• 제목/요약/키워드: treatment cost.

검색결과 2,218건 처리시간 0.03초

치과를 주소로 응급실에 내원한 소아청소년의 특성과 경향성 (National Patterns and Characteristics in Pediatric Dental Emergency Visits for Dental Conditions)

  • 모성은;지명관;이제우;김재곤;양연미;레반낫탕;이대우
    • 대한소아치과학회지
    • /
    • 제49권2호
    • /
    • pp.188-196
    • /
    • 2022
  • 이 연구의 목적은 2002년부터 2015년까지 건강보험심사평가원 자료를 이용하여 대한민국 만 20세 미만 소아청소년의 치과를 주소로 응급실 방문 특성과 경향성에 대하여 조사하는 것이다. 연구 대상은 대한민국 전체 인구 중 2%인 약 100만 명을 무작위 표본 추출하여 만 20세 미만의 소아청소년들과 만 20세 이상의 성인들로 나누어 주상병, 성별, 지역, 소득수준 및 요양급여 비용에 대해 비교 분석하였다. 소아청소년에서 응급실 방문 비율은 비외상성 주상병보다 외상성 주상병에서 더 높게 관찰되었다. 비외상성 주상병의 비율은 소아청소년이 성인보다 낮았으며, 특히 입의 연조직염 및 농양(K12.2)과 치은염 및 치주질환(K05)에서 유의미한 차이를 보였다. 고소득 가구의 소아청소년이 저소득 가구의 소아청소년보다 응급실에 더 많이 내원하는 것으로 조사되었다. 소아청소년의 치과 응급 진료의 연도별 경향성은 표본 수가 적어 확인할 수 없었으나 소아청소년의 치과를 주소로 응급실에 내원하는 특성을 성인과 비교 및 분석이 가능하였다. 추후 연구에서 시간에 따른 유의미한 경향성을 파악하기 위해서는 표본 연구 자료가 아닌 맞춤형 자료를 이용한 연구가 필요할 것으로 보인다.

플래시 기반 유기금속화합물 열처리를 통한 고성능 유연 전극 제조 (Flash Lamp Annealing of Ag Organometallic Ink for High-Performance Flexible Electrode)

  • 우유미;이동규;황윤식;허재찬;정성민;조용준;박귀일;박정환
    • 한국전기전자재료학회논문지
    • /
    • 제36권5호
    • /
    • pp.454-462
    • /
    • 2023
  • 금속 나노 입자의 플래시 램프 어닐링 공정은 빠른 가공 속도(밀리초 단위), 저온 공정, 롤투롤 공정과의 호환성 등 이유로 유연한 기판 위에 고성능 전극을 제조하기 위한 강력한 솔루션으로 제공되어 왔다. 그러나 금속 나노 입자[예를 들면, 금(Au), 은(Ag), 구리(Cu) 등]는 저온 공정을 위한 미세 금속 나노 입자(직경 10 nm 미만)의 제조가 어렵고, 고가이며, 잉크보관 및 플래시 램프 어닐링 과정에서 산화가 발생하는 등의 한계가 존재했다. 이러한 이유로 유기금속화합물 잉크는 금속 나노 입자를 대체할 수 있는 재료로서 저렴한 가격(기존 금속 나노 잉크 대비 1/100의 가격)과 저온 공정성, 높은 재료 안정성으로 인해 제안되었다. 하지만 이러한 장점에도 불구하고, 유기금속화합물의 플래시 램프 어닐링 처리를 통한 유연한 전극의 제조는 광범위하게 연구되지 않고 있다. 본 논문에서는 사전 경험 없이 은 유기금속화합물을 플래시 램프 어닐링하는 과정에서 발생할 수 있는 어려움을 최소화하기 위해 재료 매개변수와 플래시광 처리 매개변수(에너지 밀도, 펄스 지속시간 등)를 고려하여 유연 기판에 전극을 제조하기 위한 최적의 조건을 결정하는 방법을 실험적으로 가이드하고자 한다.

Development of a polystyrene phantom for quality assurance of a Gamma Knife®

  • Yona Choi;Kook Jin Chun;Jungbae Bahng;Sang Hyoun Choi;Gyu Seok Cho;Tae Hoon Kim;Hye Jeong Yang;Yeong Chan Seo;Hyun-Tai Chung
    • Nuclear Engineering and Technology
    • /
    • 제55권8호
    • /
    • pp.2935-2940
    • /
    • 2023
  • A polystyrene phantom was developed following the guidance of the International Atomic Energy Association (IAEA) for gamma knife (GK) quality assurance. Its performance was assessed by measuring the absorbed dose rate to water and dose distributions. The phantom was made of polystyrene, which has an electron density (1.0156) similar to that of water. The phantom included one outer phantom and four inner phantoms. Two inner phantoms held PTW T31010 and Exradin A16 ion chambers. One inner phantom held a film in the XY plane of the Leksell coordinate system, and another inner phantom held a film in the YZ or ZX planes. The absorbed dose rate to water and beam profiles of the machine-specific reference (msr) field, namely, the 16 mm collimator field of a GK PerfexionTM or IconTM, were measured at seven GK sites. The measured results were compared to those of an IAEA-recommended solid water (SW) phantom. The radius of the polystyrene phantom was determined to be 7.88 cm by converting the electron density of the plastic, considering a water depth of 8 g/cm2. The absorbed dose rates to water measured in both phantoms differed from the treatment planning program by less than 1.1%. Before msr correction, the PTW T31010 dose rates (PTW Freiberg GmbH, New York, NY, USA) in the polystyrene phantom were 0.70 (0.29)% higher on average than those in the SW phantom. The Exradin A16 (Standard Imaging, Middleton, WI, USA) dose rates were 0.76 (0.32)% higher in the polystyrene phantom. After msr correction factors were applied, there were no statistically significant differences in the A16 dose rates measured in the two phantoms; however, the T31010 dose rates were 0.72 (0.29)% higher in the polystyrene phantom. When the full widths at half maximum and penumbras of the msr field were compared, no significant differences between the two phantoms were observed, except for the penumbra in the Y-axis. However, the difference in the penumbra was smaller than variations among different sites. A polystyrene phantom developed for gamma knife dosimetry showed dosimetric performance comparable to that of a commercial SW phantom. In addition to its cost effectiveness, the polystyrene phantom removes air space around the detector. Additional simulations of the msr correction factors of the polystyrene phantom should be performed.

목포항 운송시스템의 분석에 관한 연구 (On the Analysis of Transportation System in Mokpo Port)

  • 남만우;이철영
    • 한국항만학회지
    • /
    • 제11권2호
    • /
    • pp.321-337
    • /
    • 1997
  • Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

  • PDF

섬유공장폐수 재이용 사례: 인도네시아 반둥을 대상으로 (Wastewater Reuse in Textile Industry: Case of Bandung, Indonesia)

  • 정영균;이미영;양시천;강석태
    • 적정기술학회지
    • /
    • 제5권1호
    • /
    • pp.18-24
    • /
    • 2019
  • 인도네시아 반둥인근에서 발원하여 수도인 자카르타인근 해역으로 연결되는 찌따룸강(Citarum river)은 공업 용수와 먹는 물로서 인근 산업 지역과 수도 자카르타의 주요 수자원(공업용수 및 음용수)으로 이용되고 있다. 그러나, 최근 찌따룸강은 처리되지 않은 생활하수 및 섬유산업 폐수로 심각하게 오염되고 있으며, 건기에는 무분별한 지하수 개발로 인해 지하수위가 급속히 하강하는 문제가 발생하고 있다. 따라서, 본 사업에서는 반둥 인근의 섬유공장에서 발생하는 폐수를 재이용하여, 찌따룸강 오염문제와 지하수위 하강문제를 해결하고자 하였다. 이를 위해 수처리용 가압부상장치(DAF)를 개량한 공법인 선회식 가압부상장치(CYFLOAT) 시스템을 인도네시아 현장에 맞게 개선하여 100 톤/일 용량 규모로 설치 및 운전하였다. 설치한 선회식 가압부상장치 시스템은 섬유 폐수 재이용 시 가장 중요한 수질기준 중 하나인 부유물질(SS)을 약 40분의 체류 시간 동안 96.8% 제거하였을 뿐만 아니라, 공간사용 및 유지관리측면에서도 매우 유리한 것으로 확인되었다. 또한, 본 기술의 설치와 운영에 현지 관련기관들(UNPAR 및 ITB, PU SKIM)을 참여시켜, 해당 기술이 인도네시아 찌따룸강 유역의 섬유공장 밀집지역내 지속적으로 적용 가능하도록 하였다.

연부조직 종양의 진단적 접근 (Diagnostic Approach to a Soft Tissue Mass)

  • 전영수;송승현
    • 대한정형외과학회지
    • /
    • 제54권4호
    • /
    • pp.293-301
    • /
    • 2019
  • 사지와 몸통의 연부조직 종양은 정형외과 의사가 직면할 수 있는 흔한 문제이다. 비록 연부조직 종양은 대부분 양성이지만 정형외과 의사는 양성과 악성 종양을 구별할 수 있는 특징을 알고 있어야 한다. 연부조직 종양의 임상적 특징 및 역학을 이해하게 되면 올바른 진단 및 수술적인 치료를 할 수 있게 된다. 종양의 크기와 깊이는 종양의 진단을 위해 가장 중요한 요소이다. 종양의 감별 진단을 하기 위해서 우선적으로 상세한 병력청취와 자세한 신체 검사가 필요하며, 이후 단순 방사선 촬영, 초음파, 자기공명영상(magnetic resonance imaging), 양전자 방출 단층촬영술(positron emission tomography), 컴퓨터 단층촬영(computed tomography), 뼈 스캔, 혈관 조영술 등의 다양한 영상 촬영법을 사용하여 종양을 진단하고 진단된 종양의 특성을 확인하여야 한다. 특히 초음파 검사는 외래에서도 쉽게 수행할 수 있어 유용하다. 그러나 검사자의 숙련도에 따라 검사 정확도의 차이가 발생할 수 있다는 단점이 있다. 종양의 생검을 통한 조직검사는 종양에 대한 모든 영상 검사를 시행한 후 최종적으로 시행하는 것이 원칙이다. 조직 검사를 시행할 때는 세심한 주의를 기울여야 하며, 최종적인 진단 후에는 치료를 위해 다각적인 접근을 시행하여야 하며 필요한 경우에는 경험 있는 근골격계 종양전문의사에게 의뢰하는 것이 필요하다.

인공수정 횟수가 모돈의 번식성적에 미치는 영향 (Effect of Artificial Insemination Frequency on Reproductive Performance in Sows)

  • 홍진수;김송산;방림호;김유용
    • 농업생명과학연구
    • /
    • 제50권5호
    • /
    • pp.183-188
    • /
    • 2016
  • 본 연구는 인공수정 횟수가 모돈의 번식성적에 미치는 영향을 알아보기 위하여 수행되었다. 총 48두의 F1 모돈(Yorkshire×Landrace)을 공시하였으며, 완전임의화배치법(CRD)에 의하여 4개의 처리구에 배치되었다. 처리구는 인공수정 횟수(1회, 2회, 3회, 4회)이며, 발정확인 후 12시간 뒤부터 인공수정을 진행하였다. 모돈의 발정확인은 9시와 21시에 웅돈을 접촉시켜서 확인하였으며, 재귀발정일은 5-6일인 모돈들을 대상으로 구배치 하였다. 모돈의 승가허용 확인 후 12시간 간격에 따라 9시와 21시에 처리구에 따른 인공수정을 실시하였다. 인공수정 횟수가 모돈의 임신율, 수태율에는 유의적인 영향을 미치지 않으며, 분만율에서는 3회 인공수정한 처리구가 다른 처리구들에 비해 낮은 수치를 보였다. 총산자수, 생시자돈수, 복당체중과 같은 분만성적에서도 인공수정 횟수에 따른 통계적 차이는 나타나지 않았다. 인공수정 횟수의 1회 감소는 7,000원의 정액비용을 절감할 수 있다. 따라서 발정확인 후 인공수정을 1회하여도 다른 처리구들과 비교해 동일한 번식성적을 가지며, 1회 인공수정을 통한 정액비용의 감소는 농가의 생산비를 절감할 수 있을 것으로 사료된다.

Evaluation of Soil Streptomyces spp. for the Biological Control of Fusarium Wilt Disease and Growth Promotion in Tomato and Banana

  • Praphat, Kawicha;Jariya, Nitayaros;Prakob, Saman;Sirikanya, Thaporn;Thanwanit, Thanyasiriwat;Khanitta, Somtrakoon;Kusavadee, Sangdee;Aphidech, Sangdee
    • The Plant Pathology Journal
    • /
    • 제39권1호
    • /
    • pp.108-122
    • /
    • 2023
  • Fusarium oxysporum f. sp. lycopersici (Fol) and Fusarium oxysporum f. sp. cubense (Foc), are the causal agent of Fusarium wilt disease of tomato and banana, respectively, and cause significant yield losses worldwide. A cost-effective measure, such as biological control agents, was used as an alternative method to control these pathogens. Therefore, in this study, six isolates of the Streptomyces-like colony were isolated from soils and their antagonistic activity against phytopathogenic fungi and plant growth-promoting (PGP) activity were assessed. The results showed that these isolates could inhibit the mycelial growth of Fol and Foc. Among them, isolate STRM304 showed the highest percentage of mycelial growth reduction and broad-spectrum antagonistic activity against all tested fungi. In the pot experiment study, the culture filtrate of isolates STRM103 and STRM104 significantly decreased disease severity and symptoms in Fol inoculated plants. Similarly, the culture filtrate of the STRM304 isolate significantly reduced the severity of the disease and symptoms of the disease in Foc inoculated plants. The PGP activity test presents PGP activities, such as indole acetic acid production, phosphate solubilization, starch hydrolysis, lignin hydrolysis, and cellulase activity. Interestingly, the application of the culture filtrate from all isolates increased the percentage of tomato seed germination and stimulated the growth of tomato plants and banana seedlings, increasing the elongation of the shoot and the root and shoot and root weight compared to the control treatment. Therefore, the isolate STRM103 and STRM104, and STRM304 could be used as biocontrol and PGP agents for tomato and banana, respectively, in sustainable agriculture.

프리캐스트 콘크리트 더블월 시스템의 각형 강관 연결부 성능평가 (Evaluation of Steel Tube Connection in Precast Concrete Double Wall System)

  • 서유재;주현진
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권2호
    • /
    • pp.25-32
    • /
    • 2023
  • 이 연구에서는 기존 프리캐스트 콘크리트 (Precast concrete, PC) 더블월 시스템의 복잡한 제작 공정을 간소화하면서 콘크리트 패널 형성 시 발생할 수 있는 레이턴스 등의 결함을 제거하고자 고안된 새로운 PC 더블월 공법을 소개하고 이때, PC 패널이 운반 또는 현장 콘크리트 타설 시 손상되지 않고 간격을 유지하는 역할을 하는 각형 강관에 대한 인장저항 성능을 규명하기 위한 실험적 연구를 수행하였다. 각형 강관의 단부 상세를 변수로 인장실험을 계획하였으며 개구부 형성에 따른 강판의 처리방법, 매립 콘크리트의 존치 유무, 추가적인 장부작용 확보를 위한 철근용접 등을 변수로 설정하여 효과적인 강관 단부 상세를 도출하고자 하였다. 결과적으로, 강관 단부의 측면을 절개한 강판을 강관 단부 방향 안쪽으로 절곡한 강관 실험체 (ST_CP)를 제외하고 기준실험체 (ST)에 비하여 20~30% 가량 증가한 최대 인장강도를 나타내었다. 기준실험체 내부에 콘크리트를 채운 실험체 (ST_CON)가 PC 더블월 제작 시 구성되는 각형 강관 연결부와 유사한 상세를 가지며 추가적인 시공과정과 비용이 요구되지 않으므로 가장 적합한 연결상세인 것으로 판단된다.

조건부가치추정법을 활용한 제주지역 해외수용력 연구 (A Study on Population Capacity in Jeju by Contingent Valuation Method)

  • 방호진;박영현;조장희
    • 무역학회지
    • /
    • 제45권4호
    • /
    • pp.137-152
    • /
    • 2020
  • The increase in national income, the expansion of transportation network, the increase in leisure time, and the influx of foreign tourists in the era of internationalization, the influx of the outside population of Jeju region increased rapidly until 2020. However, the corona 19 (Covid-19) incident that began in January 2020 has hit the entire industry, and the tourism industry in Jeju has also been greatly damaged. However, in the second half of 2020, with some calming of the Corona 19 situation and difficult to leave overseas, the number of visitors to Jeju Island is increasing again as Koreans choose Jeju Island as their domestic tourism. This study analyzed the capacity of Jeju's external population based on the Contingent Valuation Method, and based on this, attempted to suggest policy recommendations for Jeju. The size of accommodations such as the density of visitors, toilets, and rest areas were excluded from consideration, and the level of securing the parking lot already exceeded the capacity, and the rate of securing the parking lot was 93.4%. In the case of accommodation, the total number of available rooms is 88,691, even if one guest per room is assumed, which is 32,372,215 per year, which is sufficient in terms of visitor capacity. To analyze the aspects of psychological capacity, this study analyzed whether the residents are feeling psychological discomfort through three methods of road congestion, garbage disposal, and sewage treatment through Contingent Valuation Method. However, the inconvenience caused by the increase of visitors and the effect of continuous population influx is working in combination, and it has the limitation that the effects of these independent factors cannot be specifically separated. As a result of the study, discomfort has already been recognized in terms of psychological capacity among the factors of capacity, and it was estimated that a cost of about 45 billion won per year was incurred as a result of deriving psychological costs through Contingent Valuation Method. In the future, a policy review is needed to resolve or maintain the perception of this discomfort through continuous management. Accordingly, it is necessary to recognize that the increase of visitors leads to the psychological discomfort of the residents, and to seek a policy alternative that can simultaneously increase the number of visitors and the comfort of the residence.