• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.496-501
• /
• 2019

We propose a method to eliminate the noise of a disordered medium optical transmission matrix. Gaussian noise exists whenever light passes through the medium, during the measurement of the transmission matrix and thus cannot be ignored. Experiments and comparison of noise eliminating before and after are performed to illustrate the effectiveness and advance presented by our method. After noise elimination, the results of focusing and imaging are better than the effect before noise elimination, and the measurement of the transmission matrix is more consistent with the theoretical analysis as well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.534-542
• /
• 1998

In this paper a simulation model for the powertrain control of gasoline engines with automatic transmission is presented. A modular programming approach has been pursued and the MATLAB/SIMULINK has been utilized as the programming environment. The engine/transmission system is analyzed in the object-oriented fashion whereby easy transferal of the modules, which represent physical parts or analysis subsystems, is guaranteed. Some mathematical models are adopted from the literature to compare the simulation results with the model and the experimental results in the literature. It is expected that the whole program or individual module constructed in this paper are useful for the automotive engineers in designing a new engine/transmission system and/or in modifying parts of existing systems.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.44-50
• /
• 2006

A driver's feelings of transmission serve as a basis to judge not only the transmission but also the entire automobile that he or she drives. The importance of transmission feelings is increasing daily because of driver's desire for increased torque and other improved functions. In order to accommodate such desire of drivers, new friction materials have been developed. The study in this report compared the affects of such materials and the force for transmission theoretically and empirically. By doing so, the study attempted to establish basic references for computation of capacity and other factors to be determined at the time of design of synchronizer system.

• Journal of Information Processing Systems
• /
• v.16 no.2
• /
• pp.394-405
• /
• 2020

The parameters of transmission lines have an influence on the electromagnetic environment surrounding the line. This paper proposes a method based on phasor measurement unit (PMU) and supervisory control and data acquisition (SCADA) to achieve online estimation of transmission line full parameters, such as resistance, reactance and susceptance. The proposed full parameter estimation method is compared with the traditional method of estimating resistance independently based on SCADA system. Then, the electromagnetic environment is analyzed based on the different parameter estimation methods. The example results illustrate that online estimation of transmission line full parameters is more accurate in the analysis of electromagnetic environment, which further confirms its necessity and significance in engineering application.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.539-548
• /
• 1998

This study was intended to develop a load spectrum acting on a transmission of agricultural tractors. Transmission loads were measured at the input shaft of the transmission and final drive shaft of the tractors. The measurement were conducted in five field conditions at two speed levels under plowing operations in Korea. Two torque transducers were developed for the respective load measurements and other necessary instrumentations were made to collect the data and store them in a data logger. The time-histories of the torque loads were analyzed and transformed into the load spectra using the rainflow counting and Smith-Watson-Topper methods. Comparisons of the load spectra developed under different conditions were made to investigate their characteristics. The effects on the load levels of soil and plowing speeds were also investigated. Finally, a load spectrum combining the results of the spectrum analysis was developed and proposed as a load source for the reliability test of transmissions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.679-681
• /
• 2014

By this time, the study of mufflers has been progressed a lot. However, we don't have enough information about what some factors in muffler have an influence on transmission loss. So, we examined the tendency of the transmission loss depending on the porosity of perforated plates. We tested mufflers currently in use and changed porosity of perforated plates in mufflers to find out tendency of the transmission loss. As a result, the tendency of the transmission loss was shown differently depending on the position of perforated plate.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.36-42
• /
• 2018

Agricultural tractors require frequent shifting to improve operation efficiency, and PST (Powershift Transmission) is considered as a suitable transmission. However, due to the inherent characteristics of the PST, shocks arise during shifting, which imparts a negative effect on the operator. Therefore, in order to improve the transmission performance of the tractor PST, researches on various methods including the hydraulic system circuit, the engine input speed control, and the mechanical system of the transmission are steadily being conducted. In this study, in order to reduce the impact of PST on a shift based on SimulationX software, we analyzed the characteristics of the input signal of PCV (Pressure Control Valve) through sensitivity analysis and verified the simulation model through actual vehicle test. Optimization was performed for minimizing the shift shock for some of the parameters of the input signal at constant temperature and RPM conditions.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2007

In mobile ad-hoc wireless networks, one of the most important challenging issues is how to conserve energy, maximizing the lifetime of route(networks) in the view points of both power and mobility of nodes. However, many transmission methods presented in the previous works can not satisfy these two objectives simultaneously. To obtain these two goals, in this paper we propose an architecture to support power saving transmission services with route stability in mobile ad-hoc wireless networks. The proposed architecture consists of two parts, the underlying route stability method to support route(network) lifetime and the power saving transmission methods. The performance evaluation of the proposed architecture is achieved via simulation and analysis.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.189-195
• /
• 2012

In this paper, we propose a novel protocol called a Multi-hop Diversity Transmission protocol in which the retransmission is realized by a relay that is Nearest to a current Source (MDTNS). We derive the mathematical expressions of the packet error rate (PER) and the average number of transmissions over Nakagami-m fading channels, and verify them by Monte Carlo simulations. The simulation results show that the MDTNS protocol improves the performance of the network in terms of PER when compared to the Multi-hop Diversity Transmission protocol in which the retransmission is done by a relay that is Nearest to Destination (MDTND) and to the conventional multi-hop transmission (CMT) protocol.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.182-189
• /
• 2009

Nash equilibrium is usually used to investigate a generator's strategic bidding in electricity markets. Some literatures show that the transmission constraints may induce no pure strategy equilibrium and make it hard to find the equilibrium. Using an analytical approach to find a mixed strategy Nash equilibrium in electricity market with transmission constraints, we analyze the influence of transmission capacity on the mixed strategy Nash equilibrium. Finally, a simple numerical example is provided to support the claims of this paper.