• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.408-413
• /
• 2004

High speed planning boats also have been required more and more the rational strength analysis and evaluation for the optimal structural design in respect of the structural lightness according to the high speed trend. Even though the suggestion of the simple type equation for the equivalent dynamic pressure is reasonable to design the scantling of ship structure conveniently, many research activities for more reasonable improvement of the simple design pressure, have been continued to suggest the more accurate equivalent static description of tire structural response such as the deflection and stress of hull structure. In this research, we focus on the aluminum bottom stiffened plate structure in which structural scantling is mainly depend on the local loads such as dynamic or impact pressure without other load effects and structural response for the simple dynamic equivalent pressure was investigated through the structural analysis. In order to investigate the structural response of the bottom stiffened plate structure subjected to the dynamic equivalent design pressure, linear and nonlinear structural analysis of the bottom stiffened plate structure of 4.3 ton aluminum planning boat was performed based on the equivalent static applied loads which were derived from the KR regulation and representative one among various dynamic equivalent pressure equations. From above analysis results, we found that the response such as deflection and stress of plate member was similar with the response results of one plate member model with fixed boundary, which was published previous paper and in case of KR design loading, all response of stiffened plate structure were within elastic limit. Through the nonlinear analysis, nearly elastic behavior including the slight geometrical nonlinear response was dominant but plastic local zone was appeared at $85\%$ limit load. Therefore, we can say that through tire linear and nonlinear analysis, this stiffened plate member has no structural strength problem based on the yield criteria in case within $60\%$ limit load except the other strength point of view such as the fatigue and buckling problem.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.102-115
• /
• 2012

The purpose of this paper is to review several different methods calculating gas hydrate saturations. There are three methods using downhole log data, core data (including pressure core), and seismic velocity data. Archie's equation using electrical resistivity of downhole log data is widely used for saturation calculation. In this case, Archie's parameters should be defined accurately. And the occurrence types of gas hydrate significantly affect to saturation calculation. Thus saturation calculation should be carefully conducted. The methods using chlorinity and pressure core data are directly calculated from core sample. So far, the saturation calculated from pressure core gives accurate and quantitative values. But this method is needed much more time and cost. Thus acquisition of the continuous data with sediment depth is realistically hard. The recent several results show that the saturation calculated from resistivity data is the highest values, while the value calculated from pressure core is the lowest. But this trend is not always absolutely. Thus, to estimate accurate gas hydrate saturation, the values calculated from several methods should be compared.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1649-1657
• /
• 2006

In order to find an alternative source of inoculum to caecal content for studying the fermentation activity of rabbit hindgut, caecal content and faeces of 25 hybrid Hyla rabbits were used as inocula for an in vitro gas production trial. About 1 g of three substrates (dehydrated alfalfa meal, dehydrated beet pulp, barley) was weighed, in quadruplicate per inoculum, in 120 ml bottles; 75 ml of anaerobic medium and 4 ml of reducing solution were added and bottles were placed at $39^{\circ}C$. Caecal content and faeces were diluted respectively 1:2 (CI) and 1:8 (FI) with anaerobic medium and were introduced in the respective bottles (10 ml). Gas production was recorded 20 times at 2-24 h intervals throughout fermentation (96 h). The fermentation characteristics (i.e. degraded organic matter, OMd; potential gas production, A; fermentation rate, Rmax; time at which it is reached, Tmax; pH, volatile fatty acid, VFA) were studied by inoculum and feedstuffs. The feedstuffs, according to their chemical composition, showed very different fermentation characteristics. In particular, OMd, A and Rmax allowed feedstuff classification as follows: barley>beet pulp>alfalfa. The inocula differ (p<0.05) in Tmax, were higher for CI (15.53 vs. 11.96 h) and in VFA production. In particular, CI produced higher levels of acetate (38.9 vs. 33.4 mM/g OM incubated, p<0.01) and isobutyrate (0.72 vs. 0.42, p<0.01) but less propionate (7.1 vs. 10.3, p<0.01) and butyrate (11.3 vs. 14.0, p<0.01). However, the trend of gas production, similar for the inocula according to the fermented substrate, and the good regression equation to estimate some caecal fermentation parameters from faeces suggest that, after standardisation, the faeces could be used as an alternative inoculum for gas tests in rabbit.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.139-148
• /
• 2000

In this paper, the interaction of oblique incident waves with a bottom-mounted and fluid-filled flexible membrane structure is investigated in the frame of linear hydro-elastic theory. The static shape of a membrane structure containing the fluid of a specific density is initially unknown and must be calculated before the hydrodynamic analysis. To solve hydrodynamic problem, the fluid domain is divided into the inner and outer region. The inner solution based on discrete membrane dynamic model and simple-source distribution over the entire fluid boundaries is matched to the outer solution ba~ed on an eigenfunction expansion method. The numerical results were compared to a series of Ohyama's experimental results. The measured reflection and tran¬smission coefficients reasonably follow the trend of predicted values. Using the computer program developed, the performance of a bottom-mounted and fluid-filled flexible membrane strocture is tested with various system parameters (membrane shape, internal pressure, density ratio) and wave characteristics (wave frequencies, incident wave angle). It is found that a bottom-mounted and fluid-filled flexible membrane structure can be an effel;tive wave barrier if properly designed.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.19-26
• /
• 1983

A study was designed to investigate the sorption characteristics of binary mixtures of NaCl and sucrose or glucose stored at various relative humidities ranging from 46% to 92%. At low relative humidity below RH 65%, the sorption equilibrium was easily achieved, whereas at higher relative humidity values over 73%, all of the mixtures tended to cintinously absorb moisture with increase in storage time. A linear equation of log $({\frac{dw}{dt}})$ = a log(t) + log(b) was found to be valid between the sorption rate and storage time with respect to storage humidities. In sucrose-NaCl mixture, the slope showed a increasing tendency as the percentage of NaCl increased in the mixture, while that of glucose-NaCl mixture failed to show a definite trend. Plateaus were obtained when the amount of water absorbed was plotted on the X axis and the percent composition of mixture on the Y axis at different storage time. The shape of plateau was varied with respect to the kind of sugar-NaCl mixture, composition of the mixture and relative humidities. A linearity was found between log(1-Aw) and the amount of water absorbed over the Aw range 0.73-0.92 and the slope was affected by the kind and composition of sugar-NaCl mixtures.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.147-152
• /
• 2015

In order to develop the cooling load estimation method in the greenhouse, the cooling load calculation formula based on the heat balance method was constructed and verified by the actual cooling load measured in the fog cooling greenhouse. To examine the ventilation heat transfer in the cooling load calculation formula, we measured ventilation rates in the experimental greenhouse which a cooling system was not operated. The ventilation heat transfer by a heat balance method showed a relatively good agreement. Evaporation efficiencies of the two-fluid fogging system were a range of 0.3 to 0.94, average 0.67, and it showed that they increased as the ventilation rate increased. We measured thermal environments in a fog cooling greenhouse, and calculated cooling load by heat balance equation. Also we calculated evaporative cooling energy by measuring the sprayed amount in the fogging system. And by comparing those two results, we could verify that the calculated and the measured cooling load showed a relatively similar trend. When the cooling load was low, the measured value was slightly larger than calculated, when the cooling load was high, it has been found to be smaller than calculated. In designing the greenhouse cooling system, the capacity of cooling equipment is determined by the maximum cooling load. We have to consider the safety factor when installed capacity is estimated, so a cooling load calculation method presented in this study could be applied to the greenhouse environmental design.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.3
• /
• pp.279-291
• /
• 2015

Objective: The purpose of the study is to evaluate appropriate weight for aged farmers in manually handling livestock feed in bags using ergonomic methods. Background: In the livestock industry in South Korea, despite the trend of aging of labor manpower, heavy items are still manually handled in many farms. In particular, among stockbreeding works, the handling of feed in bags weighing 25~30kg is reported as a cause of frequent injuries and musculoskeletal system diseases. However, studies on the standard for recommended weight allowed considering the physical characteristics of aged farmers older than 60 years with greatly decreased physical strength and muscle strength are insufficient. Method: To evaluate appropriate weight for handling of heavy livestock feed in bags, physical techniques for measuring recognized levels of physical work loads, the NLE (NIOSH lifting equation) a method that is an observation type technique, and an ergonomic modeling technique to predict compressive force imposed on L5/S1 were used. Subjects who participated in the experiment were organized into two groups of males/females with mean age exceeding 60 years, and lifting tasks were evaluated for nine weight levels. Results: Based on the results of psychophysical measurement, females showed a tendency of more drastic increases compared to males when weight was over 19kg. The results of estimation of regression models for the weight, 18.0 kg ($r^2=0.97$) and 15.3kg ($r^2=0.97$) were evaluated as stable load for males and females, respectively. In addition, both the observation type evaluation and ergonomic model evaluation showed stable loads in a range of 15~18kg. Conclusion: Given the results of the study, the weight of the feed in bags currently distributed to farms can become a cause of not only overexertion but also farm work related disasters such as musculoskeletal disorders and safety accidents. Providing livestock feed in bags weighing not more than 19kg for aged farmers is judged desirable, and managerial improvement for this matter is considered necessary. Application: The results of the present study can be utilized as useful data for institutional improvement of the weight of livestock feed in bags.

• Journal of the Korean School Mathematics Society
• /
• v.9 no.1
• /
• pp.105-120
• /
• 2006

The Seventh Curriculum makes sure that those students who don't have a proper understanding of contents required at a certain stage take a remedial course. But a trend contrary to the intention is formed since there is no systematic education for such a course and thus more students get to fall into the group of low achievement. In particular, solving a simultaneous equation in a rote way without understanding influences negatively students' achievement. Schoenfeld introduced the basic elements of one's own mathematical problem solving process and behavior, referred to Polya's. Employing Schoenfeld's strategy, this study aimed to induce students' active participation in math classes, as well as to focus on a mathematical problem solving process during the study. Two students were selected from a remedial course at 00 Middle School and administered with a qualitative case study method over 17 lessons, each of which lasted for 30 minutes. In the beginning, they used such knowledge as facts and definitions a lot. There was a tendency of their resorting to intuitive knowledge more when they lacked basic knowledge or met with a difficult question. As the lessons were given, however, they improved their ability to implement algorithm procedures and used more familiar ones with the developed common procedures in the area of resources.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.63-69
• /
• 2008

The characteristics of the spread of a forest fire are generally related to the attributes of combustibles, geographical features, and meteorological conditions, such as wind conditions. The most common methodology used to create a prediction model for the spread of forest fires, based on the numerical analysis of the development stages of a forest fire, is an analysis of heat energy transmission by the stage of heat transmission. When a forest fire breaks out, the analysis of the transmission velocity of heat energy is quantifiable by the spread velocity of flame movement through a physical and chemical analysis at every stage of the fire development from flame production and heat transmission to its termination. In this study, the formula used for the 1-D surface forest fire behavior prediction model, derived from a numerical analysis of the surface flame spread rate of solid combustibles, is introduced. The formula for the 1-D surface forest fire behavior prediction model is the estimated equation of the flame spread velocity, depending on the condition of wind velocity on the ground. Experimental and theoretical equations on flame duration, flame height, flame temperature, ignition temperature of surface fuels, etc., has been applied to the device of this formula. As a result of a comparison between the ROS(rate of spread) from this formula and ROSs from various equations of other models or experimental values, a trend suggesting an increasing curved line of the exponent function under 3m/s or less wind velocity condition was identified. As a result of a comparison between experimental values and numerically analyzed values for fallen pine tree leaves, the flame spread velocity reveals a prediction of an approximately 10% upward tendency under wind velocity conditions of 1 to 2m/s, and of an approximately 20% downward tendency under those of 3m/s.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.371-379
• /
• 2004

Soil investigation data at 7 different locations around Honam costal region were analyzed and experimental correlations between soil properties and parameters of soft clay were presented. Most soils were classified as CL and CH by the Unified Soil Classification System and were unstable structurally because the water contents were generally greater than the liquid limits. The compression index has good correlations with water content, liquid limit and initial void ratio. The trend of these correlations were similar to the Skempton equation Cc = 0.009(LL -10) and other studies for Korean soft clays but the constants were small different. The slope of these correlations for Honam costal region were slightly greater than those for Kyunggi costal region and Kyungnam costal region. The correlation coefficient (R) between the liquid limit and the plastic index is 0.93. It is seen that not only the water content and the liquid limit but also the water content and the initial void ratio are correlate, therefore the experimental equations were presented for the practical purpose.