• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.63-74
• /
• 2004

Temporal locality of Web server references is one of the important characteristics to be considered in the design of a Web caching strategy, and it is important to measure the temporal locality exactly. Various methods to estimate the temporal locality have been proposed, however, Web server designers have still troubles in its measurement by using the tools that don't reflect the interarrival time of document requests. In this paper, we propose a measurement tool for short-term temporal locality based on request interarrival time, and discuss the simulation results based on the flares from NLANR and NASA Web sites. The results show that the proposed tool estimates the short-term temporal locality more exactly than that based on a stack.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.262-269
• /
• 2009

The public and private sectors have quite different views on the operation of community welfare alliance. Their understanding of the issues has a vast difference, which may lead to twisted operation of the community welfare alliance. In fact, there are many areas that have troubles in the operation of the alliance. This study systematically analyzes limitations that the alliance has and it goals to draw out improvement policies to overcome them. As a study method, a survey is conducted on the leaders of community welfare alliance to suggest an AHP analysis model on the issue awareness and improvement policy. Concentrated on the analyzed results and implications entailed through the analysis, this study suggests improvement policies to overcome such limitations that the community welfare alliance has.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.583-586
• /
• 1997

In this study, we proposed an application of wavelet transform or analysis of ultrasound echo signals to improve troubles of convenianced methods such as SDM, SSM. We examined method using wavelet transform to prove again our proposal which we have proposed prior time. At first, we made phantoms by adding 0.01, 0.015, 0.02, 0.025, 0.03, 0.035, 0.04, 0.045, 0.05($g/cm^3$) on constant quantity of distilled water and agar, and collected echo signals. We used SDM(spectral difference method) and WTM(wavelet transform method) as signal processing method. To compare with WTM, SDM was used. In WTM, we selected detail signals of level 3 of Daubechies 16, and got derivative, calculated area of it. Next, we calculated slopes. In SDM, it was 0.0308 and in WTM, it was 0.5248. As a result, we knew that we could know that the values using WTM showed more detailed than those using SDM. So we could concluded wavelet transform is very useful and powerful in ultrasound tissue characterization.

• Journal of Oriental Neuropsychiatry
• /
• v.19 no.2
• /
• pp.279-288
• /
• 2008

In this case, a 33 year-old female patient had a chronic headache with Panic disorder, and accompanied gastroenteric troubles(vomiting, nausea, dyspepsia and abdominal discomfort), for fifteen years. It may be the symptoms of Phlegm-syncope headache, and we treated this disease with oriental medical treatment, including the Banhabaekchulcheonma-tang, Breathing retraining and Cognitive retructuring. The effects of treatment were measured by were using BPI(Brief Pain Inventory), VAS(Visual analog scale). In Conclusion, Chronic headache with panic disorder was improved by our treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.108-117
• /
• 2008

A transmission designed with P.T.O(Power Take-Off) axle for agricultural work vehicles including multi-purpose vehicles has been developed. It is focused on the 4-wheel drive transmission of synchronous contact type for practical use in fruit tree households which is required for a large-sized agricultural vehicle. Concerning to the specification performed, the load capacity is from 500kg to 1,000kg and the safety should be secured for passengers. In addition, the driving condition should also be secured under bad situations of the topographic slope, swampy land and the rest. In order to carry out above tests, a prototype vehicle through strength analysis of transmission design has been manufactured. Consequently, optimal design conditions on the power transmission with multi-purpose vehicle for various jobs are proposed such as an indication of optimal RPM and torque at a certain work situation. The performance test through the prototype of multi-purpose work vehicle is performed and the related data base is achieved. Finally, it is improved on troubles by the analysis of the results of R&D and provided the solutions on problems occurring to mass production in the future.

• Natural Product Sciences
• /
• v.10 no.4
• /
• pp.168-172
• /
• 2004

In India, Gymnema sylvestre due to the unique property of the plant to antagonize the sweet taste is known as 'Gur-mar'. It has several ethnomedicinal values as various tribals/traditional communities and rural peoples of India find diverse medicinal uses viz. antidiabetic, stomachic, diuretic, and is useful in cough and throat troubles. Besides, it has strong effect on reducing blood sugar. The present communication deals with the detailed pharmacognostical evaluation of the aerial parts of G. sylvestre collected from three places of the country-Varanasi (U.P), Panchmarhi (M.P), Salem (Tami Nadu) and commercial sample procured from local market. The botanical and physico-chemical parameters of all the samples were quite similar though little variations were observed in foaming index, alcohol and water soluble extractives of local sample. The microscopic characteristics of the drug are horse shoe shaped petiole with 3 amphicribal vascular bundles, sieve tubes well developed; anomocytic stomata only on the abaxial surface of the leaf, the fan shaped amphicribal vascular bundle, presence of intraxylary phloem. The TLC fingerprint profile of all the samples was more or less similar only the quantity of some of the compounds varied.

• Asia pacific journal of information systems
• /
• v.13 no.1
• /
• pp.73-101
• /
• 2003

Firms can create additional customer values by changing the visibility characteristic of business transactions. Both visible and invisible transactions can provide distinctive values to the customers. Visible transactions are those that are open to the customer: the customer can see the detailed logic of the transaction and may manipulate specific variables to control the transaction process. Invisible transactions mean that customers have little ability to control the transaction flow and may even be insulated from seeing the transaction. These invisible transactions will be taken care of only by suppliers, and be regarded as a process performed by suppliers. This paper pursues finding out the contingencies of successful transaction visibility change by answering to the following question; "when does increasing(or decreasing) transaction visibility make sense to customers?" This archival case study finds out that transaction visibility change should fit to the need and capabilities of customers. Increasing transaction visibility makes sense when customers need a certain supplier's performance and have a confidence in the capabilities of executing the performance. By the same token, decreasing transaction visibility makes sense when customers have substantial troubles in conducting their current transaction actions or when customers don't feel it necessary to conduct them separately because they can be derived from other action.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.957-965
• /
• 2006

A high-performance hot chuck is designed as a heating device for an ultra-precision flip-chip bonder with infrared alignment system. Analysis of design requirements for thermal performance leads to a radiative heating mechanism employing two halogen lamps as heating source. The heating tool is made of silicon carbide characterized by high thermal diffusivity and small thermal expansion coefficient. Experimental tests are performed to assess heat-up performance and temperature uniformity of the heating tool. It is revealed that the initial design of hot chuck results in a good heat-up speed but there exist a couple of troubles associated with control and integrity of the device. As a means to resolve the raised issues, a revised version of heating tool is proposed, which consists of a working plate made of silicon carbide and a supporting structure made of stainless steel. The advantages of this two-body heating tool are discussed and the improved features are verified experimentally.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.199-205
• /
• 2001

Burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, burr types are classified and data bases are developed to predict burr formation result. From the CAD file for work geometry and the NC data for tool path, the exit angles are calculated at every edges. This program predicts the burr geometry at exit edges using the prediction algorithm and data bases which are developed experimentally. Simulation results on deformation strain and temperature are also available in specific 2-dimensional cutting conditions. Also algorithm which can determine the exit angle is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.304-307
• /
• 2002

High speed machining was accomplished. through the technological advances which covers the whole field of mechanical industry. But tapping have many troubles because of its complicate cutting mechanism, for example. tool damage, chip elimination and synchronization between spindle rotation and feed motion. But High speed tapping is so important that it marches in step with the flow of the times and make improvement in the productivity. In this paper we analyze mechanism of high speed synchronized tapping with the signal of tapping torque and spindle speed obtained through the newly developed high speed tapping machine(NTT-30B). We made an experiment with this machine on condition of various speed from 1000rpm to 10000rpm. As one complete thread is performed through the whole chamfer cutting, cutting torque increases highly in chamfer cutting, but smoothly in full thread cutting functioning of the threads guide. And the size of cutting torque according to spindle speed(rpm) was not enough of a difference to be conspicuous.