• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.49-68
• /
• 2023

The three-dimensional failure criterion is essential for maintaining wellbore stability and sand production problem. The convenient factor for a stable wellbore is mud weight and borehole orientation, i.e., mud window design and selection of borehole trajectory. This study proposes a new three-dimensional failure criterion with linear relation of three in-situ principal stresses. The number of failure criteria executed to understand the phenomenon of rock failure under in-situ stresses is the Mohr-Coulomb criterion, Hoek-Brown criterion, Mogi-Coulomb criterion, and many more. A new failure criterion is the extended Mohr-Coulomb failure criterion with the influence of intermediate principal stress (σ₂). The influence of intermediate principal stress is considered as a weighting of (σ₂) on the mean effective stress. The triaxial compression test data for eleven rock types are taken from the literature for calibration of material constant and validation of failure prediction. The predictions on rock samples using new criteria are the best fit with the triaxial compression test data points. Here, Drucker-Prager and the Mogi-Coulomb criterion are also implemented to predict the failure for eleven different rock types. It has been observed that the Drucker-Prager criterion gave over prediction of rock failure. On the contrary, the Mogi-Coulomb criterion gave an equally good prediction of rock failure as our proposed new 3D failure criterion. Based on the yield surface of a new 3D linear criterion it gave the safest prediction for the failure of the rock. A new linear failure criterion is recommended for the unique solution as a linear relation of the principal stresses rather than the dual solution by the Mogi-Coulomb criterion.

• 한국농공학회지
• /
• 제38권6호
• /
• pp.64-73
• /
• 1996

The three-dimensional strength behavior of compacted decomposed granite soil was studied using cubical triaxial tests with independent control of the three principal stresses. All specimens were loaded under conditions of principal stress direction fixed and aligned with the directions of compacted plane. For comparable test conditions, the major principal strain and volume strain to failure were smallest when the major principal stress acted perpendicular to the compacted plane. The opposite extremes were obtained when the major principal stress acted parallel to the compacted plane. In cubical triaxial tests with same b values and with ${\theta}$ values in one of three sectors of the octahedral plane, independent of the range of ${\theta}$, higher friction angles are obtained in tests with b greater than in triaxial compression tests in which b 0.0, Comparison between the results of the drained cubical triaxial tests on lksan compacted decomposed granite soil and the cross section of the Mohr-Coulomb failure surface as well as the cross section of the Mohr-Coulomb failure surface were made. Lade's isotropic failure criterion based on vertical specimens overestimates the strengths for tests performed with values of 0 between 90˚ and 1 50˚ the Mohr-Coulomb criterion generally underestimates the strengths of tests performed with values of ${\theta}$ between $0^{\circ}$ and $180^{\circ}$ except around the $120^{\circ}$.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.5-16
• /
• 1996

실리카질 모래에 대한 많은 시험결과로부터 삼축압축시첩과 평면변형시험간의 강도관계를 밀도와 파괴시 유효평균주응력의 함수로 표현하였다. 또한 파괴시 평균주응력과 축차응력간의 응력비가 내부마찰각의 함수로 잘 규정되었으며 그 비는 내부마찰각의 증가에 따라 감소하였다. 또한 중간주응력을 최대주응력과 최소주응력으로써 표현하였으며 이론적인 파괴면의 각도와 평면변형시험에서 관찰된 파괴면의 각도가 비교적 잘 일치함이 확인되었다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.595-602
• /
• 1998

Specimens of 304 stainless steel were tested to failure at elevated temperatures under multiaxial stress states, uniaxial tension using smooth bar specimens, biaxial shearing using double shear bar specimens, and triaxial tension using notched bar specimens. Rupture times are compared for uniaxial, biaxial, and triaxial stress states with respect to the maximum principal stress, the von Mises effective stress, and the principal facet stress. The results indicate that the principal facet stress gives the best correlation for the material investigated, and this parameter can predict creep life data under multiaxial stress states with rupture data obtained with specimens under uniaxial stresses. The results also suggest that grain boundary cavitation, coupled with localized deformation processes such as grain boudary sliding, controls the lifetimes of the specimens.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1432-1440
• /
• 2005

High-temperature rupture behavior of 5083-Al alloy was tested for failure at 548K under multiaxial stress conditions: uniaxial tension using smooth bar specimens, biaxial shearing using double shear bar specimens, and triaxial tension using notched bar specimens. Rupture times were compared for uniaxial, biaxial, and triaxial stress conditions with respect to the maximum principal stress, the von Mises effective stress, and the principal facet stress. The results indicate that the von Mises effective and principal facet stresses give good correlation for the material investigated, and these parameters can predict creep life data under the multiaxial stress states with the rupture data obtained from specimens under the uniaxial stress. The results suggest that the creep rupture of this alloy under the testing condition is controlled by cavitation coupled with highly localized deformation process, such as grain boundary sliding. It is also conceivable that strain softening controls the highly localized deformation modes which result in cavitation damage in controlling rupture time of this alloy.

• 한국지반공학회지:지반
• /
• 제10권1호
• /
• pp.103-118
• /
• 1994

세주응력을 서로 독립적으로 조절할 수 있는 입방체형삼축시험기를 이용하여 모래시료에 대한 일련의 배수삼축시험이 실시되었다. 그리고 Lade에 의해 제안된 등방단일경화구성모델을 사용하여 입방체형삼축시험시와 동일한 응력경로에 대한 응력-변형률 거동을 해석하였다. 등방단일경화구성모델에 의한 거동 예측치는 초기재하단계(primary loading)시 입방체형삼축시험결과와 좋은 일치를 보이고 있는 것으로 나타났다. 그러나 반복재하단계(unloading과 reloading)의 경우 거동예측치는 시험결과와 많은 차이를 보이고 있다. 이것은 등방단일경화구성모델의 소성일경화계수가 시험결과의 경화부분을 근거로 하여 결정되었기 때문에 연화부분에서 많은 오차가 있는 것으로 판단된다.

• 한국농공학회지
• /
• 제37권2호
• /
• pp.64-72
• /
• 1995

A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.99-107
• /
• 1988

과압밀점토(過壓密粘土)에 대한 일련의 입방형삼축시험(立方型三軸試驗)이 실시되었다. 삼축시험(三軸試驗)은 세 주응력(主應力)을 서로 독립적으로 제어시킬 수 있는 입방체형삼축시험기(立方體型三軸試驗機)를 사용하여 실시되었다. 점토공시체(粘土供試體)로는 현장(現場)에서 직접 채취된 자연시료(自然試料)를 삼축(三軸) chamber 내(內)에서 과압밀비(過壓密比)가 5가 되게 만든 입방체형공시체(立方體型供試體)가 사용되었으며 본연구결과(本硏究結果), 중간주응력(中間主應力)은 과압밀점토(過壓密粘土)의 응력변형률(應力變形率), 비배수강도(非排水强度), 유효강도(有效强度), 유효내부마찰각(有效內部摩擦角) 및 간극압(間隙壓)에 큰 영향을 미치고 있음이 구명(究明)되었다. 중간주응력(中間主應力)이 최소주응력(最小主應力)과 같지 않은 경우의 과압밀점토파괴강도(過壓密粘土破壞强度)는 Mohr-Coulomb 파괴규준(破壞規準)에 의하여 과소평가(過小評價)되나 Lade규준(規準)에 의하여는 대단히 양호하게 산정된다. 또한 과압밀점토(過壓密粘土)의 비배수강도(非排水强度)는 Tresca규준(規準)에 일치하지 않는다.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.639-655
• /
• 2016

The effect of particle breakage and intermediate principal stress ratio on the behaviour of crushable granular assemblies under true triaxial stress conditions is studied using the discrete element method. Numerical results show that the increase of intermediate principal stress ratio $b(b=({\sigma}_2-{\sigma}_3)/({\sigma}_1-{\sigma}_3))$ results in the increase of dilatancy at low confining pressures but the decrease of dilatancy at high confining pressures, which stems from the distinct increasing compaction caused by breakage with b. The influence of b on the evolution of the peak apparent friction angle is also weakened by particle breakage. For low relative breakage, the relationship between the peak apparent friction angle and b is close to the Lade-Duncan failure model, whereas it conforms to the Matsuoka-Nakai failure model for high relative breakage. In addition, the increasing tendency of relative breakage, calculated based on a fractal particle size distribution with the fractal dimension being 2.5, declines with the increasing confining pressure and axial strain, which implies the existence of an ultimate graduation. Finally, the relationship between particle breakage and plastic work is found to conform to a unique hyperbolic correlation regardless of the test conditions.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.153-166
• /
• 1991

모래(표준사(標準砂))의 응력(應力)-변형거동(變形擧動)에 관계되는 중간주응력(中間主應力)의 영향을 조사(調査)하기 위하여 삼주응력제어시험(三主應力制御試驗)을 응력경로(應力經路) 별(別)로 실시(實施)하였다. 시험과정(試驗課程)에 의하면 모래의 전단강도(剪斷強度)는 응력경로(應力經路)의 변화(變化)에 따라 다르게 나타나고 있다. 즉 내부마찰각(內部摩擦角)은 응력경로(應力經路)를 나타내는 Habib의 응력변수(應力變數) b값에 따라, b값이 0에서 0268의 범위(範圍)에서 크게 증가(增加)하고, b=0268~0.682의 범위(範圍)에서 거의 비슷하여, b=0.682~1.0의 범위(範圍)에서 약간 감소(減少)하지만 삼축신장상태(三軸伸張狀態)의 내부마찰각(內部摩擦角)은 삼축압축상태(三軸壓縮狀態)의 것보다 크게 나타난다. 이러한 응력변수(應力變數)의 변화(變化)에 따른 내부마찰각(內部摩擦角)의 변화(變化)는 공시체(供試體)의 밀도(密度)와 구속압(拘束壓)의 변화(變化)에 관계하지 않고 동일(同一)한 경향(傾向)을 나타내었다. 따라서 모래의 전단강도(剪斷強度)는 중간주응력(中間主應力)의 영향을 크게 받고 있음을 알 수 있다. 결과적(結果的)으로 본(本) 연구(硏究)에서 조사(調査)된 모래의 전단강도(剪斷強度)에 미치는 중간주응력(中間主應力)의 영향을 기존(旣存)의 연구(硏究)와 비교하여 보면 Lade Duncan 및 Matsuoda Nakai의 연구결과(硏究結果)와 비슷한 경향(傾向)을 나타내었으며 대략 이들의 파괴규준(破壞規準)사이에 있음을 알 수 있었다.