Jo, Jin Seok;Okyere, Frank Gyan;Jo, Jae Min;Kim, Hyeon Tae
Journal of Biosystems Engineering
/
v.43
no.3
/
pp.202-210
/
2018
Purpose: Due to the growing demand for vegetables all year round, the use of vegetable transplanters has become widespread in agricultural production. However, the type of planting device used for the transplanter affects its overall efficiency. Problems such as inaccurate planting angles and inefficiently wide transplanting hole diameters of the planting device has limited the efficient use of some vegetable transplanters. Our goal in this study was to improve the efficiency of the transplanter by analyzing and modifying the linkages of the planting device of a vegetable transplanter. Methods: Because of its widespread usage in Korea, a linkage-type planting device was used for the experiment, which was divided into three parts. In the first part, the physical trajectory of the tranplanter was extracted using a CCD (charge-coupled device) camera and analyzed. In the second part, a simulated trajectory was developed using Recurdyn 3D software. The simulated and actual trajectories were then compared and analyzed. In the third part, based on the results of the comparison, improvements were made on the linkages of the transplanter and a demonstrative exercise was conducted. Finally, in experiment B, the performance was evaluated through an exercise using both the existing and improved planting devices. Results: The results demonstrated that the average planting angle was improved by 4.96 mm, the soil intrusion diameter was improved by 11.30 mm, and the planting depth was improved by 0.68 mm. Conclusion: It was concluded that the efficiency of a vegetable transplanter can be improved by modifying the linkages through simulations and field demonstrations.
Electric drive technology is continually advanced to improve fuel efficiency in the automobile industry. It could improve the fuel efficiency of automobiles by 50% as well as agricultural machinery. The purpose of this study was to measure and analyze the power and current of an electric transplanter based on the planting distances during field operations. The electric transplanter was constructed by mounting the major components of a motor drive system onto a transplanter. The electric transplanter had a 3 kW motor power, and the major components included an inverter, battery, and a battery management system (BMS). The field tests were conducted by travelling at two speeds (300 and 760 mm/s) and by planting at three distances (260, 420 and 630 mm) with the working speed (300 mm/s), during travelling and transplanting. The results showed that the required power increased when the travelling speed was fast. One-way ANOVA for the planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the motor power using statistical analysis software. In addition, the required power increased when the planting distances were short at every working condition. The results of this study would provide useful information for the development an electric transplanter.
This study was conducted to develop a robotic transplanter for bedding plants. The robotic transplanter consisted of machine vision system, manipulator attached with the specially designed gripper, and plug tray transfer system. Results of this study were as follows. 1. A machine vision system for a robotic transplanter was developed. The success rates of detecting empty cells and bad seedlings in 72-cell and 128-cell plug-trays for cucumber seedlings were 98.8% and 94.9% respectively. The success rates of identifying leaf orientation for 72- cell and 128-cell plug-trays were 93.5% and 91.0%, respectively. 2. A cartesian coordinate manipulator for a robotic transplanter with 3 degrees of freedom was constructed. The accuracy of position control was $\pm$ 1mm. 3. The robotic transplanter was tested with a shovel-type finger. Without considering leaf orientation, the success rates of transplanting healthy cucumber seedlings for 72-cell and 128-cell plug-trays were 95.5% and 94.5%, respectively. Considering leaf orientation, the success rates of transplanting healthy cucumber seedling in 72-cell and 128-cell plug-trays were 96.0% and 95.0%, respectively.
An automatic seedling transplanter, employed an innovative plug-seedling feeder was developed by improving the problems of conversational feeding and transplanting mechanisms. With conventional methods, missing and damage rates of seedling were high for long seedlings over 20cm and also breaking seed-bed was frequently observed. Thus, a pushout-bucket slide-hopper type trandsplanter was devised and tested. Test results of picking and transferring accuracies of the developed transplanter are as follows : A prototype transplanter performed with 1.5% of missing rate. The deviations of horizontal feed ranged from -0.3mm to 2.8mm and averaged 0.673mm for the 128-hoe test tray : and ranged from -lmm to +3mm and averaged 0.785mm for the 200-hole test tray. The deviations could decrease with precise manufacturing and lightening the mechanism. The maximum and deviations of vertical feed were -2.3mm and + 1mm, respectively, for the 128-hole test tray ; and were +3mm and +2.5mm, respectively, for the 200-hole test tray. The missing rate, seeding bruise rate and seed-bed damage rate were esitmate to be 1.3%, 0.4% and 3.5%, respectively, with the developed automatic transplanter.
This study was conducted to develope a machine vision system for a robotic transplanter for bedding plants. Specific objectives of this study were 1) to get coordinates of the healthy seedlings in high-density plug tray, and 2) to get the angle of the leaves of the healthy seedlings to avoid the damage to seedlings by gripper. Results of this study were summarized as follows. (1) The machine vision system of a robotic transplanter was developed. (2) Success rates of detecting empty cell and bad seedlings for 72-cell and 128-cell plug-trays were 98.8% and 94, 9% respectively. (3) Success rates of calculating the angle of leaves fer 72-cell and 128-cell plug-trays were 93.5% and 91.0% respectively.
A wireless control system was designed and constructed to control the rice transplanter of walking type with remote control. VHF(very high freqency) was sent from wireless transmitter to wireless reciever by usig 6 channels to control main clutch, steering clutch, plant lever and throttle lever within 200 meter distance between remote control and rice transplanter. The rice transplanter with wireless control system showed good performance for accuracy of travel speed, traveling mobility and turning diameter in the concrete, paddy and dry field. It is concluded that the developed wireless control system could be adapted to control not only conventional rice transplanters but also most of the agricultural machine by changing some parts of the control system.
Lettuce seedlings used in this investigation of planting distance and labor-saving efficiency were first grown in 100-hole paper trays for 30 days. Seedling height for transplanting ranged from 3 cm to 6 cm and plants had 3 to 5 leaves. The beds prepared for transplanting were of the arched type and were 35-40 cm in width, 15-20 cm in bed height, and between-bed furrow width was 20 30 cm. Typical seedling planting depth with the transplanter was 4-5 cm, although depth was quite variable because of the irregularities of the ground. Total transplanting time with the transplanter varied from 2.6 to 2.7 hours per 10a, while it took 38.1 hours per 10a with conventional planting. It was critical that the condition of both the seedlings and the bed be adjusted to the transplanter before planting. Considering yield and inter-plant distance, optimal transplanter performance resulted with $60{\times}20cm$ or $60{\times}25cm$spacing, and the labor-saving efficiency using the transplanter was improved by over 93% of that of conventional planting by hand.
Magazine of the Korean Society of Agricultural Engineers
/
v.21
no.3
/
pp.83-91
/
1979
This study was conducted in order to find out the performance of rice transplanters in accordance with the change of the trans-planting days after pudding and the water depth flooding the paddy field at the time of transplanting : and thus to select the optimum paddy field preparation procedures for an efficient utilization of rice transplanters. The performance factors of the two different types of rice transplanters were measured during the first 6 consecutive days after puddling and with 3 different levels of water depth flooding the paddy fields. The results of this study were analysed and summarized as follows : 1. Wheel sinkage decreased very rapidly from 0 to 2 days after puddling and slowly from 3 to 5 days after puddling. 2. The depth of the test cone penetration decreased rapidly during the first few days after puddling. It was 17.8cm just after puddling, and decreased to 13.4cm one day after puddling. After 2 days, the rate of decrease was dampened, and after 5 days it kept constant value of 9.2cm. 3. Two days after puddling, the hill interval was 15.8cm (98.75% of the preset value) for broadcasted seedling rice transplanter with 3cm flooding depth : This value was the closest to the pre-adjusted value of 16cm. The general performance of broadcasted-seedling type rice transplanter was better than that of strip-seedling type rice transplanter. 4. Usually the working performance of a rice transplanter is evaluated with uniformity and adjustability of the hill intervals. The hill interval was the most uniform and closest to the pre-set value of 16cm when planted two days after puddling with 3cm of water depth. When it was inavoidable to plant 4 days after puddling with stripseedling type rice transplanter, it is advisable to let the water flooded somewhat deeper. 5. The percentage of missing hills including floating and burried seedlings was the highest just after puddling and ie decreased substancially until 3 days after puddling and then it increased again. Hence, the optimal time transplanting is to be between 2 and 3 days after puddling. 6. Better postures of planted seedlings were found when planter 2 days after puddling than 3 days after puddling. Six cm of flooding water depth always gave the best results with respect to the postures of planted seedlings. Broadcasted-seedling rice transplanter, in general, showed better posture of planted seedlings than did strip-seedling type rice transplanter. 7. Judging from the above results, the optimal conditions will be 3cm of flooding depth and transplanting between 2 and 3 days after puddling.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2000.11c
/
pp.827-834
/
2000
A granular herbicide applicator attached to conventional ride-on rice transplanter with 6 rows was developed in order to carry out both transplanting and herbicide application at once. It resulted in labor saving by 98%. The prototype is composed of a metering device and a spinning disc spreader. The application rate per 10a can be varied from 1 to 3 kg and the application swath is 1.8 m, which is the planting width of the ride-on rice transplanter with 6 rows. The angular speed of spinning disc and the application height were used as design factors to obtain the uniform distribution of herbicide granules. As the result of experiment, the distribution uniformity showed a tendency to be proportional to the increases of both spinner angular speed and application height. The prototype with angular speed of spinning disc of 7359 rpm and the application height of 20 cm was made and its distribution uniformity was relatively uniform with the CV(coefficient of variation) of 21.7%. In field test, when the tested herbicides such as ACl40+Stomp and Londax+YRC were applied, the weed control has continued for 65 days since transplanting was done.
Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.