• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.21-31
• /
• 2019

With the development of the aviation industry, aircraft painting design also plays the role of transmitting the national image while conveying the individual image of the airline. The recognition and recognition of the national image can be obtained by building a national brand. As a result, more and more companies are using the national brand image of their own country or other countries to add value to the company. Objective: To better reflect the national brand recognition for the design of the tail fin in the future aircraft painting design. This paper mainly studies the correlation between the tail graphic elements of aircraft painting design and national brand recognition based on the tail graphics of the three major airline alliance members. Based on the prior research, the relevant hypotheses were proposed and the questionnaire was designed. Secondly, a questionnaire survey was conducted on the passengers using the aircraft, and the correlation analysis was performed on the data by the SPSS regression analysis method. Conclusion: Data analysis has a strong correlation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1099-1116
• /
• 2019

Industrial control systems(ICS) are widely used in various industrial area and critical infrastructure. To mitigate security threats on ICS, the security assurance test for industrial control devices has been introduced and operating. The test includes testing of the security function of the device itself and testing of communication robustness. In this paper, we describe the security requirements of EDSA, Achilles, and Korea's TTA standard(security requirements for ICS). And also, we analyzed the characteristics of communication robustness test(CRT) of each certification. CRT verifies the device's operation of essential function while transmitting fuzzing and stress packets. Existing test methods are mostly focused on the embedded devices and are difficult to apply to various devices. We propose a method to test communication robustness which reflect the characteristics of control H/W, control S/W, field devices and network devices in ICS. In the future, we will apply the proposed communication robustness test to actual products and present solutions for arising issues.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.17-23
• /
• 2020

In this paper, collecting real-time data frames that occur during RS232 communication between an HMI and PLC of automation equipment by sniffing real-time information data frames through MCU without modification of the HMI or PLC, a method is proposed that allows users to collect data without being dependent on the modification of PLC and HMI systems. The user collects necessary information from the sniffing data through the parsing operation, and the original communication interface is maintained by transmitting the corresponding sniffing frame to the destination. The MCU's UART communication interface circuit is physically designed according to the RS232 communication standard, and this additionally improves efficiency more so than an interrupt-based system by using the DMA device inside the MCU. In addition, the data frame IO operation is performed by logically separating the work of the DMA interrupt service routine from the work of the main thread using the circular queue. Through this method, the user receives the sniffing data frame between the HMI and PLC in RS232 format, and the frame transfer between PLC and HMI arrives normally at the original destination. By sniffing the data frame without further modification of the PLC and HMI, it can be confirmed that it arrives at the user system normally.

• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.116-121
• /
• 2017

In this paper, a Raman spectrometer is designed to detect chemicals contaminating the ground. The system is based on Raman spectroscopy, which is spectral analysis of scattered light from chemicals, induced by a laser. The system consists of a transmitting-optics module with a laser to induce Raman-scattered light from the sample, a receiving-optics module to collect the scattered light, and a spectrograph to separate the collected light into a wavelength spectrum. The telescope, a part of the receiving-optics module, is designed to produce a focal spot in the same position for variable measurement distances using the code V simulator, considering the distance change between the system and the road. The Raman spectra of 12 chemicals on a glass surface and on a concrete sample were measured. Intensity differences between the Raman spectra acquired on a glass surface and on a concrete sample were observed, but the characteristics of the spectra according to the chemicals on them were similar. Additionally, the Raman spectrum of PTFE (polytetrafluoroethylene) was measured at various distances. The measured and simulated optical throughputs were similar. In conclusion, it is confirmed that with this system the Raman spectrum can be measured, irrespective of the distance change.

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.79-95
• /
• 2021

This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.265-271
• /
• 2021

Nanoparticles are substances that are smaller in size and smaller than cells that make up the skin. Therefore, they are very suitable as mediators for transmitting drugs or genes across cell membranes, and also deliver specific ingredients into the skin.In this study, nanoparticles were extracted from mugwort and particles of around 100 nm were obtained through dynamic light scattering (DLS), and the results of concentration-dependent enhancement of cell viability in fibroblasts were obtained through MTT assay. In addition, it was confirmed that the COL1A1 mRNA expression level was increased and the IL-6 mRNA expression level was decreased through the quantitative real-time PCR analysis method. Moreover, as these nanoparticles were confirmed to be stable, they can be applied not only to cell experiments but also to cosmetic formulations. While the demand for plant-derived ingredients continues to increase, excluding chemical ingredients from the recent cosmetics industry trend, there is a limitation in that there are few research results suggesting the application field of plant-derived nanoparticles. Therefore, in order to overcome the limitations of the cosmetic industry at the present time, the results obtained in this study present nanoparticles derived from Artemisia princeps (NDAP) as a highly functional cosmetic material.

• 한국사회정책
• /
• v.25 no.4
• /
• pp.265-299
• /
• 2018

The pilot project for type diversification of self-sufficient support center that convert the centre corporation into social cooperative was introduced in 2015. That aimed to increase the number of participants of self-sufficient programmes and to create more jobs for the working poor through expanding the center's autonomy of usage of budget and arrangement of self-sufficient programmes. This study analyzed the organization transmitting processes and changes of the centers took part in the pilot project, then aimed to suggest the improvement schemes to be helpful for reinforcing positive efforts and removing obstacles in the process converting. The results show that converting into social cooperative is a choice for the sustainability of the centers led by surroundings rather than self-initiated plan. There are some positive changes that are increasing the enterprising spirit and obligation of the center staff. Further more, the cooperation with other community organizations is enhanced based on achieving regional recognition, and support of local governments and the opportunity for new businesses are expanded. However, these are very limited in the regions where social economy is undeveloped. Eventually, we should seek the development schemes of the pilot project considering the reduction of the number of participants in self-sufficient programmes and decreasing of their ability to work, even if some positive aspects are revealed.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.653-666
• /
• 2019

This study is designed to find out the protection system of intangible cultural property as the current national policy and analyze the foundational problems in order to suggest the future vision in a way of transmitting the traditional cultural heritage to the descendants, based on the policy support for the intangible cultural property under the control of Commission for Ibuk 5-do (5 Northern Provinces of Korean peninsula). The research issue is first, the aging of the holders of the important cultural properties in Ibuk 5-do and the overcoming of the incomplete transmission system. The second issue is the protective policy of the transmission from the national perspective and the justification of the government's financial support. The third issue is the development of cultural contents by using the intangible cultural properties in Ibuk 5-do and the suggestion of the creative development for the resourcing of culture. As for the research methods, reference research and analysis on interview data and data from the related entities was done were analyzed and the results were actively adopted. The research results showed the followings to be required; first, the aged holders of the cultural properties shall be treated well and at the same time, the holders recognized to hold the transmission ability shall be dually designated. Second, the training system for the younger generation to keep the traditional cultural heritage shall be established; Third, the educational program and school education shall be extended so that the importance of the transmission of the intangible traditional cultural properties in Ibuk 5-do (northern 5 provinces of Korea) shall be recognized; Fourth, the recording system shall be constructed and its application system shall be required. In the end, in order for such development methods to be implemented effectively, active government support is desperately required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.472-482
• /
• 2019

This paper describes the stabilization of underwater TAS winch system Deploy/Recover operation performance. TAS winch installed on the stern of submarine performs to deploy/recover sensor, towing cable and rope tail which is deployed from the stern and separated from submarine itself. Also TAS winch provides transmission path of power to the sensor and data transmitting/receiving path which data are acquired from underwater environment like sound, depth and temperature. At the step of TAS winch evaluation test, sporadic standstill and rotating speed oscillation phenomenon were occurred. Winch motor provides the available torque to deploy/recover TAS and root cause analysis to the winch motor was done to find exact reason to sporadic malfunction. When winch motor was disassembled, eccentricity of rotor, slip-ring and the other composition part for winch motor were found. These might cause magnetic field distortion. To make TAS winch system more stable and block magnetic field distortion, this paper suggests methods to enhance fixing status installed in winch motor. For reliable data acquisition for TAS winch operation, the deploy/recover function of the improved type of TAS winch was verified in LBTS making similar condition with sea status. At the end of stage, improved type of TAS winch was tested on some functions not only deploy/recover function, but sustainability of TAS operation on specific velocity, steering angle of submarine in the sea trial. Improved type of TAS winch was verified in accordance with design requirement. Also, validity of suggested methods were verified by the sea trial.