• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.67-75
• /
• 2000

virtual computer numerical control(VCNC) arises from the concept that one can experience pseudo-real machining with a computer-numerically-controlled(CNC) machine before actually cutting an object. To achieve accurate VCNC, it is important to determine abnormal behavior, such as chatter, before cutting. Detecting chatter requires an understanding of the dynamic cutting force model. In general, the cutting process is a closed loop system the consists of structural and cutting dynamic. Machining instability, namely chatter, results from the interaction between these two dynamics. Several previous reports have predicted stability for a single path, using a simple cutting force model without run out and penetration effects. This study considers both tool run out and penetration effects, using experimental modal analysis, to obtain predictions that are more accurate. The machining stability during a corner cut, which is a typical transient cut, was assessed from an evaluation of the cutting configurations at the corner.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.195-204
• /
• 2001

Virtual computer numerical control(VCNC) arises from the concept that one can experience pseudo-real machining with a computer-numerically-controlled(CNC) machine before actually cutting an object. To achieve accurate VCNC, it is important to determine abnormal behavior, such as chatter, before cutting. Detecting chatter requires an understanding of the dynamic cutting force model. In general, the cutting process is a closed loop system that consists of structural and cutting dynamics. Machining instability, namely chatter, results from the interaction between these two dynamics. Several previous reports have predicted stability for a single path, using a simple cutting force model without tool runout and penetration effects. This study considers both tool runout and penetration effects, using experimental modal analysis, to obtain more accurate predictions. The machining stability in the corner cut, which is a typical transient cut, was assessed from an evaluation of the cutting configurations at the corner.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1166-1169
• /
• 2005

This paper describes a new transient voltage suppressor(TVS) with a low insertion loss and a high cut-off frequency to protect antenna circuit from transient voltages. Conventional protection devices have some problems such as a low frequency bandwidth and a high insertion loss. In order to improve these limitations, a coaxal type TVS, which consists of a gas tube is developed. The performance of the proposed transient voltage suppressor is tested by using a combination surge generator specified in IEC 61000-4-5 standard and by using a network analyzer of 40 MHz ${\sim}$ 5 GHz bandwidth. From the experimental results, it is confirmed that the proposed TVS has an enough protection performance in a low insertion loss and a high cut-off frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.693-696
• /
• 2005

Parallel and cross of the electrical power and telecommunication network is become accelerated, because telecommunication equipments are constructed according to road for efficient maintenance of domestic telecommunication network. The electrical power network can generate an electrostatic induction, and is itself transmission medium from electrical transient phenomenon such as lighting. So, transient phenomenon of lightning surge is induced to telecommunication network, and then it is damaged by connecting between electrical ground of electrical power network and telecommunication network. In this study, we found that cut-off of return path current by separate distance between electrical ground of electrical power network and telecommunication network, and cut-off of electrostatic induction voltage by grounding unused leads of both terminals of the electrical and telecommunication network have good effect as the protection methods of telecommunications network from electrical transient phenomena.

• 전기의세계
• /
• v.17 no.4
• /
• pp.18-27
• /
• 1968

Analysis of the transient stability of power systems following disturbances involves many sets of non-linear differential equations. This paper attempts to analyze the transient stability of multi-machine power systems by the step by step method, using the electronic digital computer. The critical switching times and phase angles for the main 154KV transmission system in Korea, are given from the swing curves of the probable conditions. It is concluded that the system is, in general, stable if the relay is cut off within 12 cycles after the fault. However the fault of DAEGU-SANGJU branch, accompanying much real power, makes the system unstable when the raly is cut off within 4 cycles after fault or automatic voltage regulators are equipped in this branch.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.447-452
• /
• 2001

In most of the existing mechanistic models, the cutting process simulation is often restricted to a single path machining operation under a fixed cutting condition. Complex cutting processes such as die or mold manufacturing, however, are performed under two- or three-dimensional multiple tool paths. Since the tool paths in CNC machining are composed of line and arc segments, transient cuts are frequently occured due to the multiple paths. Even in steady cuts, the width of cut is varied with each segment. In this regard, this paper deals with the development of process simulation system for transient cuts, where continuously changing cutting configuration is computed, and then the cutting forces are predicted.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.84-87
• /
• 1996

This paper presents a energy function to reflect the control effect of speed governor which has a cut-off property which means position and rate limit The proposed energy function satisfies the semi-negativeness of its time derivative and well reflects the parameters of speed governor to the energy function. The transient stability analysis by the direct method for the single machine infinite bus system has been conducted with the use of the proposed energy function, which shows that the results by the direct method well agree with that by the conventional time simulation method. This thesis shows a possibility of more accurate stability analysis by taking into account the cut-off property of speed governor's output.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.6
• /
• pp.50-59
• /
• 1994

Spectral analysis of transient elastic waves were carried out in order to identify the propagation modes in glass and unidirectional carbon fibre reinforced plastic (CFRP) plates. Pencil leads were broken on the surface of plates to generate elastic waves, and two broad band transducers of 6.35 mm in diameter and 10 MHz center frequency were placed at the linear location from the source. The frequency spectra of detected signals showed that the wave propagation in the plates obeyed the Lamb wave dispersion relation. The transient signals were the fast propagating modes around maximum group velocity of the lowest and first order symmetric $modes(S_{0} and S_{1}),$ and first order antisymmetric $mode(A_{1})$. The transient signals were not severely distorted due to relatively small dispersion of those modes around the maximum group velocity. The fastest propagating mode in the plates was shown to be $S_{0}$ mode less the than cut-off frequency of $A_{1}$ mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1169-1176
• /
• 2000

In this paper, label assignment schemes considering the IP flow model for the efficient MPLS traffic engineering are proposed and evaluated. Based on the IP flow model, the IP flows are classified into transient flows and base flows. Base flows, which last for a long time, transmit data in high bit rate, and be composed of many packets, have good implications for the MPLS traffic engineering, because they usually cause network congestion. To make use of base flows for the MPLS traffic engineering, we propose two base flow classifiers and label assignment schemes where transient flows are allocated to the default LSPs and base flows to explicit LSPs. Proposed schemes are based on the traffic-driven label triggering method combined with a routing tabel. The first base flow classifier uses both flow size in packet counts and routing entries, and the other one, extending the dynamic X/Y flow classifier, is based on a cut-through ratio. Proposed schemes are shown to minimize the number of labels, not degrading the total cut-through ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.20-27
• /
• 2003

In this paper, the fuel transport characteristics during transient condition was studied by using a Fast Response Flame Ionization Detector(FRFID). The quantitative measurement method for the inducted fuel mass into cylinder is studied. The inducted fuel mass into the cylinder was estimated by using calculated air-fuel ratio by hydrocarbon concentration of cylinder and air flow model. In order to estimate the transportation of injected fuel from the intake port into cylinder, the wall wetting fuel model was used. The two coefficient $\alpha$,$\beta$) of the wall-wetting fuel model was determined from the measured fuel mass that was inducted into the cylinder at the first cycle after injection cut-off To reduce an air/fuel ratio fluctuation during rapid throttle opening, the appropriate fuel injection rate was obtain from the wall wetting model with empirical coefficients. Result of air/fuel ratio control, air/fuel excursion was reduced.