• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권10호
• /
• pp.912-924
• /
• 2003

설계 재구조화는 설계 구성 요소들을 재조직함으로써 품질을 향상시켜 소프트웨어 유지보수 비용을 줄인다. 객체지향 메트릭은 설계 결함을 발견하고 설계 구성 요소들을 재조직하기 위한 변형을 찾는데 도움을 제공한다. 기본적으로 이러한 설계 변형은 초기 시스템의 행위를 보존해야 한다. 본 논문에서는 객체지향 설계 행위를 보존하는 메트릭 기반 재구조화 기법을 집합론에 기반하여 기술하고, 자바로 작성된 응용 프로그램에 적용하여 유효성을 확인한다. 그리고 재구조화의 효과성을 확인하기 위하여 시뮬레이티드 어닐링(simulated annealing) 알고리즘을 사용한 방법과 비교한다.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.414-419
• /
• 2006

The paper presents information concerning metrological and technical characteristics of KTU-Griff-Tester device, the optimization of its parameters and the cases of its application. It was defined that the behaviour of textile material during its extraction through a rounded hole depends upon its structure. Variations of geometrical shape of woven and knitted specimens can be described by mathematical expressions of shortened epicycloids and Cassini ovals. It is shown that waving process of disc shaped specimen can be predicted on the basis of the law of sine curve. The examples of textiles treatment with different types of commercial softeners are presented, herewith showing the suitability (sensitiveness) of the new device to detect the changes of textile hand. Meantime it is shown that the level of materials anisotropy can be decided on the basis of transformations of specimen's geometrical shape.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.367-370
• /
• 2005

This paper proposes a novel method for content-based watermarking based on feature points of an image. At each feature point, watermark is embedded after affine normalization according to the local characteristic scale and orientation. The characteristic scale is the scale at which the normalized scale-space representation of an image attains a maximum value, and the characteristic orientation is the angle of the principal axis of an image. By binding watermarking with the local characteristics of an image, resilience against affine transformations can be obtained. Experimental results show that the proposed method is robust against various image processing steps including affine transformations, cropping, filtering, and JPEG compression.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.729-735
• /
• 2005

This paper has dealt with the characteristics of mass and heat transfer of vertical flat plate with free convection. The theory of similarity transformations applied to the momentum and energy equations for free convection. To derive the similarity equation of mass transfer. the equation for conservation of species was added to the continuity. momentum and energy equations. The momentum, energy and species equations set numerically to obtain the velocity, temperature and mass fraction of species as dimensionless. For cases where momentum transport dominates, the thermal boundary layers are shorter than the momentum boundary layer. The relationships between momentum, energy and species were clarified from this study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.779-784
• /
• 2005

This paper presents the theory of similarity transformations applied to the momentum and energy equations for laminar, forced, external boundary layer flow over a horizontal flat plate which leads to a set of non-linear, ordinary differential equations of phase change material slurry(PCM Slurry). The momentum and energy equation set numerically to obtain the non-dimensional velocity and temperature profiles in a laminar boundary layer are solved. The heat transfer characteristics of PCM slurry was numerically investigated with similar method. It is clarified that the similar solution method of Newtonian fluid can be used reasonably this type of PCM slurry which has low concentration. The data of local wall heat flux and convective heat transfer coefficient of PCM slurry are higher than those of water more than 150$\~$200$\%$, approximately.

• 응용통계연구
• /
• 제19권2호
• /
• pp.283-290
• /
• 2006

일반적으로 Box-Cox변환과 같은 류의 멱변환은 분산 안정화 혹은 분포의 대칭성 향상 등을 목적으로 사용된다. 그러나 원 자료의 평균의 크기가 크면서 분산이 상대 적으로 작은 경우, 즉 변동계수가 작은 경우에는 제대로 작동하지 않는 것이 알려져 있다. 본 논문에서는 이러한 문제점을 해결하기 위한 이동-멱변환을 제안하고 모의실험과 실제 자료 분석을 통하여 그 효과를 확인하였다.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.1001-1005
• /
• 2001

In this study, the surface of 40Cr steel was hardened by $CO_2$Laser, and then the microstructural transformations and the hardness distributions of the laser surface hardened layer were observed. The experimental results showed the surface hardening layer was consisted of three parts, which is outmost surface layer of needle martensite, middle layer of martensite and remained pearlite, and transitory boundary layer. In hardness distributions, the surface hardeness of the surface hardening layer had Hv 800~1000, that was 2 to 4 times of matrix's hardness. The hardeness distribution of laser hardening layer that of surface layer hardened by general heat treatment.

• 대한수학회보
• /
• 제52권2호
• /
• pp.377-394
• /
• 2015

In this paper, we generalize some results about Bertrand curves and Razzaboni surfaces in Euclidean 3-space to the case that the ambient space is Minkowski 3-space. Our discussion is divided into three different cases, i.e., the parent Bertrand curve being timelike, spacelike with timelike principal normal, and spacelike with spacelike principal normal. For each case, first we show that Razzaboni surfaces and their mates are related by a reciprocal transformation; then we give B$\ddot{a}$cklund transformations for Bertrand curves and for Razzaboni surfaces; finally we prove that the reciprocal and B$\ddot{a}$cklund transformations on Razzaboni surfaces commute.

• 대한수학회보
• /
• 제55권4호
• /
• pp.1231-1240
• /
• 2018

In this paper, we characterize the conformal transformations between two almost regular (${\alpha},{\beta}$)-metrics. Suppose that F is a non-Riemannian (${\alpha},{\beta}$)-metric and is conformally related to ${\widetilde{F}}$, that is, ${\widetilde{F}}=e^{{\kappa}(x)}F$, where ${\kappa}:={\kappa}(x)$ is a scalar function on the manifold. We obtain the necessary and sufficient conditions of the conformal transformation between F and ${\widetilde{F}}$ preserving the mean Landsberg curvature. Further, when both F and ${\widetilde{F}}$ are regular, the conformal transformation between F and ${\widetilde{F}}$ preserving the mean Landsberg curvature must be a homothety.

• Journal of Astronomy and Space Sciences
• /
• 제37권3호
• /
• pp.165-170
• /
• 2020

Muons and neutrons are representative secondary particles that are generated by interactions between primary cosmic ray particles (mostly protons) and the nuclei of atmospheric gas compounds. Previous studies reported that muons experience seasonal variations because of the meteorological effects of temperature. The intensity of neutrons has a typical modulation with various periods and reasons, such as diurnal and solar variation or transient events. This paper reports that cosmic ray particles, which were observed by neutron monitors, have seasonal variations using the daily data at the Oulu neutron monitor. To eliminate the effects of solar activity across time, the daily data were normalized by two different transformations: transformations with respect to the grand mean and yearly mean. The data after transformation with respect to the yearly mean showed more statistical stability and clear seasonal variations. On the other hand, it is difficult to determine if the seasonal variation results from terrestrial effects, such as meteorological factors, or extraterrestrial effects, such as the position of the Earth in its orbit of revolution.