• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.88-91
• /
• 2002

The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Science of Emotion and Sensibility
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2016

Consumers tend to perceive the shoes as just their footwear to protect and comfort foot and fashion products to decorate and express their self-images. Even though online market research analysis indicated shoes consumption is important in daily life of consumers, there is limited research that was conducted specifically on shoes e-market. The research investigates the process of shoes' e-impulse buying focusing on the effects of shopping orientation, marketing stimulus and consumers' perceived risk in shoes market at Internet. A total of 408 self-administered questionnaires were obtained from universities students, who had experienced the e-impulse buying of shoes at least once for the last six months. Results confirmed that consumers who had higher hedonic shopping orientation or brand shopping orientation were more likely to consider the marketing stimuli (e.g., promotion stimuli and product stimuli), whereas consumers who had higher economic shopping orientation were consider the lower marketing stimuli and the more perceived functional risk in the e-shopping context of shoes. For shoes, marketing stimulus had directly positive effects on e-impulse buying, while consumers' perceived risk had no significant effects on e-impulse buying. The findings suggest that the market stimulus, which is affected by consumers' shopping orientation, is an important factor in triggering e-impulse buying of shoes.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.54-54
• /
• 2003

Prostate gland contains neuroendocrine cells (PNECs) are playing important roles in physiological and pathophysiological processes of the prostate gland. Here, we investigated the role of purinoceptors in PNECs freshly isolated from rat ventral prostate (RPNECs) that show immunoreactivity to chromogranin A. Fura-2 ratiometry revealed that ATP evokes both fast Ca$\^$2+/ influx and store Ca$\^$2+/ release in RPNECs. A whole-cell patch clamp study demonstrated fast inactivating cationic current activated by ATP or by ${\alpha}$,${\beta}$-MeATP, which was blocked by ATP-TNP. The activation of P2X inward current was tightly associated with a sharp increase in [Ca$\^$2+/]$\sub$c/. The presence of P2X1/3 subtypes were proved by RT-PCR analysis. For the stored Ca$\^$2+/ release, ATP and UTP showed similar effects, suggesting the dominant role or P2Y2 subtypes, also confirmed by RT-PCR. Both P2X (${\alpha}$,${\beta}$-MeATP) and P2Y (UTP) stimulation induced changes in the cell morphology (initial shrinkage and blob formation on the surface) reversibly. Exocytotic membrane trafficking events were monitored with the membrane-bound fluorescent dye, FM1-43 using confocal microscopy. In spite of the similar Ca$\^$2+/ responses, UTP was far less effective in triggering exocytosis than ${\alpha}$,${\beta}$ -MeATP. Since serotonin is reportedly stored in the secretory granule of PNECs, we directly examined whether the aforementioned agonists elicit release of serotonin using carbon fiber electrode-amperometry. In accordance with the results of FM1 -43 experiments, ${\alpha}$,${\beta}$-MeATP efficiently evoke serotonin secretion while not with UTP. In summary, the P2X-mediated Ca$\^$2+/ influx plays crucial roles in the exocytosis of RPNECs. Although a global increase in [Ca$\^$2+]$\sub$c/ might be related with the morphological changes, a sharp rise of [Ca$\^$2+/]$\sub$c/ in the putative sub-plasmalemmal ‘microdomains’ might be a decisive factor for the exocytosis.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.79-87
• /
• 2017

In this paper, for 43 sites neighboring to western area of Gangwondo where disaster of debris flow occurred from 2006 to 2013, magnitude of debris flow was estimated from results of site investigation and correlation analysis between influencing factors to its magnitude was performed. Magnitude of channelized debris flow was found greater by 6.5 times of that of hill slope debris flow and approximately 5% of total volume was occurred at initiation part of channelized debris flow. As results of analyzing yield rate of debris flow, for channelized debris flow, yield rate values of $19m^3/m$ and $8m^3/m$ were obtained for total volume being over $10,000m^3/m$ as the large scale of debris flow and less than $10,000m^3/m$ respectively, and value of $5m^3/m$ was estimated for hill slope debris flow. As results of correlation analysis of influencing factors to magnitude of debris flow, runoff distance and erosion width were very highly correlated to its magnitude whereas average slope of basin and erosion depth showed relatively low correlation. In particular, value of erosion depth was in the range of 0.5-2.6 m, being similar range to the value proposed by Ikeya (1981). Triggering rainfall to debris flow such as continuous rainfall and maximum intensity of hour rainfall were analyzed to have low correlation with magnitude of debris flow.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.571-580
• /
• 2010

We sought to define the main motivational factors promoting consumption of Prunus mume products. We surveyed both specialized high-volume consumers and public consumers, and focused on consumption of and preferences for Prunus mume and Prunus mume products. We investigated how products were preferentially consumed, purchase experience, purchase location, purchase price, consumption experience, factors important in a purchase decision, preference factors, dissatisfaction factors, consumption outlook, comments on new processed foods, and activation of consumption. A total of 534 responses were received and data were analyzed using the SAS program (Version 9.1) of the Frequency test; Chi-square test was used to detect significant factors. A greater percentage of high-volume(compared with low-volume) consumers processed personal products at home. The public consumer tended to buy commercial products. However, public consumers who were older, who had higher incomes, and who were heads of households, tended to both buy commercial products and to prepare foods at home. The common purchase methods used by high-volume consumers were internet and direct marketing, but the public consumer frequented department stores and hypermarkets. High-volume consumers observed that commercial products were expensive, and such consumers seemed to be particularly cost-sensitive. The decisive factor triggering purchase decisions in high-volume consumers was the geographical origin of the fruit, whereas the public consumer was more concerned with taste. In public, positive factors were that the product was good for health and had a pleasant taste. Some of those surveyed complained of a lack of variety in Prunus mume products and that the amount of Prunus mume in certain products was low. To promote and increase consumption, convenient-to-eat products with healthy images are needed.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.419-430
• /
• 2021

This study investigated spatiotemporal trends of sediment-related disasters in North Korea from 1960 to 2019 and post-disaster recovery cases based on a literature review and satellite images. Results showed that occurrence status of sediment-related disasters was initially externally reported in 1995 (during the Kim Jongil era); their main triggering factor was heavy summer rainfall. Furthermore, forest degradation rate was positively correlated with population density (R² = 0.4347, p = 0.02) and occurrence number of sediment-related disasters was relatively high on the west coast region, where both variables showed high values. This indicates that human activity was a major cause of forest degradation and thus, significantly affected sediment-related disasters in mountain regions. Finally, sediment- related disasters due to shallow landslides, debris flow, and slow-moving landslides were observed in undisturbed forest regions and human-impacted forest regions, including terraced fields, opencast mines, forest roads, and post-wildfire areas, via satellite image analysis. These disaster-hit areas remained mostly abandoned without any recovery works, whereas hillside erosion control work (e.g., treeplanting with terracing) or torrent erosion control work (e.g., check dam, debris flow guide bank) were implemented in certain areas. These findings can provide reference information to expand inter-Korean exchange and cooperation in forest rehabilitation and erosion control works of North Korea.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.53-64
• /
• 2009

Many slope failures are induced by rainfall infiltration. A lot of recent researches are therefore focused on rainfall-induced slope instability and the rainfall infiltration is recognized as the important triggering factor. The rainfall infiltrates into the soil slope and makes the matric suction lost in the slope and even the positive pore water pressure develops near the surface of the slope. They decrease the resisting shear strength. In Korea, a few public institutions suggested conservative slope design guidelines that assume a fully saturated soil condition. However, this assumption is irrelevant and sometimes soil properties are misused in the slope design method to fulfill the requirement. In this study, a more relevant slope stability evaluation method is suggested to take into account the real rainfall infiltration phenomenon. Unsaturated soil properties such as shear strength, soil-water characteristic curve and permeability for Korean weathered soils were obtained by laboratory tests and also estimated by artificial neural network models. For real-time assessment of slope instability, failure warning criteria of slope based on deterministic and probabilistic analyses were introduced to complement uncertainties of field measurement data. The slope stability evaluation technique can be combined with field measurement data of important factors, such as matric suction and water content, to develop an early warning system for probably unstable slopes due to the rainfall.

• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.181-190
• /
• 2003

An investigation was conducted on the aquatic environment of the Okchon Stream watershed six times from May to September 2002. The results of investigation revealed that variation of environmental factors were quite significant for each stream and reach, showing a significant difference between running water and stagnant water. Aquatic nutrients were relatively low in the upstream, gradually increasing as the influx of treated wastewater into the stream increased. This suggests that the point source definitely affected the nutrient content of the stream. In particular, the variations of SRP and $NH_4$ were very distinct in the watershed compared to other nutrients. Thus, it can be considered as a major factor in evaluating the effect of treated wastewater. Immediately after the influx of treated waste-water, the average content of SRP rose to 919.3 ${\mu}g$ P/l. This was a very effective level in the watershed, suggesting that the percentage of the nutrients in the water was controlled by the content of P. The constant supply of treated wastewater was found to be a critical factor in triggering the increase in chl-a in the embayment of the stream. With the proliferation of the blue-green algae, the content of chl- a ranged 234.5${\sim}$1,692.2 ${\mu}g/l$. The maximum standing crops exceeded $1.0{\times}10^6$ cells/ml in August, which was more than 200 times the level for red tide in the freshwater. This result was well reflected in other environmental factors, with 100% of AFDM/TSS reflecting the severity of water pollution by algae. Therefore, the reduction of P and N con-tents in the treated wastewater is critical in improving the aquatic environment of the stream as well as water quality management for the reservoir.

• Journal of Korean Philosophical Society
• /
• v.145
• /
• pp.167-194
• /
• 2018

According to the result of 2017 youth statistics, the first rank of the death cause of Korean youth is suicide for nine years. The recent study on factors affecting juvenile suicide presents: family factors; character and psychological factors; mental disease factors; suicide-triggering factors; school factors; and protection factors; and so on. What is required to the youth who are vulnerable to the confusion of identity and the adjustment of emotion or impulse is not only drug treatment or mental therapy but also the support of family or society where adolescents are encouraged to be introspective and form their identity in a healthy approach in the diverse humanistic philosophical dimension. This study is going to pay attention to the aesthetic existence of Kierkegaard who provided the foundation of human existential identity centered on three stages of existence. For this purpose, we attempt to search for the philosophical basis for the understanding of juvenile identity centered on the analysis of Kierkegaard's Either / Or Volume I (Entweder - Oder Teil I). Especially, we are going to attempt the understanding of aesthetics of youth through the analysis of three stages of desire (Begierde) suggested in Chapter 2 of this book. Herewith he suggests aesthetic existence through 'desire', and aesthetic existence as the desire again through three stages of 'dreaming ($tr{\ddot{a}}umend$)' desire, 'searching (suchend)' desire, and 'desiring (begehrend)' desire. Based on this analysis of three stages, we plan to graft the roots of sociological factors presented as the cause of youth's suicide onto the analysis of existential philosophy. Through this, we attempt to grope for the diagnostic and healing discourse which Kierkegaard's existential analysis can present in the formation and recognition of youth identity and disclose a factor of the emotion or the disorder of impulse adjustment as well as depression suggested as the main contributing factor of youth's suicide and search for philosophical discourse for the prevention of juvenile suicide.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.