could be said that the "reliability" of the mist and dust blower would fall to 10 percent in the second year, and 50 percent of the mist and dust blowers would fail in all parts A, C, D, E, F and G before the blower would have control insect and disease in 58.2 hectares. The use of the Weibull probability paper for analyzing failures of the mist and dust blowers was effective in that it analyzed failure in the relationship between strength of the parts and users actual circumstanoes.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.263-277
• /
• 1998

Recently, it is frequently reported that fatigue damages of deck slabs and floor systems of highway bridges occur under the conditions of increasing weight and traffic of heavy vehicles. These troubles are affected by dynamic wheel load of heavy vehicles running on roadway surface roughness with bump at expansion joint. It is required that this kind of traffic-induced vibration of highway bridges must be analyzed by using three-dimensional models of bridge and vehicle. In this study, the three-dimensional dynamic analysis is carried out, and dynamic responses of deck slab and wheel loads of moving vehicle are estimated according to different vehicle speeds and bump heights. Analytical responses of bridge deck slab are compared with experimental ones which were measured at Umeda entrance bridge of Hanshin Expressway in Osaka.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.281-292
• /
• 2014

Objectives: The aim of this case study is to verify the chemical exposure reductions for various chemicals by substituting the ingredients of raw materials in a polyurethane(PU) foaming industry. The PU foaming process was making various passenger car seats from chemicals such as toluene diisocinate(TDI), methylene bisphenyl isocyanate(MDI) and polyols. Methods: Basic process data and workers' health effects could be gathered by interviewing managers and reviewing previous exposure monitoring data. Amine, aldehyde and isocyanate chemicals were analyzed following the NIOSH-NMAM. Area sampling methods rather than personal sampling were introduced for this field investigation. Results: Two amines, triethylene diamine(TEDA) and N,N,N',N'-Tetramethyl-1,6- hexanediamine(TMHDA) were identified in raw polyol, cured PU foam and air. The average concentrations of TEDA and TMHDA showd less than 1 ppm by area sampling; however, that caused halovision among workers in PU-PAD process. Aldehydes and isocyanates were detected in the air while the concentrations were relatively low compare to occupational exposure limits. Successful raw material substitution from nonreactive amine to reactive amine could reduces air-borne amine and aldehyde levels by about 70%. Halovision had been disappeared successfully in the process. Conclusions: Several amines caused halovision among workers in PU-PAD process, especially during summer season in spite of relatively low levels. Combination of reactive amines into urethane foam could reduced vapor generation into air, which resulted in the elimination of eye troubles in the process.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.202-209
• /
• 2018

Health care has two different facets. One is commodity and another is a right of human being. Health care as a commodity is utilized by demand approach in market. Demand is determined by economic factors such as price and income. From the last third of the 19th century until the early 1920s, priority of sickness insurance was replacing the income that workers lost as a result of illness and injury. By the 1920s, the capacity of applied biological and medical science was remarkably developed. Development of medical science stimulated the cost of medical care, and the burden of increased medical care cost required new role of medical care security system. In 1942, Beveridge report was published in United Kingdom, and health care was considered as a right of human being. In 1948, United Nations declared heath care as a right in the Universal Declaration of Human Right. In most countries introduced new medical care security policy based on health care as a right. The viewing health care as a commodity must be shifted toward need based care as a right. Need were understood to rest on demographic, epidemiological, scientific, and medical knowledge factors. Bring needed care to the population could best be achieved institutionally by a hierarchy of provider organizations, guided by planning bodies, which would provide comprehensive benefits. In Korea, health care in social health insurance (SHI) is considered as a commodity not a right. However, health policies under SHI must be need approach based on health care as a right. Mismatch between health policies and ideology of SHI made big troubles. It is important to realize ideology of SHI for good health policies.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1238-1246
• /
• 2005

This thesis is written with web security module for safe data transmission between heterogeneous systems(ex. OS). Web system has allowed users to have great convenience and a lot of information. Though web service business has been progressed much, because of the limitation of it's own system, lots of loss, derived from data spillage which is the weakest point of security, has also followed. Suggested security module is realized by two module. One for server security module for web server, the other is client security module for client. The security structure, suggested on this thesis guarantee safe data transmission by only simple installation of modules in clients and servers. for speed sensitive transmission between web server and browser, Triple-DES, symmetric encryption system suitable for fast encryption communication, is adapted. To solve problems caused from key management, Diffie-Hellman's key exchange algorithm is adapted. By this method, all symmetric encryption troubles from key distribution and management, speed could be work out a solution. And Diffie-Hellman type algorithm secures Authentication for safe data Protection.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.29-37
• /
• 2011

The modal characteristics of a compressor wheel of an automotive turbocharger have been investigated using an experimental method based on an acoustic frequency response function, p/f(${\omega}$), where p is sound pressure radiated from a structure, and f is impact force. First, a well-defined annular disc with narrow radial slots was examined to check whether the vibro-acoustic test could precisely determine natural quencies and vibration modes of structures showing that the vibro-acoustic test proposed in this paper was comparable to the conventional modal test with an accelerometer and the numerical analysis. The conventional method has been found to be inappropriate for compressor wheel because of additional mass due to the accelerometer and additional damping from the accelerometer cable alter the dynamic responses of the wheel blades. odal characteristics of the wheel have been defined using vibro-acoustic test and verified with the results from another conventional method using a laser vibrometer. Natural quencies and mode shapes of a turbocharger wheel, which can't be precisely obtained with onventional method, could be defined accurately without the additional effects from sensor and cable. Proposed method can be applied to small structures where conventional sensors and cables could generate troubles.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.216-218
• /
• 2001

The transformer role is very important in power system operation and control; also its price is very expensive. Therefore many kinds of the efforts for transformer protection have been executed. So for as, current differential relay(87) has been mainly used for transformer protection. But current differential relaying method has several troubles as followings. Differential current can be occurred by transformers inrush current between winding1 and winding2 of transformer when transformer is initially energized. Also harmonic restrained element used in current differential relaying method is one of the causes of relays mal-operation because recently harmonics in power system gradually increase by power switching devices(SVC, FACTS, DSC, etc). Therefore many kinds of effort have been executed to solve the trouble of current differential relay and one of them is method using ratio of increment of flux linkages(RIFL) of the primary and secondary windings. This paper introduces a novel protective relay for power transformers using RIFL of the primary and secondary windings. Novel protective relay successfully discriminates between transformer internal faults and normal operation conditions including inrush and this paper includes real time test results using RTDS(Real Time Digital Simulator) for novel protective relay. A novel protective relay was designed using the TMS320C32 digital signal processor and consisted of DSP module. A/D converter module, DI/DO module, MMI interface module and LCD display module and developed by Xelpower co., Ltd.